When it comes to any type of wiring or electrical components, you need the right solution to ensure safety measures are met for added peace of mind. With our selection of cable fittings at the ready, get the right choice for the specifics of your project and location.

Sealing Locknuts, Steel
Features include:
- Sealing locknuts provide a rain-tight seal when securing threaded conduit or connectors with tapered or straight thread, to a knockout or unthreaded slip hole of a box or enclosure
- Sealing Locknut has a Integral Gasket
- Galvanized Steel
- Order Qty of 1 = 1 Piece
ITEM: 14754
Select Product
Grounding Locknuts -Steel
Features include:
- Used with bushings to bond threaded Rigid conduit and IMC to boxes, cabinets, or other enclosures where locknut is exposed
- Grounding locknuts for securing threaded conduit or connectors with tapered or straight thread, to a knockout or unthreaded slip hole in a Box or Enclosure
- Grounding Locknut has Integral Ground Screw to Facilitate Grounding to Enclosure
- Galvanized Steel
- cULus Listed
- Order Qty of 1 = 1 Piece

ITEM: 14744
Select Product
Rigid Water Tight Hubs
Features include:
- To secure threaded Rigid Service Entrance conduit & IMC to box or enclosure in a WaterTight Application
- Assembled with 221;F (105C) rated flame retardant Lexan throat insulator and BUNA-N sealing ring that completely encircles knockout to prevent contaminants from entering enclosure
- For use in Wet Locations
- cULus Listed
- Order Qty of 1 = 1 Piece

ITEM: 14800
Select Product
Aluminum Rigid Conduit Bodies T Type
Features include:
- Provides Access to Conductors for Pulling, Splicing and Maintenance
- Rigid Type T conduit body
- Tapered NPT Threaded Hubs
- Rain Tight When Used with Gasketed Cover
- Cover Not Included
- Die-Cast from High Strength Corrosion and Weather Resistant Copper Free Aluminum Alloy
- Flat Back Design for Easy Mounting Close To Walls
- cULus Listed
- Order Qty of 1 = 1 Pieces

ITEM: 14060
Select Product
Grounding Bushing with Insulated Throat with Aluminum Ground Lug
Features include:
- Used with a locknut to terminate threaded Rigid and IMC conduit to a box or enclosure
- Lug provides for bonding jumper to a neutral bus bar
- Thermoplastic liner prevents damage to wire insulation
- Set-screw provided with each fitting locks bushing in any desired position
- Resists corrosion, chemicals, and temperature extremes
- Die Cast Zinc
- UL/CSA Listed
- Order Qty of 1 = 1 Piece
ITEM: 14570
Select Product
EMT Set Screw Connectors
Features include:
- Use to connect EMT Conduit to Steel Outlet Box, Load Center, or other Metal Enclosures
- Concrete Tight (When Taped)
- Pre-Set/Pre-Staked Combo Head Set-Screws
- Male NPS Hub Thread
- Die Cast Zinc
- UL/CSA Listed
- Order Qty of 1 = 1 Piece
ITEM: 14850
Select Product
Screw-In Couplings for Greenfield/Flex Conduit
Features include:
- Use to connect 2 Sections of Flexible Metallic Conduit
- Zinc Die Cast
- UL/CSA Listed
- Order Qty of 1 = 1 Pieces
ITEM: 15084
Select Product
Straight Squeeze Box Connectors
Features include:
- Used with a locknut to Terminate Steel or Aluminum Flexible Metal Conduit, Armored Cable & MC to enclosure
- Assembled with Zinc Die Cast Locknut & Combo Screws
- Zinc Die Cast
- cULus Listed
- Order Qty of 1 = 1 Pieces

ITEM: 15110
Select Product
Squeeze Box Connectors
Features include:
- Used with a locknut to Terminate Steel or Aluminum Flexible Metal Conduit, Armored Cable & MC to a steel outlet box or other metal enclosure
- Assembled with Zinc Die Cast Locknut & Combo Screws
- Zinc Die Cast
- UL/CSA Listed
- Order Qty of 1 = 1 Pieces
ITEM: 15131
Select Product
EMT to Flex Combination Coupling
Features include:
- Use to join EMT Conduit to Flexible Metal Conduit
- They allow a quick connection between different conduits to create one continuous raceway
- Their smooth interior surface ensures a snag free wire pull every time
- Zinc Die Cast
- Pre-set and staked Robertson Combo head screws
- cULus Listed
- Order Qty of 1 = 1 Pieces

