Filter

T8 LED 4 foot Direct Wire and Ballast Compatible Lamps and Bulbs

Supplier of LED T8 4 foot direct wire and ballast compatible Lamps for use with retro fitting current fixtures. These tubes are great for energy saving over your current fluorescent T8 tubes. See the easy savings quickly with just replacing your current fluorescent lamps. Make sure to use a direct wire tube for applications where your ballast will be removed for your fixture. Ballast compatible would be spec'd when using a fixture were the ballast is left to drive the LED 4 foot T8 lamps.  Not all tubes are compatible with all ballast please check requirements first before purchase.
4 products
on sale
SATCO 11.5W T8 LED; Medium bi-pin base; 50000 Average rated hours

SATCO 11.5W T8 LED; Medium bi-pin base; 50000 Average rated hours

  • Brand: SATCO
  • Wattage: 11.5
  • Lamp Shape: T8
  • Base: Medium Bi Pin G13
  • Finish: Gloss White
  • Length: 47.7 in. - Height: 1.0 in. - Width: 1.0 in.
  • Average Hours: 50000
  • Kelvin: 3500 or 5000
  • CRI: 82
  • UL or ETL Listed: YES
  • UL Classification: cULus - Damp
  • DLC Approved: Yes
  • Warranty: 5 Year Limited
  • Case Quanity: 10
  • Direct Replacement - for use on Instant Start and Rapid Start ballasts with no rewiring required
  • Ballast required. May not be compatible with all rapid start, dimmable, and emergency ballasts.

ITEM: S9939

As low as $13.74
Select Product
on sale
SATCO 11.5W T8 U-Bend LED; 50000 Average rated hours; Medium bi-pin base

SATCO 11.5W T8 U-Bend LED; 50000 Average rated hours; Medium bi-pin base

  • Brand: SATCO
  • Wattage: 11.5
  • Lamp Shape: T8
  • Base: Medium Bi Pin G13
  • Finish: Frosted
  • Length: 23.2 in. - Height: 1.4 in. - Width: 7.5 in.
  • Average Hours: 50000
  • Kelvin: 3000, 3500, 4000 or 5000
  • CRI: 82
  • Lumens: 1700-1800
  • UL or ETL Listed: YES
  • UL Classification: cULus - Damp
  • DLC Approved: Yes
  • Warranty: 5 Year Limited
  • Direct Replacement - for use on Instant Start and Rapid Start ballasts with no rewiring required
  • Ballast required. May not be compatible with all electronic ballasts.






    ITEM: S9994

    As low as $20.64
    Select Product
    on sale
    SATCO 13.5 watt T8 LED; Medium Bi Pin base; 50000 Average rated hours; Dimmable

    SATCO 13.5 watt T8 LED; Medium Bi Pin base; 50000 Average rated hours; Dimmable

    • UPC: 045923119200
    • Voltage: 120
    • Wattage: 13.5
    • Lamp Shape: T8
    • Base: Medium Bi Pin G13
    • Finish: Frosted
    • Length: 48.0 in. - Height: 1.0 in. - Width: 1.0 in.
    • Average Hours: 50000
    • Kelvin: 3000, 3500, 4000 or 5000
    • CRI: 82
    • Lumens: 1700-1800
    • UL or ETL Listed: YES
    • UL Classification: cULus Classified - Damp
    • DLC Approved: Yes
    • Warranty: 5 Year Limited
    • Case Quanity: 25
    • No ballast or external driver required
    • Single ended wiring; Non-shunted socket
    • All glass tube

    ITEM: S11920

    As low as $13.74
    Select Product
    on sale
    SATCO 13W T8 LED; Type A + Type B; Medium bi-pin base; 50000 Average rated hours

    SATCO 13W T8 LED; Type A + Type B; Medium bi-pin base; 50000 Average rated hours

    • Brand: SATCO
    • Voltage: 120-277
    • Wattage: 13
    • Lamp Shape: T8
    • Base: Medium Bi Pin G13
    • Finish: Frosted
    • Length: 48.0 in. - Height: 1.1 in. - Width: 1.1 in.
    • Average Hours: 50000
    • Kelvin: 3000, 3500, 4000 or 5000
    • CRI: 83
    • Lumens: 1800-1900
    • UL or ETL Listed: YES
    • UL Classification: cULus Listed for Type A; cULus Classified for Type B - Damp
    • DLC Approved: Yes
    • Warranty: 5 Year Limited
    • LED Hybrid T8 - Type A + Type B. Direct replacement or by-pass
    • Bypass mode works wired as a single ended lamp on non-shunted sockets or as a double ended lamp on either shunted or non-shunted sockets




      ITEM: S8890

      As low as $14.89
      Select Product