High Bay LED Lighting
Industrial Low Bay Lighting
Industrial Strip Lights
Vapor Tight Lighting
LED Shop Lights
LED Ready Fixtures
Hazardous Area / Explosion Proof Lighting
Loading Dock Lights
Construction / Portable Lighting
High Temperature LED Lights
Industrial Ceiling Fans
LED Work Lights
Networked Controlled Lighting
American Made Industrial Lighting
Clearance
Troffer Lights
LED Flat Panel Lights
Drop Ceiling Lights
LED Ready Troffers
Suspended LED Lights
LED Cylinder Lights
Stairway & Corridor Lighting
Hospital Bed Lights
Wrap Lighting Fixtures
Gooseneck and Barn Lights
Commercial Sign Lights
LED Track Lighting Fixtures & Systems
Recessed Lighting
Wafer Lighting
RGB LED Lights
Exit / Emergency
Refrigeration Lighting
Grow Lights
UV Disinfecting Lights & Air Purifier Fixtures
American Made Commercial Lighting
LED Flood Lights
Outdoor Wall Lights
LED Area Lights
Parking Lot Lights & Poles
Outdoor Post Top Lights
LED Stadium Lighting
Canopy Lights
Security & Motion Sensor Lights
LED Bollard Lights
Outdoor Barn Lights
Solar Powered LED Lighting
Dusk to Dawn Lights
Landscape Lighting
Outdoor String Lights
Coastal Wildlife Lighting
Outdoor House Lights
American Made Outdoor Lighting
Architectural Linear Lights
Architectural Grid Mount Lights
Architectural Round Pendant Lights
Architectural Square Linear Lights
Architectural X-Shaped Linear Lights
Architectural LED Wall Packs
Ceiling Fans
Ceiling Lights
Chandelier Lights
Pendant Lighting
Island Lights
Under Cabinet Lighting
Vanity Lights
Wall Sconces
LED Tape Lights
LED Mirrors
LED Light Bulbs
LED Tube Lights
LED Corn Lights
Vintage LED Bulbs
Decorative LED Bulbs
Fluorescent Light Bulbs
Metal Halide Lamps
LED Magnetic Strip Retrofit Kits
LED Strip Light Retrofit Kits
High Bay LED Retrofit Kits
LED Troffer Retrofit Kits
LED Wall Pack Retrofit
LED Street Light Retrofit Kits
Recessed Lighting LED Retrofit Kits
WareSense Blue - Bluetooth Control System
Ballasts & Drivers
Emergency Ballast For LED & Fluorescent Lights
Electrical Supplies & Mounting Kits
Electrical Tools
Switches & Receptacles
Electrical Power Cords
Sensors and Timers
Smart Home Automation
High Bay Occupancy Sensors
Electric Vehicle Chargers
Hand Dryers
LED Shop Lights
Garage LED Lighting
Gym Lighting
Factory Lights
Restaurant Lights
Office Lights
Classroom Lights
Church Lights
Warehouse Lights
Hospital Lights
Walkway Lights
Parking Lot Lights
Exterior Building Lights
Sports Lighting
Airport Lights
NSF Rated Lights
TAA LED Lighting
Corridor Lights
Barn Lighting
Multi-Family Lighting Solutions
A conference room has to do two opposite jobs. It needs enough light for people to read documents, take notes, and see each other clearly across a table, and it needs to drop low enough that a projected slide or a wall display stays readable. Add hybrid meetings, where cameras are far less forgiving than eyes, and the specification gets tighter still. Browse conference room lighting by fixture type below, or talk to our team about a layout for your space.
