Corrosive Environments Fluorescents
Additional Photo Views
Corrosive Environments Fluorescents (FAS 17w 265 MA 24inch T8 Lamp)
Housing available in:
• FAS - Copper free aluminum
• FPS - Fiberglass reinforced polyester
• FSS - Stainless steel with natural finish
Shoc♦Loc™ bi-pin spring loaded lampholders for double ended lamps provide a positive contact and resistance to shock and vibration while maintaining positive electrical pin contact. Standard for T5, T8 and T12 lamp types.
External stainless steel hardware for maximum corrosion resistance.
Stainless steel cable lens retainers for maximum durability and hands free lamp replacement.
Stainless steel over the center cam latches and a one piece neoprene gasket for a watertight seal.
- Stainless steel spring style mounting feet.
Low temperature rated ballast 0º F (-18º C) standard on T5 and T8; T12 HO linear fluorescents -20º F (-29º C).
- Marine Outside Type Saltwater (option WT):
- Allows outside type salt water applications.
- Low temperature (0º F) ballast for reliable starting in cold weather.
- Two nonmetallic cable glands provided as standard.
Three lamp models are provided with (1) single lamp ballasts and (1) two lamp ballasts for independent switchingor filter tube options.
Mil-spec alternative (option MIL):
• 10 feet of low smoke cable provided.
• Mounting footprint matches symbol 77.4
(1 and 2 lamp) and symbol 333.1 (3 lamp).
• Lamps included.
Approvals
UL 1598A - Marine Inside Drip Proof Type
UL 1598A - Marine Outside Type Saltwater (WT option)
Type 4X (WT Option)
UL 924 -
HOUSING
FAS - Copper free aluminum with an oven-cured polyester powder coated protective finish, FPS - Fiberglass reinforced polyester with a natural finish, FSS - Stainless steel with a natural finish.
LAMP TYPE
T5, T8 and T12 models use standard lamps dependant on wattage, but are not provided. Compact fluorescent versions are available in two and four lamp 40w and 55w luminaires. Compact fluorescent are supplied with lamps. MIL-SPEC option includes lamps.
BALLAST
A High Power Factor (HPF) 120v 60Hz ballast is supplied as standard. 17w, 24w, 32w, and 54w luminaires as well as 40w and 55w compact fluorescent luminaires are rated for starting in temperatures down to 0º F (-18º C) and 35w and 60w luminaires in temperatures down to -20º F (-29º C). 20w and 40w luminaires are 50º F (10ºC). Other voltage options and emergency ballasts also available. All ballast electronic with the exception of 20w T12. Magnetic ballasts are available, please contact factory.
GASKETS
One piece extruded neoprene gasket provides a watertight seal between the lens and housing.