Aluminum Mechanical Lugs Panelboard Lugs - 3 Conductors features include:
- Aluminum panelboard lug manufactured from high strength 6061-T6 aluminum alloy to insure both maximum strength and conductivity
- AL9CU Dual rated for both copper and aluminum conductors
- Electro-tin plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Drilling 1-3/8 in Centers
- 3 conductor panelboard lug rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs Panelboard Lugs
Aluminum Mechanical Lugs 4 Conductors - 4 Hole Mount Dual Set Screws Awgfeatures include:
- 4 Mounting Holes in Pad allow for 4 Bolts when Mounting these 4 Conductor Mechanical Lugs
- 4 Conductor Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-Tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- Aluminum Connector is rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs Four Conductors - Four Hole Mount Dual Set Screws
Aluminum Mechanical Lugs 3 Conductors Dual Set Screws - 2 & 4 Hole Mount features include:
- Dual Set Screws for Greater Resistance to Pull Out Force
- Dual Set Screw Two & Four Hole Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-Tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- Aluminum Connector is rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs Three Conductors Dual Set Screws - Two and Four Hole Mount
Aluminum Parallel Groove Clamps 2 Bolts - This Aluminum Parallel Groove Clamp features 2 Bolts. >;
Aluminum Parallel Groove Clamps 2 Bolts features include:
- Our parallel groove clamp is manufactured of extruded aluminum alloy thermically treated, this clamp offers high electrical conductibility, high strength and corrosion resistance
- The set screw, lock washer and nut are hot dip galvanized
- Use for Heavy Duty Service Entrance or Distribution Armored Rod Clamps
- All sizes of groove clamps are packed in plastic bags and filled with antioxidant compound
- Dimension Measurements = Inches
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Parallel Groove Clamps 2 Bolts
Aluminum Parallel Groove Clamps 1 Bolt - This One Bolt Parallel Groove Clamp is thermically treated for durability.>;
Aluminum Parallel Groove Clamps 1 Bolt features include:
- Our parallel groove clamp is manufactured of extruded aluminum alloy thermically treated, this clamp offers high electrical conductibility, high strength and corrosion resistance
- The set screw, lock washer and nut are hot dip galvanized
- Use for Heavy Duty Service Entrance or Distribution Armored Rod Clamps
- All sizes of groove clamps are packed in plastic bags and filled with antioxidant compound
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Parallel Groove Clamps 1 Bolt
Service Post Connectors For Transformer & other Grounding applications 1 Wire #14 - #8features include:
- Used to Ground One Wire to Steel Structures, Transformers, Fence Posts, Steel Bars or Plate.
- UL467 Listed for Direct Burial and Grounding/Bonding Applications
- Lay-In Feature for Continuous Loop Grounding Applications
- High Strength Electrolytic Copper
- Free turning threads and easy to grip wrench flats
- Service Post Connector is highly resistant to season cracking and corrosion
- Rated 600 Volts
- cULus Listed
- Order Qty of 1 = 1 Piece
Below is more info on our Service Post Connectors For Copper Conductors 1 Wire #14 - #8
Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors - Dual Rated Copper and Aluminum Split Bolt Connector.>;
Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors features include:
- AL9CU Dual rated split bolt connector is UL listed for all combinations of Aluminum, Aluminum to Copper, and Copper to Copper stranded wires
- Manufactured from Copper alloy
- Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity
- Spacer separates dissimilar conductors and provides long contact length that prevents high pressure point contacts between run and tap connectors
- Free turning threads and easy to grip wrench flats
- Split bolt connector is highly resistant to season cracking and corrosion
- Anti Oxidant is recommended for all aluminum terminations
- Rated 600 Volts
- UL486B/CSA Listed
- UL467 Listed Suitable for Direct Burial and Grounding/Bonding
- Order Qty of 1 = 1 Piece
Below is more info on our Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum Conductors