ITEM: 15416
Select Product
EMT to BX or NM Cable Combination Set Screw Coupling
Features include:
- Set Screw 1/2 in. EMT to 2 Screw 3/8 in. BX/NM Cable
- Used on EMT Conduit, BX cable, NM cable
- Allows a quick connection between different conduits to create one continuous raceway
- Zinc Die Cast
- Combo head screws
- cULus Listed
- Order Qty of 1 = 1 Pieces

ITEM: 15411
Select Product
Malleable Reducing Bushing
Features include:
- Reduce the Trade Size of a Tapered Entry on a Conduit Fitting
- Threaded for Rigid and IMC condulets, Hex Shoulder
- Rolled edge protects wire insulation
- Malleable Iron
- Order Qty of 1 = 1 Piece
ITEM: 14700
Select Product
Steel Reducing Bushings
Features include:
- Reduce the Trade Size of a Tapered Entry on a Conduit Fitting
- Threaded for Rigid and IMC condulets, Hex Shoulder
- Rolled edge protects wire insulation
- Order Qty of 1 = 1 Piece
ITEM: 14660
Select Product
Non-Metallic Liquid Tight Connectors With Steel Locknut
Features include:
- For use with Non-Metallica Liquid Tight conduit
- Type B - Nylon construction with Zinc Die Cast Locknut - resists saltwater, gasoline, alcohol, oil and grease
- UV rated for long outdoor life
- cULus Listed
- Order Qty of 1 = 1 Piece

ITEM: 21812
Select Product
1 in., 1/2 in., or 3/4 in. Long Conduit Speed Nipple
1 in. Long Conduit Speed Nipple 1/2 in. - Zinc Die Cast - 1 in. Long Conduit Speed Nipple Used with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box.>;
1 in. Long Conduit Speed Nipple 1/2 in. features include:
- Use with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box
- Use with a Locknut to provide a Short Raceway between Boxes and enclosures
- Die Cast Zinc
- cULus Listed
- Order Qty of 1 = 1 Pieces
Below is more info on our 1 in. Long Conduit Speed Nipple 1/2 in.

ITEM: 14504
Select Product
Rigid Nipples
Features include:
- Use with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box
- Use with a Locknut to provide a Short Raceway between Boxes and enclosures
- Die Cast Zinc
- UL/CSA or cULus Listed
- Order Qty of 1 = 1 Pieces

ITEM: 14480
Select Product
Thermoplastic Conduit Bushings
Features include:
- Threaded plastic inserts for RIGID or IMC conduit
- Use to Protect Conductors in Rigid or IMC Conduit from Abrasion/Damage during Pull
- Thermoplastic material—heat, impact and torque resistance
- Strong reinforcing ribs & rim around bottom
- Flame retardant Polypropylene (Rated to 221;F, 105C)
- 1/2 in wide
- Threaded plastic inserts are UL/CSA Listed
- Dimension Measurements = Inches
- UL/CSA Listed
- Order Qty of 100 = 1 Bag of 100
ITEM: 21732
Select Product
Conduit Bushings
Features include:
- Used with a locknut to terminate threaded Rigid and IMC conduit to a box or enclosure
- Bushings rounded surface prevents damage to wire insulation during pulling
- Zinc Die Cast
- cULus Listed
- Order Qty of 1 = 1 Piece

ITEM: 14530
Select Product
Non-Watertight NM Oval Connectors – Zinc Die Cast
Features include:
- Used with Locknut to Terminate Service Entrance Cable to Enclosure
- For NM Oval Cable
- Assembled with Zinc Die Cast Locknut and Combo Screws
- cULus Listed
- Order Qty of 1 = 1 Piece

ITEM: 15337
Select Product
90 Malleable Concrete Slab Inserts 1/2 in.
Features include:
- Allows In-Slab Ceiling Drops & Floor Mounts in Poured Concrete
- Provides Flush Threaded Conduit Hub for mounting, pulling, & future access to conduit systems
- Design allows In-Slab Conduit System Prefabrication
- Designed to Eliminate Bending of Conduit in Slabs over 4 in. Thick
- Designed for 90; Bends Through Conduit Runs
- cULus Listed
- Concrete Tight
- Order Qty of 1 = 1 Pieces

