When it comes to getting the right lighting for your location, there are certain tools and equipment that Electricians, Electrical Contractors, Maintenance and Telecom Professionals need within their toolbox. For your convenience you can select from our electrical Hand Tools, Testers, Meters, Wire Pulling and other Electrical Installation Tools.
- Neon lamps indicate 7 common wiring conditions
- Wiring condition legend is listed on top and bottom of tester
- GFCI function tests GFCI and standard outlets wired in series with GFCI outlets (eg. multiple outlets in kitchen or bath)
- Compact ergonomic design with over-molded rubber grips for comfort
- Lifetime warranty
- Tests standard 3-wire and GFCI protected 120V outlets
Features include:
- Magnetic Bit Holder is 2-3/8 in long (extends to 4-3/4 in)
- Holds 1/4 in hex insert bits & accepts #10 & smaller screws
- Heat treated hardened steel bit
- Oversized magnet holds screw in correct starting position
- Outer sleeve slides over screwhead & helps to keep bit in the screwhead recess
- Magnetic Bit Holder Extends power tool reach by reaching limited access areas
- Order Qty of 1 = 1 Piece
- Check voltage and current, check charging cables, measure current draw, and test for proper wiring and polarity
- Includes pocket clip
- Durable, high-impact housing
- Easy to use and understand
- Made of tough ABS construction
- Replacement leads for Gardner Bender Meters
- 2-pack
- Easy to use flexible cords
Recessed Lighting Hole Saws - Carbide Grit 6-7/8 in."" features include:
- Carbide Grit Saw is the The perfect choice for quick and easy installation of recessed lighting
- Carbide grit cutting edge easily cuts holes in ceramic tile, fiberglass, marble, slate etc.
- Cuts through stucco, lath, and plaster
- Cuts 1-3/8 in deep - through two sheets of 5/8 in drywall in one pass to a depth of two inches
- Carbide Grit Saw Fits most major brands Halo, Capri, Marco, Juno, Prescolite, Progress, Lithonia, Lightolier, and others
- Strong, durable back plate
- Arbor not included (accepts Morris Arbor #13466, 13468, or 13470)
- Order Qty of 1 = 1 Piece
Below is more info on our Recessed Lighting Hole Saws - Carbide Grit 6-7/8 in."
- Kit includes most commonly used household testers
- Tests continuity, voltage and receptacles
- Simple to use
- Easy to understand
- Instructions included
- Designed for use in conduit with existing wires or cables
- Glides through 1/2" to 4" conduit
- High-strength nylon tape tsted at 300 lbs average tensile strength
- Tape diameter is 3/16"
- 6-inch spiral wound metal leader with pulling eyelet included (attached)
Features include:
- AC, W, VA, VAR, kWh and PE temperature measurement
- Max count 9999 and double scales analogue bar graph display
- 99 hours digital calculagraph for active energy measurement
- Single chip micro controller can deal with measurement, time, autorange switching control
- Measures: TRMS value, max value, min value
- Digital Clamp Current Meter Displays kWh measurement value and measuring time in active energy mode
- High function, low price and widely used power clamp meter
- Data hold
- Back Light
- Max Conductor Size: 1.97 in
- AC Current(A): 40/100/400/1000A ±2%
- AC Voltage(V): 100/300/600V ±1.2%
- Active Power(kW): 4/10/40/100/600 kW ±3%
- Apparent Power(kVA): 4/10/40/100/600 kVA ±3%
- Power Factor(PF): 0.3 cap to 0.3 ind ±.02
- Reactive Power(KVAR): 4/10/40/100/600 kVAR ±4%
- Active Eneregy(kWh): 10/100/1000/10000 kWh ±3%
- Frequency(Hz): 20Hz ~ 1000Hz ±0.5%
- Temperature(F;): -58;F~572;F ±5.5;F, -572~2372;F ±1%
- Display: 4 digit LCD
- Power Supply: 4 X 1.5V AA
- Operating Temperature: 32;F~104;F(0C ~ 40C)
- Cat III TRMS Autoranging Digital Power Clamp Meter Dimensions 11.8" X 4.1" X 2 in
- Weight 17.5oz.
