Managing your electrical costs is an important part of your budget. Take advantage of the technology that Warehouse-Lighting.com carries to automate your lighting needs. We provide several sensors and timers with numerous mounting choices. Our options also include programmable and light sensitive sensors that can provide economic and environmentally friendly benefits.
51 products
Locking Type Photocontrol Standard 105-285V
- Brand: Morris
- 5-20 Second Time Delay
- UV Stabilized Polycarbonate Cover
- High Impact Polybutylene Terephthalate Base
- IP65 Protection While Installed
- 1/2” Light Sensor
- Temp Rate: -40ºF to 158ºF
- Relative Humidity: 96%
- Power Consumption:1.5 Watts Average
- Electrical Life: 5000 Cycles
- ETL Listed
ITEM: 39052
Select Product
Pencil Type Photo Sensor for Swivel Mount, 120 Volt
- Brand: Morris
- Voltage: 120
- Temp Rate: -40F to 158F
- Tungsten Rating: 1800W
- Ballast Rating: 1100 VA
- Frequesncy: 50-60 Hertz
- UL listed
ITEM: WS-115584
Select Product
High Bay Dimmable Motion Sensor, 120/277V
Clearance Item - All Sales Final
- Brand: WareLight
- Voltage: 120-277
- Coverage: 360°, up to 1900 sq. ft
- Controls incandescent, CFL and LED lighting
- Time delay adjustable (5 sec - 20 min)
- UL listed
- Warranty: 5 Year
ITEM: MC601V
Select Product
360° Line Voltage PIR Ceiling Occupancy Sensor
- Brand: Enerlites
- Voltage: 120-277
- Coverage: 360°, up to 1200 sq. ft
- Controls incandescent, CFL and LED lighting
- Time delay adjustable (5 sec - 30 min)
- UL listed
- 2 year warranty
ITEM: MPC-50V-W
Select Product
Humidity Sensor and Fan Control, Single Pole, 600W Incandescent, 150W LED/CFL, Ivory Color
- Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew
- Sensor uses microprocessor and digital sensing technology to continuously monitor and manage humidity levels in a room
- Built-in timer sets the minimum ON time for the ventilation fan. The sensor time settings can be custom set to 10, 20, 30 or 45 minute intervals. The sensor will continue to operate the fan for the minimum time set or until there is a reduction in room humidity level
- A sensitivity level adjustment allows users to adjust the sensor s sensitivity to ambient air to prevent false cycling
- Features an Air Cycle mode which automatically turns ON the ventilation fan for a set period of time and repeats the cycle hourly (eg. 20 minutes ON/40 minutes OFF each hour)
- Replaces a single pole switch for control of ventilation fan or a fan/light combination
- Fits in a standard wall box and requires a neutral for operation
- The device s built-in humidistat control meets CALGREEN requirements for Indoor Air Quality and Exhaust.
- Can be used to comply with the requirements of 2016 California Title 24, Part 6 Indoor Air Quality and Mechanical Ventilation
- Meets the requirements of ASHRAE 62.2
- Five-Year Limited warranty
ITEM: IPHS5-1LI
Select Product
Fixed Base Photocontrols (120V)
- Voltage 120
- Housing: UV stabilized impact resistant Polycarbonate
- Heavy-duty thermal bi-metal switch provides a 30+ second time delay
- Contact Position at Night is Normally Closed
- Sensor Type: CDS
- Single Pole, Single Throw Switch
- Power Consumption Below 1.5 Watts Average
ITEM: WS-115586
Select Product
UT-300 Ultrasonic Ceiling Sensor
- Depth: 1.0 in.
- Brand: Wattstopper
- Diameter: 4.5 in.
- Warranty: 5 Years
- Voltage: 24V
WattStopper?s UT-300 Ultrasonic Ceiling Sensors automatically turn lighting on and off based on occupancy. The sensors mount on the ceiling with a flat, unobtrusive appearance and provides 360? coverage.
ITEM: UT-305-01
Select Product
UW-100 Ultrasonic Wall Switch Occupancy Sensor, 120/277v
GENERAL INFO
- Typical Applications: Individual Restrooms, Two-Stall Restrooms, Utility/Storage Rooms
- Special Features: Detection Signature Processing eliminates false triggers
- IR Range On Axis: 300 SqFt
- LightOutput 1FCD: Automatic On/Off, Manual On/Off
- Load: 0-1200 W, 1/6 hp
- Response Time: 5 to 30 minutes
- Volts: 120/277VAC, 50/60 Hz
ITEM: UW-100-W
Select Product
CI-355 PIR Ceiling occupancy sensor 120/277/347V
- Depth: 1.45 in.
- Brand: Wattstopper
- Diameter: 4.5 in.
