Can't find it? Call us toll free... 888-454-4480 M-F 7am-6pm Central


Industrial and commercial lighting at wholesale prices

Call us toll free...888-454-4480
Ask a question about this product!
  • Width: 1.75 in.
  • Depth: 1.81 in.
  • Brand: Wattstopper
  • Length: 2.69 in.
  • Warranty: 5 Years
  • Voltage: 120-277V

QUESTIONS? Let us help... call toll free 888-454-4480 CHAT LIVE with us now!


The InteliSwitch��_ AS-100 Automatic Control Switch operates as both a manual and automatic control device. Manually, it allows users to control loads on/off. Automatically, it receives signals to turn lighting on or off from lighting control panels or other lighting control systems.

The AS-100 replaces a standard wall switch.
Occupants turn the lights on and off manually by its pushbutton. However, when a timed power interrupt signal is received from a lighting control panel, the AS-100 is automatically commanded to turn on, turn off or delay off. The duration of the power interrupt signal determines how the AS-100 will operate. Used with a lighting control panel, the AS-100 allows users to manually turn lighting on in private offices, while lighting in common areas turns on automatically. After hours, if lights were not shut off by users, a signal from the control panel would command the switch to delay off. Lighting ��_blink��_ warns users that lights will turn off in five minutes. The locator LED on the AS-100 blinks and an audible beep sounds (if enabled). If the button is pushed during this five minutes, the shutoff will be cancelled and the switch will remain on until the next commanded shutoff signal.

Since signaling is accomplished through power interruption, the AS-100 does not require additional signal wiring from a lighting control system or panel. It is designed for easy retrofit of lighting shutoff control in buildings. This greatly reduces installation labor and costs, making it an economical and effective lighting control strategy.

  • Settings are selected with the front pushbutton using configuration LEDs; face plate does not need to be removed for setup
  • Users can select automatic-on operation, and an audible beep warning
  • Selectable beep warning sounds every minute during last five minutes, and every five seconds during last minute
  • Five minute delay-off time with user ability to cancel impending shutoff
  • Self-adjusting zero crossing switching for consistent, reliable operation of high inrush loads
  • Can be used in 3-way, 4-way and multiway switching applications
  • Compatible with all electronic ballasts and motor loads
  • Microcontroller enhances reliability
  • Command off without delay off time
  • Qualifies for use in ARRA-funded projects

Product Reviews

Write a review

© 2016