Split Bolt Connectors With Spacer For Copper Conductors - This Stranded Wires Connector comes with Spacer for wire seperation.>;
Split Bolt Connectors With Spacer For Copper Conductors features include:
- Stranded wires connector is UL listed for copper and copper weld stranded wires only
- Manufactured from Compact, high strength, high copper alloy
- Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity
- Spacer separates dissimilar conductors and provides long contact length that prevents high pressure point contacts between run and tap connectors
- Free turning threads and easy to grip wrench flats
- Stranded wires connector is highly resistant to season cracking and corrosion
- Rated 600 Volts
- UL486A/CSA Listed
- UL467A Listed for Direct Burial & Grounding/Bonding Applications
- Order Qty of 1 = 1 Piece
Below is more info on our Split Bolt Connectors With Spacer For Copper Conductors
Split Bolt Connectors For Copper Conductors - This Split Bolt Connector for Stranded Wires is durable and easy to use.>;
Split Bolt Connectors For Copper Conductors features include:
- Split bolt connector is UL listed for Copper and Copper weld stranded wires only
- Manufactured from compact, high strength, high copper alloy
- Free running threads and easy to grip wrench flats
- Highly resistant to season cracking and corrosion
- Provides a maximum pressure and ensures a secure connection on all combinations of connectors
- Split bolt connector is rated 600 Volts
- UL486A/CSA Listed
- UL467A Listed for Direct Burial & Grounding/Bonding Applications thru 500MCM
- Order Qty of 1 = 1 Piece
Below is more info on our Split Bolt Connectors For Copper Conductors
Copper Mechanical Single Offset Connectors - Single Offset Mechanical Connectors made from Electrolytic Copper.>;
Copper Mechanical Single Offset Connectors features include:
- Single offset mechanical connectors manufactured from high strength pure Electrolytic Copper to insure both maximum strength and conductivity
- Conductors are inserted between arched pressure bar and V-bottom collar which positions the wire for positive contact and maximum secureness
- Plain Copper finish
- Steel plated screws to prevent rusting
- Mechanical connectors are easy to install with screwdriver, wrench or pliers
- Rated 600 Volts
- UL486A/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Copper Mechanical Single Offset Connectors
Aluminum Mechanical Lugs Panelboard Lugs - 4 Conductors - 3/0 features include:
- Aluminum alloy panelboard lug manufactured from high strength 6061-T6 aluminum alloy to insure both maximum strength and conductivity
- AL9CU Dual rated for both copper and aluminum conductors
- Electro-tin plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Drilling 1-3/8 in Centers
- Aluminum lug rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs Panelboard Lugs - 4 Conductors
Aluminum Mechanical Lugs One Conductor Dual Set Screw - Two Hole Mount 1000MCM-500MCM features include:
- Aluminum Mechanical Lug manufactured from High Strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- Rated 600V 194;F (90C)
- Conductor lug is UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs One Conductor Dual Set Screw - Two Hole Mount with Mounting Hole 1000MCM-500MCM
Aluminum Mechanical Lugs with Turn Prevent One Conductor features include:
- Aluminum Set Screw Connectors with a Turn Prevent on the bottom of the tang to eliminate potential movement of the connector
- Made of 6061-T6 Aluminum Alloy
- Tin Plated for Low Contact Resistance and Corrosion Protection
- Suitable For use with both Copper and Aluminum Conductors
- Rated for Use with 194;F(90C) Cables
- 1 Conductor Turn Prevent lug rated 600V
- UL486B/CSA Listed
- AL9CU Dual Rated
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs with Turn Prevent One Conductor
Aluminum Mechanical Lugs Two Conductors Dual Set Screws - 2 Hole Mount 600MCM - #4 features include:
- Dual Set Screws for Greater Resistance to Pull Out Force
- Dual Set Screw Two Hole Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-Tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- Aluminum Connector is rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs Two Conductors Dual Set Screws - Two Hole Mount 600MCM - #4
