6 products
Push Tie Mounts Accepts .316 in. Wide 120LB Ties
Features include:
- Drill 1/4 in. Hole on Panel, Install Mount, then Insert Tie Into Mount for bundling cables
- Push Tie Mounts are made from UL approved Nylon 6/6, 94V-2
- Accepts up to 120lbs cable tie
- Dimension Measurements = Inches
- Order Qty of 100 = 1 Bag of 100
Saddle Tie Mounts Side Mount 50LB
Features include:
- Saddle Design Tie Mounts provide maximum stability for wire bundles
- To apply, simply fix mount with a screw and secure wire bundles with nylon cable ties
- Saddle Tie Mounts are made from UL approved Nylon 6/6, 94V-2
- #8 Screw Accepted
- Dimension Measurements = Inches
- Order Qty of 100 = 1 Bag of 100
Saddle Tie Mounts Center Mount
Features include:
- Center Tie Mounts Feature Saddle Design provides maximum stability to wire bundles
- To apply, simply fix mount with a screw and secure wire bundles with Nylon cable ties
- Tie Mounts are made from UL approved Nylon 6/6, 94V-2
- #8 Screw Accepted
- Dimension Measurements = Inches
- Order Qty of 100 = 1 Bag of 100
Saddle Tie Mounts Center Mount 120LB (100 pack)
Saddle Tie Mounts Center Mount 120LB - These Center Tie Mounts offer Mechanical Screw Mount for Excellent Mount Integrity.>;
Saddle Tie Mounts Center Mount 120LB features include:
- Center Tie Mounts Feature Saddle Design provides maximum stability to wire bundles
- To apply, simply fix mount with a screw and secure wire bundles with Nylon cable ties
- Tie Mounts are made from UL approved Nylon 6/6, 94V-2
- #8 Screw Accepted
- Dimension Measurements = Inches
- Order Qty of 100 = 1 Bag of 100
Below is more info on our Saddle Tie Mounts Center Mount 120LB
Saddle Tie Mounts Center Mount with Wings 50LB
Features include:
- Center Tie Mount with Wings Feature Saddle Design provides maximum stability to wire bundles
- To apply, simply fix mount with a screw and secure wire bundles with nylon cable ties
- Tie Mounts are made from UL approved Nylon 6/6, 94V-2
- #8 Screw Accepted
- Dimension Measurements = Inches
- Order Qty of 100 = 1 Bag of 100
Wall Plug Mounts
Features include:
- Use Masonry Wall Plug Tie Mounts to affix wire & cable to Masonry permanently with looped cable tie
- Tap Mount into Pre-drilled hole
- Features Concentric Circle Barbs for Extra Holding Strength
- Made from UL Approved Nylon 6/6, 94V-2
- Dimension Measurements = Inches
- Order Qty of 100 = 1 Bag of 100