809 products
Sale
4 FT LED Direct/Indirect Suspended Linear Fixture, 5500 Lumen Max, Wattage and CCT Selectable, 120-277V, Black, White, or Silver Finish
Sale
6 FT LED Direct/Indirect Suspended Linear Fixture, 8250 Lumen Max, Wattage and CCT Selectable, 120-277V, Black or White Finish
ITEM: BEAMLED6-ADJ-DID-75W-4CT-DMV-BK-G3
Regular price$359.99
$299.99
Sale
8 FT LED Direct/Indirect Suspended Linear Fixture, 11,000 Lumens, Wattage and CCT Selectable, 120-277V, Black, White or Silver Finish
Sale
ITEM: WL-SWLED2-20W-CWS-WH
Regular price$83.99
$69.99
Sale
ITEM: WL-SWLED4-40W-CWS-WH
Regular price$125.99
$104.99
Sale
36" LED Round Pendant Light, 15,600 Lumen Max, Wattage and CCT Selectable, 120-277V, White or Black Finish, Lens
ITEM: WL-RDPND36-120W-5WS-5CCT-DM010-BK
Regular price$515.99
$429.99
Sale
ITEM: WL-RCDL-4-16W-5CCT-UNV
Regular price$39.59
$32.99
Sale
ITEM: WL-RCDL-6-30W-5CCT-UNV
Regular price$52.79
$43.99
Sale
ITEM: WL-RCDL-8-35W-5CCT-UNV
Regular price$61.19
$50.99
Sale
ITEM: WL-RCDL-10-40W-5CCT-UNV
Regular price$70.79
$58.99
Sale
4 FT LED Suspended Linear Fixture G2, 4800 Lumen Max, 40W, CCT Selectable, 120-277V, White or Black Finish
ITEM: BEAMRD-4-40W-4CT-DMV-WH-G2
Regular price$215.99
$179.99
Sale
8 FT LED Suspended Linear Fixture G2, 9600 Lumen Max, 80W, CCT Selectable, 120-277V, White or Black Finish
ITEM: BEAMRD-8-80W-4CT-DMV-WH-G2
Regular price$359.99
$299.99
Sale
ITEM: WL-STLED8-80W-5WS-5CCT-DM010
Regular price$119.99
$99.99
Sale
2 x 2 Foot LED Center Basket Troffer, 5200 Lumen Max, Wattage and CCT Selectable, Dimmable, 120-277V, TAA Compliant
ITEM: WL-TRCBLED-2x2-40W-5WS-5CCT-DM010-TAA
Regular price$77.99
$64.99
Sale
2 x 4 Foot LED Ready 18 Cell Parabolic Troffer, LED T8 Tube Ready (3 Lamps), Non-Shunted, Single/Double Ended, 120-277V
ITEM: WL-PARA-2x4-3LT8
Regular price$179.99
$149.99
Sale
36" LED Round Direct/Indirect Pendant Light, 8000 Lumen Max, Wattage and CCT Selectable, 120-277V, White or Black Finish
ITEM: BEAMPEND-36-ADJ-80W-3WS-4CCT-DM010-BK-G3
Regular price$718.99
$599.99
Sale
24" LED Round Pendant Light, 4000 Lumen Max, Wattage and CCT Selectable, 120-277V, White or Black Finish
ITEM: BEAMPEND-24-4CT-40W-BK-G2
Regular price$479.99
$399.99
Sale
ITEM: WL-SCDL-6-30W-5CCT-UNV
Regular price$59.99
$49.99
Sale
ITEM: WL-SCDL-8-35W-5CCT-UNV
Regular price$71.99
$59.99
Sale
ITEM: WL-BLPLED-2x4-72W-5WS-5CCT-DM010
Regular price$89.99
$74.99
Sale
ITEM: WL-BLPLED-2x2-32W-5WS-5CCT-DM010
Regular price$53.99
$44.99
Sale
Sale
Sale
4 FT LED Direct/Indirect Suspended Linear Fixture, 2" Wide, 4600 Lumen Max, Wattage and CCT Selectable, 120-277V, White or Black Finish
Sale
8 FT LED Direct/Indirect Suspended Linear Fixture, 2" Wide, 9200 Lumen Max, Wattage and CCT Selectable, 120-277V, White or Black Finish
Sale
36" Half Circle LED Direct/Indirect Pendant Light, 2" Wide, 5880 Lumen Max, Wattage and CCT Selectable, 120-277V, White or Black Finish
Sale
ITEM: WL-GFLED-2x4-50W-5WS-5CCT-DM010
Regular price$169.99
$99.99
Sale
4 FT Linear Suspended LED Beam, 4600 Lumen Max, 40W, CCT Selectable, 0-10V Dimmable, 120-277V, Transparent Frosted Housing, Power Feed Cable Included
ITEM: BEAMLED4-TPFR-40W-3CT-DMV
Regular price$191.98
$104.99
LED Conference Room Lighting for Every Part of the Room
Most conference rooms need more than one fixture type. A single layer of overhead light produces a flat room that photographs badly and leaves the presentation wall dim. Specifying an ambient layer, an accent or wall-wash layer, and the controls to move between them is what makes one room work for a board meeting, a video call, and a training session.
