LED T8 Lamps

0 products

Sorry, there are no products in this collection.

T8 LED lamps are energy saving LED bulbs that replace traditional fluorescent 32 watt T8s. LED T8s last much longer than traditional florescent T8s, anywhere from 20,000 to 50,000 hours and usually save about 1/3 of the energy. There are 3 types of LED T8 installations to be aware of. First would be internal driver T8 lamp installation where the old ballast is removed and the lamps are installed directly to the sockets in the fixture using unshunted sockets that are wired directly to a power source of 120 or 277 volts. Second is external drivers where the old ballast is removed in the fixture and then a power source of 120 or 277 is wired directly to the driver and then to the lamp using unshunted lamp sockets. This method usually allows the lamps to last a bit longer due to heat distribution. The third install technique would be to directly insert a lamp into the existing T8 sockets in the fixture with the ballast installed that acts a the driver for the new LED T8. The problem with this install is that now you have the old ballast that can go bad in the fixture. Each one of these options needs a lamp specific to that installation. Please call for any questions

T8 LED Lamps choices included

  • Watt Capacity (18, 20, 22 and more)
  • Ballast Compatible (no wiring needed) and Non ballast Compatible (Wiring needed)
  • Voltage (120, 277)
  • Drivers (internal, external)
  • Single end Power (Unshunted tombstones needed) and Double end Power
  • Lamp Length (2 foot, 4 foot, 8 foot)
  • Lumen output
  • Color Temperature (3000K, 3500K, 4100K, 5000K, or 6500K)