Deep Parabolic TEP 2 x 2  

Deep Parabolic TEP 2 x 2

Housing: Die-formed heavy gauge steel with high-gloss baked white enamel finish (minimum reflectance 86%) over rust inhibiting phosphate coat. X prefix specifies durable high gloss powder coat post paint finish (90% reflectance) over rust inhibiting phosphate coat. Full black reveal with “T” hinges allowing access from either side. Access plate providing two knockouts and ground screw included.

Shielding: Low iridescence, anodized, semispecular aluminum parabolic, nominal 3" deep-cell louver held securely by steel latches. Electrical: Fully wired for 120V, 60Hz AC operation, thermally protected, automatic resetting, Class P, sound rated A, high-power factor ballast, unless otherwise specified. Electronic T8 shall be instant start, <20% harmonic distortion standard, specify suffix UNV for <10% harmonic distortion. Specify suffix UNV for universal voltage, 120 through 277V, 50/60Hz AC operation, Electronic T8 only. End of life protection is standard on twin tube fixtures. UL and C-UL listed.

Mounting: Optional EC515 Earthquake Clip for lay-in TEP grid ceilings. Specify FEP for flange unit or use GCK kit. Flanged units require field assembly. Specify SEP for surface unit.

Critical Application: Warehouse-Lighting.com strives to offer the most current product designs and value. Consequently, all Warehouse-Lighting.com products are subject to redesign and revision. Critical applications such as size, operating temperature, or sensor operation should be confirmed with the factory.