Products in this collection cover the following parts of a conference room build:
- LED Flat Panel Lights for grid ceilings, providing the even ambient layer most conference rooms are built around
- Troffer Lights and drop ceiling fixtures in 2x2 and 2x4 sizes that fit straight into an existing acoustic grid
- Recessed Lighting for drywall ceilings where a cleaner aperture is wanted
- Round Pendant Lights for a decorative layer directly over the table, which also brings the source nearer to seated eye level and helps light faces rather than the tops of heads
- Suspended Linear Fixtures for exposed or high ceilings, and for the indirect uplight component that softens faces on camera
- Track Lighting for whiteboard walls, display walls, and artwork, where aiming needs to change as the room is reconfigured
- Dimmers and Controls plus occupancy sensors, which are what let one room serve several modes
The Room Has to Work at Two Different Light Levels
This is the constraint that shapes every other decision. People need roughly 30 to 50 foot-candles on the table to read documents and take notes comfortably, but a projected image or a wall display needs the ambient level well below that to hold contrast. A room lit at one fixed level will always be wrong for one of its two jobs.
The practical answer is to design for the higher level and dim down, since you cannot dim above what the fixtures deliver. That means dimmable drivers throughout and, ideally, separate control zones so the fixtures nearest the screen can come down further than the ones over the table.
Hybrid Meetings Changed the Specification
Once a room is used for video calls, the camera becomes a second and stricter client. Three things matter that would not otherwise:
- Light on faces, not just on the table. Cameras care about vertical illuminance. Downlights placed directly above seated participants throw shadows into eye sockets and under the chin, which reads as unflattering on screen no matter how bright the room measures. Wall wash, indirect uplight from suspended fixtures, pendants that sit nearer eye level, or fixtures positioned in front of participants rather than over them all help.
- Color rendering. A CRI of 90 or higher renders skin tones accurately. Lower-CRI light makes people look gray or sallow on camera in a way that no amount of software correction fully fixes.
- Flicker-free drivers. Inexpensive drivers produce ripple that a camera sensor picks up as banding or a rolling bar, invisible to everyone sitting in the room. Ask about flicker performance before ordering, and test one fixture on the actual camera.
Hold one color temperature across the whole room. Mixing sources within a single camera frame produces a color cast the eye forgives and the sensor does not.
Keep Light Off the Screens
Veiling reflections on a display or a laptop screen are the most common complaint in a conference room, and they are a placement problem rather than an output problem. Fixtures positioned where they can reflect off a wall-mounted display will wash out the image at exactly the viewing angle people sit at.
Fixtures with controlled luminance and good shielding matter here, and the display wall itself is usually better served by keeping general lighting off it and using a separate, dimmable accent layer. If the room has a whiteboard, treat it the same way and light it deliberately with wall-wash rather than hoping the ambient layer reaches it evenly.
Ceiling Type Narrows the Fixture List
- Suspended acoustic grid is the most common conference room ceiling. Flat panels and troffers in 2x2 and 2x4 sizes drop into the existing grid with no ceiling work.
- Drywall or hard ceilings call for recessed downlights, surface-mounted cylinders, or pendants over the table, which give a cleaner look at the cost of a more involved installation.
- Exposed or high ceilings suit suspended linear fixtures, which also let you add an indirect uplight component that a recessed fixture cannot provide.
Coordinate fixture layout with the AV plan and any acoustic treatment before ordering. Ceiling speakers, projector mounts, air diffusers, and acoustic panels all compete for the same grid, and lighting is usually the element asked to move.
Color Temperature
3500K to 4000K suits most conference rooms. The warmer end reads as more comfortable for long meetings and executive spaces, while 4000K feels more alert and pairs well with training rooms and open-plan offices next door. Match the color temperature to the adjacent office areas so the transition through the building looks intentional, and keep it consistent within the room itself.
Controls Are What Make the Room Usable
Conference rooms are occupied in short bursts by people who did not attend the commissioning meeting. Controls that require interpretation get ignored, and the room ends up permanently at full output.
