1 in. Long Conduit Speed Nipple 1/2 in. - Zinc Die Cast - 1 in. Long Conduit Speed Nipple Used with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box.>;
1 in. Long Conduit Speed Nipple 1/2 in. features include:
- Use with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box
- Use with a Locknut to provide a Short Raceway between Boxes and enclosures
- Die Cast Zinc
- cULus Listed
- Order Qty of 1 = 1 Pieces
Below is more info on our 1 in. Long Conduit Speed Nipple 1/2 in.
Features include:
- Allows In-Slab Ceiling Drops & Floor Mounts in Poured Concrete
- Provides Flush Threaded Conduit Hub for mounting, pulling, & future access to conduit systems
- Design allows In-Slab Conduit System Prefabrication
- Designed to Eliminate Bending of Conduit in Slabs over 4 in. Thick
- Designed for 90; Bends Through Conduit Runs
- cULus Listed
- Concrete Tight
- Order Qty of 1 = 1 Pieces
Features include:
- Used with a locknut to terminate threaded Rigid and IMC conduit to a box or enclosure
- Bushings rounded surface prevents damage to wire insulation during pulling
- Zinc Die Cast
- cULus Listed
- Order Qty of 1 = 1 Piece
Features include:
- Used with bushings to bond threaded Rigid conduit and IMC to boxes, cabinets, or other enclosures where locknut is exposed
- Grounding locknuts for securing threaded conduit or connectors with tapered or straight thread, to a knockout or unthreaded slip hole in a Box or Enclosure
- Grounding Locknut has Integral Ground Screw to Facilitate Grounding to Enclosure
- Galvanized Steel
- cULus Listed
- Order Qty of 1 = 1 Piece
Features include:
- Conduit locknuts for securing threaded conduit or connectors with tapered or straight thread, to a knockout or unthreaded slip hole
- Galvanized Steel
- cULus Listed
- Order Qty of 100 = 100 Pieces
Features include:
- Used to Join 2 lengths of Threaded Conduit when Neither Can Be Rotated
- Threaded (NPT) for Rigid Conduit and IMC
- Concrete Tight
- cULus Listed
- Order Qty of 1 = 1 Pieces
Features include:
- Connect Thread-less Rigid Conduit to boxes and enclosures
- Malleable Iron
- Concrete Tight
- Male Hub Thread (NPT)
- Zinc Finish
- cULus Listed
- Order Qty of 1 = 1 Pieces
Features include:
- Connect 2 Sections of Thread-less Rigid Conduit
- Malleable Iron
- Concrete Tight
- Zinc Finish
- cULus Listed
- Order Qty of 1 = 1 Pieces
Features include:
- Used as A Speed Union for Economically Joining 2 Threaded Rigid Metal Conduits
- Use where Conduit Runs are Closely Spaced; or Conduit is tight against Wall, Ceiling or other Obstruction
- Use where Conduits cannot be Turned
- A Neoprene Gasket provides a Concrete Tight Seal at the Joint
- Order Qty of 1 = 1 Pieces
Features include:
- Use with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box
- Use with a Locknut to provide a Short Raceway between Boxes and enclosures
- Die Cast Zinc
- UL/CSA or cULus Listed
- Order Qty of 1 = 1 Pieces
Features include:
- For Connecting Rigid Conduit or IMC to an Outlet Box in Tight Radius Applications where a Full Size Elbow Will Not Fit
- Zinc Die Cast
- NPT Thread
- cULus Listed
- Order Qty of 1 = 1 Pieces
Features include:
- To secure threaded Rigid Service Entrance conduit & IMC to box or enclosure in a WaterTight Application
- Assembled with 221;F (105C) rated flame retardant Lexan throat insulator and BUNA-N sealing ring that completely encircles knockout to prevent contaminants from entering enclosure
- For use in Wet Locations
- cULus Listed
- Order Qty of 1 = 1 Piece