Parabolic Troffer TEP 2 x 4, 18 Cell
Parabolic Troffer TEP 2 x 4, 18 Cell
Housing: Die-formed heavy gauge steel with high-gloss baked white enamel finish (minimum reflectance 86%) over rust inhibiting phosphate coat. X prefix specifies durable high gloss powder coat post paint finish (90% reflectance) over rust inhibiting phosphate coat. Full black reveal with “T” hinges allowing access from either side. Access plate providing two knockouts and ground screw included.
Shielding: Low iridescence, anodized, semispecular aluminum parabolic, nominal 3" deep-cell louver held securely by steel latches. Electrical: Fully wired for 120V, 60Hz AC operation, thermally protected, automatic resetting, Class P, sound rated A, high-power factor ballast, unless otherwise specified. Electronic T8 shall be instant start, <20% harmonic distortion standard, specify suffix UNV for <10% harmonic distortion. Specify suffix UNV for universal voltage, 120 through 277V, 50/60Hz AC operation, Electronic T8 only. UL and C-UL listed.
Mounting: Optional EC515 Earthquake Clip for lay-in TEP grid ceilings. Specify FEP for flange unit or use GCK kit. Flanged units require field assembly. Specify SEP for surface unit.
Critical Application: SIMKAR strives to offer the most current product designs and value. Consequently, all SIMKAR products are subject to redesign and revision. Critical applications such as size, operating temperature, or sensor operation should be confirmed with the factory.
Lamps Are Not Included
FEATURES AND BENEFITS
3" deep cell parabolic= High efficiency with uniform low brightness in the 60 degree to 90 degree zone
Protective poly sheet= Keeps louver clean during shipment and installation
Semi-specular aluminum parabolic standard= Low iridescence
“T” hinges= Allows access from either side