The AFL 18" architectural LED floodlights are designed to replace 250 to 400 watt MH, wall, pole, or ground mounted flood lights and area lights while saving 62% in energy costs and operating for up to 50,000 hours.
HOUSING / LENS / OPTICS Die-cast aluminum housing in bronze finish with thermal shock and impact resistant tempered glass lens. Thermally efficient LED-specific housing with integrated heat sink fins provides for cooler operation and maximum LED operating life. Weatherproof silicone gasketing seals out contaminants. IP65 Rated. Sleek housing gives the AFL an EPA 2.0 sq. ft. The lens door is sealed with four stainless steel tamper-resistant Security Torx T35 screws and features a tempered glass lens sealed in silicone gasketing. Power supply compartment is separated from LED light engines. The AFL is full cutoff and produces zero uplight when mounted horizontally.
LED Available in 2 light levels; 860 0 lumens (116W) and 12,500 lumens (175W) at 4100K CCT;>80 CRI. LED operating life 50,000 hours L70. Light engines consist of 4 or 6 chip-on-board LED arrays mounted direct to thermally efficient aluminum housing.
ELECTRICAL 120-277 VAC power supplies with surge protection, >0.9 power factor. Power supply mounted in direct contact with aluminum housing for cooler operation and longer life. Drive current is 700 mA.
ACCESS / WIRING AFL comes fully wired with 6” cord for quick and easy installation. Unit is standard with tamper-resistant Torx screws; see option T35 for Security Torx T35 screwdriver.
MOUNTING Wall, pole, or gound mounting. 1/2”-13 threads in back of unit. Side 1/2” NPT threads for bracket or yoke mounting. The recommended mounting height of the AFL 116W is 10 to 35 feet. AFL 175W recommended mounting height is up to 45’. Ridgid and adjustable mounting accessories available.
LISTINGS UL Listed wet location.
WARRANTY 5 years