6-inch Horizontal Lamp Compact Fluorescent,
Type Non-IC, New Construction Housing for (2) CFL double-tube lamp
(Lamps not included)
Applications - For use in non-insulated ceilings or where insulation can be kept 3 in. from housing.
- Ceiling Cut-Out: 6-1/2 in.
- Plaster Frame: 7-5/8 in.W x 12 in.L
- Lamp: Two 26W
- Lamp Base: 4-pin G24q-3
- 120V through 277V electric HPF ballast
- UL, cUL listed for use in damp locations (wet location trims available)
- Thermally protected Class P magnetic ballast
- Universal voltage (120V through 277V) electronic ballast with end-of-lamp-life protection
- J-box is listed for eight (4in - 4out) No. 12AWG (90 degrees C) through-branch circuit conductors and has five 1/2 in., one 3/4 in. and four Romex knockouts with true pry out slots
- Knockouts include built in strain relief - no additional clamps required
- Remodel unit has eight 1/2 in. and four Romex knockouts
- Pre-installed hanger bars allow housing to be positioned at any point within 24 in. joist span. Score lines provided for easy field shortening to accommodate 12 in. joist span
- Hanger bars can easily be field repositioned 90 degrees on the plaster frame
- Hanger bars are designed to fit on to T-Bar spine for quick alignment and can be permanently secured without the need for additional clips
- New construction housing adjusts for ceilings up to 1-3/8 in. thick
- Remodel units come complete with three remodel clips to accommodate ceiling thickness from 3/8 in. to 5/8 in.
- 7-1/2 in. height allows for use in 2 in. x 8 in. joist construction
- 1-year warranty
- Lamps are not included