Can't find it? Call us toll free... 888-454-4480 M-F 7am-6pm Central

Checkout

Industrial and commercial lighting at wholesale prices

Live Chat LIVE CHAT
Call us toll free...888-454-4480
   
 
Ask a question about this product!
  • Usually Ships Next Day

QUESTIONS? Let us help... call toll free 888-454-4480 CHAT LIVE with us now!

Description

Features: Lamps are NOT included AIRTIGHT - meets IECC Energy Code. (Less than 2 CFM leakage at 1.57 PSI) Performance tested per ASTM E283-84 Ceiling Cut-Out: 6-3/8 in. Plaster Frame: 7-5/8 in.W x 12-1/2 in.L Lamp: One 13W Lamp Base: 4-pin G24q-1 or GX24q-1 Minimum Starting Temperature: -18 degree C (0 degree F) 120V electronic NPF ballast UL, cUL listed for use in damp locations (wet location trims available) Thermally protected, fused, 120v electronic ballast with end-of-lamp-life protection J-box is listed for eight (4in - 4out) No. 12AWG (90 degrees C) through-branch circuit conductors and has five 1/2 in., one 3/4 in. and four Romex knockouts with true pry out slots Romex knockouts include built in strain relief - no additional clamps required Pre-installed hanger bars allow housing to be positioned at any point within 24 in. joist span. Score lines provided for easy field shortening to accommodate 12 in. joist span Hanger bars can easily be field repositioned 90 degrees on the plaster frame Hanger bars are designed to fit on to T-Bar spine for quick alignment and can be permanently secured without the need for additional clips Meets stringent energy star requirements, including FCC title 47 CFR part 18 for consumer equipment Housing adjusts for ceilings up to 1-3/8 in. thick 7-1/2 in. housing height allows use in 2 in. x 8 in. joist construction Sealed and gasketed construction limits air exchange between the ceiling plenum and heated or air conditioned areas - performance tested to ASTM-E283 (Washington State) Meets State of California Title 24 requirements 2-year warranty
  • AIRTIGHT - meets IECC Energy Code. (Less than 2 CFM leakage at 1.57 PSI) Performance tested per ASTM E283-84
  • Ceiling Cut-Out: 6-3/8 in.
  • Plaster Frame: 7-5/8 in.W x 12-1/2 in.L
  • Minimum Starting Temperature: -18 degree C (0 degree F)
  • 120V electronic NPF ballast
  • UL, cUL listed for use in damp locations (wet location trims available)
  • Thermally protected, fused, 120v electronic ballast with end-of-lamp-life protection
  • J-box is listed for eight (4in - 4out) No. 12AWG (90 degrees C) through-branch circuit conductors and has five 1/2 in., one 3/4 in. and four Romex knockouts with true pry out slots
  • Romex knockouts include built in strain relief - no additional clamps required
  • Pre-installed hanger bars allow housing to be positioned at any point within 24 in. joist span. Score lines provided for easy field shortening to accommodate 12 in. joist span
  • Hanger bars can easily be field repositioned 90 degrees on the plaster frame
  • Hanger bars are designed to fit on to T-Bar spine for quick alignment and can be permanently secured without the need for additional clips
  • Meets stringent energy star requirements, including FCC title 47 CFR part 18 for consumer equipment
  • Housing adjusts for ceilings up to 1-3/8 in. thick
  • 7-1/2 in. housing height allows use in 2 in. x 8 in. joist construction
  • Sealed and ga
    • Product Reviews

      Write a review

      © 2017 Warehouse-Lighting.com