The right drill bits can help you make holes for rigging chains and fixtures, as well as a host of other tasks to get various lighting jobs done. We also offer blades which have a range of uses in terms of rigging electrical systems, light fixtures, and more.
Features include:
- Magnetic Bit Holder is 2-3/8 in long (extends to 4-3/4 in)
- Holds 1/4 in hex insert bits & accepts #10 & smaller screws
- Heat treated hardened steel bit
- Oversized magnet holds screw in correct starting position
- Outer sleeve slides over screwhead & helps to keep bit in the screwhead recess
- Magnetic Bit Holder Extends power tool reach by reaching limited access areas
- Order Qty of 1 = 1 Piece
Features include:
- One of the most complete Tamperproof Screwdriver Security Bit Sets available anywhere with all of the most common & many of the rarest bits
- Includes magnetic holder & adaptors for power driving
- Includes the following bits
- PH0, PH1, PH2 x 5pcs, PH3
- SL 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mm
- PZ0, PZ1, PZ2 x 5pcs, PZ3
- Spanner 4, 6, 8, 10
- Tri-wing 1, 2, 3, 4
- 4 Square 0, S1, S2, S3
- M 5, 6, 8
- Torq-set 6, 8, 10
- Clutch 1, 2, 3
- 2.4 in.(60mm) L magnetic bit holder
- 1 in.(25mm) L Adaptor
- 2 in.(50mm) L Adaptor
- 1 in.(25mm) L Y-Bit
- 1 in.(25mm) L Bit Holding Socket
- T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-35 T-40 (Tamper Proof)
- T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45
- Hex. 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8mm
- Hex. 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32",3/16",7/32 in 1/4"
- Hex. 2, 2.5, 3, 4, 5, 6mm (Tamper Proof)
- Hex. 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (Tamper Proof)
Features include:
- A 12 Piece Set M42 Bi-Metal For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
- Set Contains Nine High Speed Hole Saws - 3/4 in. - 2-1/2 in., Two Arbors (13456 & 13466), & a 1/4 in Arbor Adapter (13434)
- Saw Diameters are: 3/4 in, 7/8 in, 1-1/8 in,1-3/8 in,1-1/2, 1-3/4 in, 2 in, 2-1/4 in and 2-1/2 in
- Bi-Metal Hole Saw Sets - All Components are Packed In a Sturdy Plastic Molded Carrying Case
- Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
- Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
- Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
- 1-3/4 in Cutting Depth
- 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
- Order Qty of 1 = 1 Set
20 Piece Titanium Coated Drill Bits Set - These High Speed Steel Drill Bits can cover any situation.
Features include:
- (2)1/16 in, 5/64 in, (2)3/32 in, (2)7/64 in, (2)1/8 in, 9/64 in, 5/32 in, 11/64 in, (2)3/16 in, 13/64 in, 7/32 in, 15/64 in, (2)1/4 in, 3/8 in
- Titanium Coated allows for Higher Drilling Temperatures & Increases Life of the Bit 500% Over Uncoated Drill Bits
- M2 Steel for Superior Metal, Wood & PVC Drilling
- 135 Degree Split Point for No Slip Starting
- Self Centering, Reduced Thrust & Easier Penetration
- Bits with Precision Ground Flutes
- Order Qty of 1 = 1 Set
Features include:
- M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
- Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
- Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
- Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
- 1-3/4 in Cutting Depth
- 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
- Packed in Individual Color Boxes
- Dimension Measurements = Inches & (millimeters)
- Order Qty of 1 = 1 Piece
Features include:
- Slow spiral
- High Grade Alloy Steel Shank for Strength and Durability
- Shallow Precision Machined Wide Oval Flutes Lift & Prevents Dust Packing
- Carbide Tip Resists Dulling
- Drills Masonry, Brick, Stone, Plaster, Slate, etc.
- Produces Clean, Accurately Sized Holes Fast
- Packed in Hanging Hard Plastic Tube
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Features include:
- Slow spiral
- High Grade Alloy Steel Shank for Strength and Durability
- Shallow Precision Machined Wide Oval Flutes Lift & Prevents Dust Packing
- Carbide Tip Resists Dulling
- Drills Masonry, Brick, Stone, Plaster, Slate, etc.
- Produces Clean, Accurately Sized Holes Fast
- Packed in Hanging Hard Plastic Tube
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Features include:
- Driller’s Dust Bowl solves the problem of making a mess while drilling large diameter holes in ceiling for the installation of recess light fixture, eliminating the need for face mask, goggles, drop cloths or vacuuming.
- The tool accessory is easily fitted between a drill’s chuck and the cutting tool.
- It forms a seal to the surface of the material being worked on, and collapses like a plunger to allow the user to perform the task while encapsulating all the debris created by the process.
- It works with a wide variety of drill bits, other cutting tools, and all sizes of hole saws.
- Saw Dust Collector Works with tools you already have
- No ceiling marks
- Saw Dust Collector Stops you from punching through once hole is cut
- Order Qty of 1 = 1 Piece
- For use with the Switchblade PRO Cutter
- Quick release blade for easy replacement
- Laser cut
- Unmatched cutting quality
Recessed Lighting Hole Saws - Carbide Grit 6-7/8 in."" features include:
- Carbide Grit Saw is the The perfect choice for quick and easy installation of recessed lighting
- Carbide grit cutting edge easily cuts holes in ceramic tile, fiberglass, marble, slate etc.
- Cuts through stucco, lath, and plaster
- Cuts 1-3/8 in deep - through two sheets of 5/8 in drywall in one pass to a depth of two inches
- Carbide Grit Saw Fits most major brands Halo, Capri, Marco, Juno, Prescolite, Progress, Lithonia, Lightolier, and others
- Strong, durable back plate
- Arbor not included (accepts Morris Arbor #13466, 13468, or 13470)
- Order Qty of 1 = 1 Piece
Below is more info on our Recessed Lighting Hole Saws - Carbide Grit 6-7/8 in."