Welding Shop Lighting

Welding Shop Lighting

When working around potentially dangerous equipment or tools, proper lighting is a matter of safety. With the right lighting in a welding shop, you can ensure accidents and mistakes aren’t a result of poor visibility. This area of lighting can be tricky to figure out. Here are a few tips to help you find the best welding shop lighting applications for your location.

  • When it comes to welding shop lighting applications, the bulb is the most important element. You don’t want to choose a lighting solution that is incapable of keeping up with your needs. For example, lighting solutions that don’t offer the lumen output you need for the space would be a mistake. Calculate the lumens in terms of square space to find the right output.
  • Choose light sources that are long-lasting. Having to constantly change light bulbs or make repairs to an existing fixture is a hassle. If you choose a lighting source now to be long-lasting and high-performing, you can eliminate this routine altogether.
  • Opt for LEDs or induction over fluorescents. While fluorescents were once the standard for all types of settings, they have been slightly replaced by the staying power of LEDs and induction lights. Fluorescents and their cousin, metal halides, need to be changed more often, offer lower efficiency rates, and require more upkeep. Another factor that makes LED and induction better for welding shop lighting applications is that they do not need a warm up period. They are illuminated as soon as you turn them on so you can get right to work.
  • Consider the differences between general lighting and task lighting. General lighting should be bright, but never harsh, and task lighting should be brighter than general lighting and directed to specific areas such as work spaces.
  • For both general and task lighting, avoid glares which may interfere with visibility. A few good ways to combat glare are to choose options with reflectors, diffusers, or with uplight design features.
  • Consider outside influences on lighting solutions. It is important to choose lighting that can withstand the environment of a welder’s shop. A good bet is to check the NEMA, IP, and UL listings and ratings for factors such as dust proof, waterproof, heat and cold limits, and overall recommendations for the fixture.

When choosing this type of lighting, it is important to consider all your options. With a focus on finding the options that will meet your needs, your welding shop will soon be a success.

Check out our selection of Vapor Tight Light Fixtures.