- Order Qty of 1 = 1 Piece
Features include:
- 80-500 Volts AC/DC Circuit Tester
- Economy Twin Lead Tester
- Ideal for Testing Outlets, Switches and other Electrical Devices
- Blister Packed
- cULus Listed
- Order Qty of 1 = 1 Piece
Features include:
- Non-Contact Tester locates breaks along live, insulated wires and power cord
- Detects voltage at outlet, lighting fixture, circuit breaker, cable
- Convenient pen size fits into pocket or tool pouch
- Audible and visual indication
- Non Contact Tester has 3/16 in Detection Distance
- cULus Listed
- Order Qty of 1 = 1 Piece
- Patented, snap-in leads are spaced to fit a standard outlet for easy, "hands-free" testing
- No battery needed
- 10 foot drop and 250 pound crush rated
- Hi-Vis voltage indication
- Tests 80-250 Vac/Dc Voltage
- Indicator, Contoured Design, Hi Impact Abs Housing, Pocket Clip
- Enhanced True RMS circuitry
- 2000 Amp AC/DC
- Low pass AC filtering
- Includes convenient wrist strap
- Data hold capability to maintain reading on display
- Peak hold function to display in-rush current
- Operates from one 9 volt battery
- Detects unenergized, unshielded wires and cables install in the wall
- Distinguishes multiple wire combinations
- Operates from one AA battery
- Operates from one AA battery
Features include:
- GFCI & Receptacle Tester Instantly Displays Wiring Condition of Any Standard 3-Wire AC 110-120 Outlet or Ground Fault Circuit Interruptor
- Trips GFCI Receptacle to Indicate Operational status
- Neon Indicators Give Positive Indication of Current Status
- Compact Unit Simply Plugs into any Standard 3 Wire/Grounded Receptacle (110–125 Volt AC Circuits)
- Tests for 6 Circuit Conditions: Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse & Correct Wiring
- Blister Packed
- cULus Listed
- Order Qty of 1 = 1 Piece
Features include:
- Slow spiral
- High Grade Alloy Steel Shank for Strength and Durability
- Shallow Precision Machined Wide Oval Flutes Lift & Prevents Dust Packing
- Carbide Tip Resists Dulling
- Drills Masonry, Brick, Stone, Plaster, Slate, etc.
- Produces Clean, Accurately Sized Holes Fast
- Packed in Hanging Hard Plastic Tube
- Dimension Measurements = Inches
- Order Qty of 1 = 1 Piece
Features include:
- Tests & troubleshoots voice communication for open circuits, shorts, miswires, reversals, and split pairs
- SHIELD detection tests a cable’s shield integrity
- Easy to read fault display and high speed testing
- Debug mode for detailed fault identification results
- Networking Cable Tester has auto sleep mode and power off switch to decrease power consumption
- Battery low LED indicator
- Order Qty of 1 = 1 Piece
Features include:
- One of the most complete Tamperproof Screwdriver Security Bit Sets available anywhere with all of the most common & many of the rarest bits
- Includes magnetic holder & adaptors for power driving
- Includes the following bits
- PH0, PH1, PH2 x 5pcs, PH3
- SL 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mm
- PZ0, PZ1, PZ2 x 5pcs, PZ3
- Spanner 4, 6, 8, 10
- Tri-wing 1, 2, 3, 4
- 4 Square 0, S1, S2, S3
- M 5, 6, 8
- Torq-set 6, 8, 10
- Clutch 1, 2, 3
- 2.4 in.(60mm) L magnetic bit holder
- 1 in.(25mm) L Adaptor
- 2 in.(50mm) L Adaptor
- 1 in.(25mm) L Y-Bit
- 1 in.(25mm) L Bit Holding Socket
- T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-35 T-40 (Tamper Proof)
- T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45
- Hex. 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8mm
- Hex. 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32",3/16",7/32 in 1/4"
- Hex. 2, 2.5, 3, 4, 5, 6mm (Tamper Proof)
- Hex. 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (Tamper Proof)
Features include:
- 5-50 Volts AC/DC Voltage Tester
- Has Alligator Clip Test Leads
- Indicator Brightens as Voltage Increases
- Reinforced Casing with Pocket clip
- Blister Packed
- cETLus Listed
- Order Qty of 1 = 1 Piece
Features include:
- Test Voltage from 120V to 600V AC/DC
- Non-Contact Voltage Sensor from 90V to 1000V
- Test Continuity & Polarity
- Case serves as prod holder for one-hand operation
- Self-storing prods
- Solenoid Sensing indicated by LEDs & Vibration
- Ergonomic Soft PVC housing for comfort grip
- LED Spotlight Illuminates Work Area
- Battery not Included (AAA x 1)
- cETLus Listed
- Order Qty of 1 = 1 Piece
Features include:
- 90 to 300 Volts AC/DC Circuit Tester
- Bright LED AC/DC Indicator
- Insulated Casing with Pocket Clip
- Neon Indicator Glows when the Voltage is Present and Brightens as the Voltage Increases
- Blister Packed
- cULus Listed
- Order Qty of 1 = 1 Piece
Features include:
- Non-Contact Voltage Tester Means No Direct Electrical Contact & No Current Flow Needed
- Sound & Light Indication of Voltage
- Tests Electrical Lines, Cables, Sockets, Fuses, Switches & More
- Checks for Proper Ground Connection
- Unique Electronic Sensor Locates Breaks Along Live, Insulated Wires & Power Cords
- Distinguishes Polarity
- Detects Leaks in Underground Devices
- cETLus Listed
- Order Qty of 1 = 1 Piece
Features include:
- 110-220-277-460 Volts AC/DC 4 Way Circuit Tester
- 4-Way Circuit Tester Has Individual Indicator for each Voltage - Assures Reliability
- Bright Neon AC/DC Indicators
- Flexible Reinforced Leads
- Reinforced Casing with Convenient Pocket Clip
- Blister Packed
- cULus Listed
- Order Qty of 1 = 1 Piece
Features include:
- AC Voltage: 200/600V+/-1.2%
- DC Voltage: 200m/2/20/200V+/-0.5%, 600V+/-0.8%
- DC Current: 2m/20m/200mA+/-1%, 10A+/-3%
- Digital Multimeter Resistance: 200/2K/20K/200K/2M+/-0.8%
- Temperature: 1;F to 752;F (-17C to 400C) +/- 1%, 754;F to 1382;F (401C to 750; C) +/-2%
- Diode Test
- Audible Continuity Test
- Data Hold
- Overload Protection
- Power Source: (1) 9v Battery
- Fuse 200mA/250V
- IEC 61010-1 CAT II 600V
- Digital Multimeter Dimensions: 1.25 in X 2.72 in X 5.44 in
- Weight: 9 oz.
