4-inch Low Voltage Type IC, New Construction Housing 

4-inch Low Voltage Type IC, New Construction Housing

4-inch Low Voltage,
Type IC, New Construction Housing
(Lamps not included)

Applications - For use in insulated ceilings and can be installed in direct contact with insulation.

Features:

• Ceiling Cut-Out: 4-3/8 in.

• Plaster Frame: 5-1/2 in.W x 8 in.L

• Lamp: Max (1) 12V, 50W MR16

• Lamp Base: 2-pin GU5.3

• 120V Magnetic Transformer

• UL, cUL listed for use in damp locations

• Integral thermal protector guards against improper lamping

• 120V magnetic transformer steps line voltage down to lamp operating voltage

• J-box is listed for eight (4in - 4out) No. 12AWG (90 degrees C) through-branch circuit conductors and has five 1/2 in., one 3/4 in. and four knockouts with true pry out slots

• Knockouts include built in strain relief - no additional clamps required

• Pre-installed hanger bars allow housing to be positioned at any point within 24 in. joist span. Score lines provided for easy field shortening to accommodate 12 in. joist span

• Hanger bars can easily be field repositioned 90 degrees on the plaster frame

• Hanger bars are designed to fit on to T-Bar spine for quick alignment and can be permanently secured without the need for additional clips

• Housing adjusts for ceilings up to 1-3/8 in. thick

• 7-3/4 in. height allows for use in 2 in. x 8 in. joist construction (when used with minimum of 1/2 in. thick ceiling)

• Sealed and gasketed construction limits air exchange between the ceiling plenum and heated or air conditioned areas- performance tested to ASTM-E283 (Washington State)

• Meets State of California Title 24 requirements

• 1-year warranty