- Scene presets rather than a bank of sliders. Meeting, presentation, video call, and cleaning cover almost every use.
- Occupancy sensors, since conference rooms sit empty a large share of the working day and this is where the energy savings actually come from.
- Daylight harvesting where the room has exterior glazing, which also helps balance window light against fixture output during daytime calls.
- 0-10V dimming is the commercial standard. Verify driver and dimmer compatibility before ordering, and check the low end of the dimming range, since a driver rated to 10% behaves very differently from one rated to 1% when the lights need to go down for a presentation.
If the room integrates with an AV or room-booking system, involve that vendor before the lighting package is finalized. Retrofitting control integration afterward is consistently more expensive than specifying it up front.
Get a Lighting Layout for Your Conference Room
Room dimensions, ceiling height and type, display locations, and whether the space is used for video calls all change the answer. Warehouse Lighting provides free lighting layout assistance for contractors, facility managers, and design teams. Send us the room details and we will come back with fixture types, quantities, and a layout.
Contact UsFAQs About Conference Room Lighting
How bright should conference room lighting be?
Most conference rooms are designed around roughly 30 to 50 foot-candles on the table surface, which is enough to read documents and take notes comfortably. The room also needs to dim well below that for presentations, since a projected image or wall display loses contrast if the ambient level stays high. Design for the higher level and dim down, because you cannot dim above what the fixtures deliver.
What is the best lighting for video conferencing?
Light on faces matters more than light on the table. Cameras respond to vertical illuminance, so fixtures placed directly overhead tend to cast shadows into eye sockets and under the chin. Wall wash, indirect uplight from suspended fixtures, or fixtures positioned in front of participants produce a much better image. Specify a CRI of 90 or higher for accurate skin tones, use flicker-free drivers so the camera does not pick up banding, and keep one color temperature throughout the room.
What color temperature is best for a conference room?
3500K to 4000K covers most conference rooms. The warmer end reads as more comfortable for long meetings and executive spaces, while 4000K feels more alert and suits training rooms. Match the adjacent office areas so the building reads consistently, and hold a single color temperature within the room, which matters especially if the space is used for video calls.
How do you stop glare on screens and monitors?
It is a placement problem more than an output problem. Fixtures positioned where they reflect off a wall-mounted display or laptop screen will wash out the image at the exact angle people are sitting. Use fixtures with controlled luminance and good shielding, keep general lighting off the display wall, and give that wall a separate dimmable accent layer instead. Whiteboards should be lit deliberately with wall-wash rather than relying on the ambient layer to reach them evenly.
Do conference room lights need to be dimmable?
In practice, yes. A conference room has to serve two opposite jobs, bright enough for reading and dim enough for presentations, and a fixed light level will always be wrong for one of them. Specify dimmable drivers throughout, ideally with separate control zones so fixtures near the screen can come down further than those over the table. 0-10V is the commercial standard, and it is worth checking the low end of the dimming range rather than assuming.
What fixtures work with a drop ceiling versus a drywall ceiling?
A suspended acoustic grid, which is the most common conference room ceiling, takes flat panels and troffers in 2x2 and 2x4 sizes that drop straight into the existing grid with no ceiling work. Drywall and hard ceilings call for recessed downlights, surface-mounted cylinders, or pendants over the table, which look cleaner but involve more installation. Exposed or high ceilings suit suspended linear fixtures, which also allow an indirect uplight component that recessed fixtures cannot provide.
How many fixtures does a conference room need?
It depends on room dimensions, ceiling height, fixture output, and the target light level, so a layout is the only reliable way to answer it. As a rough starting point, a typical mid-size conference room with a grid ceiling is often covered by four to eight 2x2 or 2x4 panels for the ambient layer, plus a separate accent or wall-wash layer for the display and whiteboard walls. Uniformity across the table matters more than the raw count.
What lighting controls make sense for a conference room?
Scene presets rather than a bank of sliders, since the people using the room did not attend the commissioning meeting. Meeting, presentation, video call, and cleaning cover nearly every use. Add occupancy sensors, because conference rooms sit empty for much of the working day and that is where the energy savings actually come from, and daylight harvesting if the room has exterior glazing. If the space ties into an AV or room-booking system, involve that vendor before the lighting package is finalized.