- Accessories: Rubber Holster, Test Leads, Battery & Instruction Manual
- Blister Packed
- cETLus Listed
- Order Qty of 1 = 1 Piece
Features include:
- AC Current: 200A+/-1.5%, 400A+/-2.0%
- AC Voltage: 600V+/-1.5%
- DC Voltage: 600V+/-1.0%
- 400A Digital Clamp Meter with Temperature Probe Resistance: 2000K+/-1.0%
- Temperature Range: -4;F to 500;F (-20C to 260C) +/-3%, F; & C; Selectable
- Easy Single Rotary Switch for any Function Selection
- Jaw Opening To 1.06 in
- Continuity Buzzer
- Data Hold for all Functions
- Overload Protection for all Ranges
- Diode Test: Tests Current 1.4mA Max, Test Voltage 2.8V Max
- Display: (3) 1/2 in. Digit LCD, Max Reading 1999
- Power Source: 9 Volt Battery
- 400A Digital Clamp Meter with Temperature Probe Dimensions: 8.07 in X 1.73 in X 1.57 in
- Weight: 7.0 Ounces
- Accessories: Carrying Case, Test Leads, Temperature Probe, Battery & Instruction Manual
- Order Qty of 1 = 1 Piece
20 Piece Titanium Coated Drill Bits Set - These High Speed Steel Drill Bits can cover any situation.
Features include:
- (2)1/16 in, 5/64 in, (2)3/32 in, (2)7/64 in, (2)1/8 in, 9/64 in, 5/32 in, 11/64 in, (2)3/16 in, 13/64 in, 7/32 in, 15/64 in, (2)1/4 in, 3/8 in
- Titanium Coated allows for Higher Drilling Temperatures & Increases Life of the Bit 500% Over Uncoated Drill Bits
- M2 Steel for Superior Metal, Wood & PVC Drilling
- 135 Degree Split Point for No Slip Starting
- Self Centering, Reduced Thrust & Easier Penetration
- Bits with Precision Ground Flutes
- Order Qty of 1 = 1 Set
Features include:
- Saves money on small cable pulling applications
- Thread, Measure and Pull with Single Product
- Imprinted with sequential footage markings
- Low Stretch Woven Polyester
- Fewer installation steps, significant material and labor savings
- Waterproof - Will not Rot or Mildew
- Tensile Strength: 2500 Lbs
- Length: 3000 Ft
- Order Qty of 1 = 1 Piece
- Ergonomic handle secures your grip at the strongest point and keeps the user's wrist in a normal, upright position to reduce strain and enhance productivity on the job
- Interior grip fits the user's palm, reducing the number of pressure points common on most fish tapes
- Weighs 5.2 lbs
- 12 Inch external ring diameter with 5.5 Inch internal ring diameter
Features include:
- A 12 Piece Set M42 Bi-Metal For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
- Set Contains Nine High Speed Hole Saws - 3/4 in. - 2-1/2 in., Two Arbors (13456 & 13466), & a 1/4 in Arbor Adapter (13434)
- Saw Diameters are: 3/4 in, 7/8 in, 1-1/8 in,1-3/8 in,1-1/2, 1-3/4 in, 2 in, 2-1/4 in and 2-1/2 in
- Bi-Metal Hole Saw Sets - All Components are Packed In a Sturdy Plastic Molded Carrying Case
- Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
- Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
- Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
- 1-3/4 in Cutting Depth
- 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
- Order Qty of 1 = 1 Set
Frequently Asked Questions
What are Electrical Tools?
Electrical tools are the tools that are used to work on electrical systems. These can include a wide range of tools such as wire and cable cutters, wire strippers, coaxial compression tools, telephony tools, wire cutter/strippers, cable tie tools, accessories and even more. Here are some example electrical hand tools:
What are the Various Types of Electrical Tools?
Electrical work requires tools. For most electrical projects, basic hand tools such as a hammer, tape measure, level, and screwdrivers are all that are necessary. Other electrical hand tools include:
- Pliers
- Screwdrivers and nut drivers
- Wire strippers Fishing tools
- Measuring devices
- Labeling machines
- Power drills and drivers, hammer/drills
- Power saws
- Meters
- Testers