Hazardous Location Fluorescent Cls I Div. 2 

Hazardous Location Fluorescent Cls I Div. 2 (17w 263 MA 24 inch F17T8 Lamp) 1 Lamp

Housing available in:
Available in type 304 stainless steel with a natural finish and stainless steel mounting fittings or in copper free aluminum with an oven-cured polyester powder coat protective finish and aluminum mounting fittings with a natural finish.

Shoc♦Loc™ bi-pin spring loaded lampholders for double ended lamps provide a positive contact and resistance to shock and vibration while maintaining positive electrical pin contact. Standard for T5, T8 and T12 lamp types.

• External stainless steel hardware for maximum corrosion resistance.

• Stainless steel cable lens retainers for maximum durability and hands free lamp replacement.

• Stainless steel over the center cam latches and a one piece neoprene gasket for a watertight seal.

• Stainless steel spring style mounting feet.
  Low temperature rated ballast 0º F (-18º C) standard on T5 and T8; T12 HO linear fluorescents -20º F (-29º C).

• Marine Outside Type Saltwater (option WT):

• Allows outside type salt water applications.

• Low temperature (0º F) ballast for reliable starting in cold weather.

• Two nonmetallic cable glands provided as standard.
  
  Three lamp models are provided with (1) single lamp ballasts and (1) two lamp ballasts for independent switchingor filter tube options.

• UL 844 - Hazardous Location

• Class I Division 2 Groups A, B, C and D

• Class I Zone 2 Groups IIA, IIB, IIB+ H2 and IIC

• UL 924 - Emergency Lighting Equipment

• UL 1598A - Marine Outside Type Saltwater CSA

• Class I Division 2, Groups A, B, C and D

• Class II Division I, Groups E, F and G Class III

• IP 66

• Type 4X

• ABS