Aluminum Mechanical Lugs 4 Conductors - 4 Hole Mount features include:
- 4 Mounting Holes in Pad allow for 4 Bolts when Mounting these 4 Conductor Mechanical Lugs
- 4 Conductor Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-Tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- Aluminum Connector is rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs Four Conductors - Four Hole Mount
Aluminum Mechanical Lugs 3 Conductors - 2 or 4 Hole Mount features include:
- 6 Mounting Holes in Pad allow for either 2 or 4 Bolts when Mounting these 3 Conductor Mechanical Lugs
- 3 Conductor Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-Tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- Aluminum Connector is rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs Three Conductors - Two or Four Hole Mount
Aluminum Mechanical Lugs Two Conductors - 2 Hole Mount 250MCM-#6 Awg features include:
- Two Hole Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-Tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- Aluminum Connector is rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs Two Conductors - Two Hole Mount 250MCM-#6 Awg
Aluminum Mechanical Lugs Two Conductors - One Hole Mount 1/0-#14 Awg features include:
- One Hole Aluminum Mechanical Connector is manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-Tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- 90812~90814 have slotted screws
- Aluminum conductor is rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs Two Conductors - One Hole Mount 1/0-#14 Awg
Aluminum Mechanical Lugs One Conductor - Two Hole Mount 250MCM To #6 features include:
- Slotted Mounting Hole
- Aluminum Mechanical Lug manufactured from High Strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- Rated 600V 194;F (90C)
- Conductor lug is UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs One Conductor - Two Hole Mount with Slotted Mounting Hole 250MCM To #6
Aluminum Mechanical Lugs One Conductor 300MCM-#6 Awg - Two Hole Mount features include:
- Aluminum Mechanical Lug manufactured from high strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-tin plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- NEMA Standard Mounting Hole Drilling 1-3/4 in Centers
- Rated 600V 194;F (90C)
- Conductor lug is UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs One Conductor - Two Hole Mount 300MCM-#6 Awg
Aluminum Mechanical Lugs One Conductor 800MCM-300MCM - One Hole Mount features include:
- One Hole Aluminum Mechanical Lug is manufactured from High Strength 6061-T6 Aluminum Alloy to insure both maximum strength and conductivity
- AL9CU Dual Rated for both Copper and Aluminum Conductors
- Electro-Tin Plated to provide low contact resistance and protection against corrosion
- Assembly can be made with only a screwdriver or allen wrench and they are re-usable
- 90712~90718 have slotted screws
- One Hole Aluminum Mechanical Lug is rated 600V 194;F (90C)
- UL486B/CSA Listed
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Mechanical Lugs One Conductor - One Hole Mount 800MCM-300MCM
Aluminum Splicers/Reducers 2 Screw Aluminum Reducer for copper and aluminum.>;
Aluminum Splicers/Reducers 2 Screw 1/0-#14 features include:
- Aluminum Splice Reducer is AL9CU Dual Rated for both Copper and Aluminum Conductors
- Manufactured from High Strength 6061-T6 Aluminum Alloy to ensure both Maximum Strength and Conductivity
- Electro Tin Plated to provide low contact resistance and protection against corrosion
- 90612~90614 use slotted screws
- 2 Screw Aluminum Reducer is rated 600 Volts
- UL486B/CSA Listed
- Rated for use with Cables up to 194;F(90C)
- AL9CU Dual Rated
- 600 Volt
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Aluminum Splicers/Reducers
Meter Socket Lugs features include:
- 840 common dies - one die installs all sizes
- For meter pan and general application
- Accepts both aluminum and copper conductors
- Meter pan socket lugs are made of high conductivity aluminum
- Connector bores are coated with oxide inhibiting compound
- Tin Plated
- Marked with conductor sizes and die references
- Meet or exceed Class A requirements of ANSI C119.4
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Below is more info on our Meter Socket Lugs