ITEM: 14423
Select Product
Flex Duplex Box Connectors
Features include:
- Use to connect two pieces of Flexible Metallic Conduit, AC, MC, or NM sheathed cable to a steel box or other metal enclosure when using only one knockout opening: - 14/2 Thru 12/3 NM - 14/2 Thru 10/4 AC - 14/2 Thru 10/3 MC - 3/8 in. FMC
- 3/8 in. size fits 1/2 in. knockout
- 1 Screw design
- Combo Head Screws
- Zinc Die Cast
- cULus Listed
- Order Qty of 1 = 1 Pieces

ITEM: 15065
Select Product
Anti-Short Bushings #0 (35 Pack)
Features include:
- Anti short bushings insulates conductor from cut armor ends on flexible BX or Greenfield conduit
- Inserted in I.D. at termination point
- Overlapping horizontal flange protects against sharp metal edges
- Tapered design assures fast insertion
- Extra length assures positive grip
- Polypropylene material resists weather extremes, oil, moisture and chemicals
- Anti short bushings are rated up to 194;F(90C)
- UL Recognized/CSA Listed
- Order Qty of 1 = 1 Bag of 35
ITEM: 21752
Select Product
Anti-Short Bushings #1 (35 Pack)
Features include:
- Anti short bushings insulates conductor from cut armor ends on flexible BX or Greenfield conduit
- Inserted in I.D. at termination point
- Overlapping horizontal flange protects against sharp metal edges
- Tapered design assures fast insertion
- Extra length assures positive grip
- Polypropylene material resists weather extremes, oil, moisture and chemicals
- Anti short bushings are rated up to 194;F(90C)
- UL Recognized/CSA Listed
- Order Qty of 1 = 1 Bag of 35
ITEM: 21753
Select Product
Anti-Short Bushings #4 (16 Pack)
Features include:
- Anti short bushings insulates conductor from cut armor ends on flexible BX or Greenfield conduit
- Inserted in I.D. at termination point
- Overlapping horizontal flange protects against sharp metal edges
- Tapered design assures fast insertion
- Extra length assures positive grip
- Polypropylene material resists weather extremes, oil, moisture and chemicals
- Anti short bushings are rated up to 194;F(90C)
- UL Recognized/CSA Listed
- Order Qty of 1 = 1 Bag of 16
ITEM: 21756
Select Product
Anti-Short Bushings #3 (20 Pack)
Features include:
- Anti short bushings insulates conductor from cut armor ends on flexible BX or Greenfield conduit
- Inserted in I.D. at termination point
- Overlapping horizontal flange protects against sharp metal edges
- Tapered design assures fast insertion
- Extra length assures positive grip
- Polypropylene material resists weather extremes, oil, moisture and chemicals
- Anti short bushings are rated up to 194;F(90C)
- UL Recognized/CSA Listed
- Order Qty of 1 = 1 Bag of 20
ITEM: 21755
Select ProductWe offer one of the largest selections of cable fittings on the market to ensure you get the right outcome for the task at hand. When shopping for this type of item, you need options that are made with the highest standards in terms of quality and durability. Made with durable metals to ensure a long-lasting addition and an overall attention to quality of design, these cable fittings allow you to buy with confidence with every choice. One of the most popular options we offer are the conduit bodies in various options. Choose from a range of types such as EMT conduits, rigid conduits, and combination options to get the right one for your project. When looking for outdoor-ready cable fittings, we offer several options that are rated for such purpose. Offering the best in durable longevity and safety measures, these items can be found in a range of sizes and types as well. Whether shopping for service entrance connectors, liquid tight connectors, or cable glands, we have everything you need in one convenient location, so you can complete the project to great success. Best of all, when you shop with us, you are choosing with confidence because we only offer the best options on the market. Find the right component for your project today with these reliable and affordable solutions at the ready.
We are your source for a wide range of products from top brands in the industry for manufacturing you can trust. We also pride ourselves on our outstanding customer service reputation. If you have any questions while shopping with us, please reach out for further assistance on the matter today.