- Warranty: 5 Years
- Voltage: 120/277/347V
PIR ceiling occupancy sensor 120/277/347V
ITEM: CI-355
Select Product
WT-1100 - WT-2205 - WT-2200 - WT-2255 - WT- 2250 Ultrasonic Occupancy Sensor Isolated Relay
GENERAL INFO
- Typical Applications: Offices, Restrooms, Storage Areas
- Special Features: Solid State, Omni-directional transmission
- IR Range On Axis: 600-2200 SqFt
- LightOutput 1FCD: Automatic On/Off
- Load: 1 Amp @ 24 VDC/VA
ITEM: WT-1100
Select Product
UT-300 Ultrasonic Ceiling Sensor 24V
- Depth: 1.0 in.
- Brand: Wattstopper
- Diameter: 4.5 in.
- Warranty: 5 Years
- Voltage: 24V
WattStopper?s UT-300 Ultrasonic Ceiling Sensors automatically turn lighting on and off based on occupancy. The sensors mount on the ceiling with a flat, unobtrusive appearance and provides 360? coverage.
ITEM: UT-300-01
Select Product
AS-100 Push Button Automatic Control Switch
GENERAL INFO
- Typical Applications: Retrofit
- Type: Accessories
- Volts: 120/277VAC, 60 Hz
ITEM: AS-100-I
Select Product
CI-200 - CI-205 PIR Ceiling Occupancy Sensor 24V
GENERAL INFO
- Typical Applications: Open Office Spaces, Computer Rooms, Conference Rooms, Classrooms, Warehouses
- Special Features: Dual element, temperature compensated pyroelectric sensor, 360 degree coverage, built-in light level sensor, optional isolated relay.
TECHNICAL INFORMATION
- IR Range On Axis: 1200 SqFt
- LightOutput 1FCD: Automatic On/Off
- Load: 1 Amp @ 24VDC/VAC
- Response Time: 15 secs to 30 minutes
ITEM: CI-200
Select Product
TS-400 Wattstopper Digital Time Switch
GENERAL INFO
- Typical Applications: Laundry Room, Closet, Storage Room
- Special Features: Preset Countdown, Single pole
- Amps: 6 Amps
- Response Time: 5 mins -12 hr
- Volts: 120/277VAC; 50/60 Hz
ITEM: TS-400-B
Select Product
UW-200 Ultrasonic Wall Switch Occupancy Sensor, 2 Relays, 120/277v
GENERAL INFO
- Typical Applications: Individual Restrooms, Two-Stall Restrooms, Utility/Storage Rooms
- Special Features: Dual Relay
- IR Range On Axis: 300 SqFt
- LightOutput 1FCD: Automatic On/Off, Manual On/Off
- Load: 0-1200 W, 1/6 hp
- Response Time: 5 to 30 minutes
- Volts: 120/277VAC; 50/60 Hz
ITEM: UW-200-W
Select Product
W-500 - W-1000 Ultrasonic Ceiling Sensor
GENERAL INFO
- Typical Applications: Offices, Restrooms, Utility Areas, Warehouses, Conference Rooms
- Special Features: Solid State, Crystal-controlled
TECHNICAL INFORMATION
- LightOutput 1FCD: Automatic On/OFF
- Load: 1 Amp @ 24VDC/VAC
- Response Time: 15 seconds to 15 minutes
ITEM: W-500A
Select Product
WT-600 - WT-605 Ultrasonic Occupancy Sensor Isolated Relay, 24v
GENERAL INFO
- Typical Applications: Offices, Restrooms, Storage Areas
- Special Features: Solid State, Omni-directional transmission
- IR Range On Axis: 600-2200 SqFt
- LightOutput 1FCD: Automatic On/Off
- Load: 1 Amp @ 24 VDC/VAC
ITEM: WT-600
Select Product
PW-100-24 PIR Wall Switch Occupancy Sensor, 24v
GENERAL INFO
- Typical Applications: Small Office, Small Conference Room, Lunch/Break Rooms, Individual Restrooms
- Special Features: Low Voltage Input
- IR Range On Axis: 525 SqFt
- LightOutput 1FCD: Automatic On/Off, Manual On/Off
- Volts: 24VDC
ITEM: PW-100-24-I
Select Product
PW-100 PIR Wall Switch Occupancy Sensor, 120-277v
GENERAL INFO
- Typical Applications: Small Office, Small Conference Room, Lunch/Break Rooms, Individual Restrooms
- IR Range On Axis: 525 SqFt
- LightOutput 1FCD: Automatic On/Off, Manual On/Off
- Load: 0-1200 W, 1/6 hp
- Volts: 120/277VAC, 50/60Hz
ITEM: PW-100-W
Select Product
CB-100 PIR Ceiling Occupancy Sensor 24 VDC, low temp sensor
GENERAL INFO
- Typical Applications: Cold Storage Rooms, Freezers, Unconditioned Spaces
- Special Features: Dual element, temperature compensated pyroelectric sensor
- IR Range On Axis: 2000 SqFt
- LightOutput 1FCD: Automatic On/Off
- Load: 1 Amp @ 24VDC/VAC
- Response Time: 15 secs,5 minutesm 10 minutes
ITEM: CB-100
Select Product
Wall Mount Occupancy/Vacancy Sensors
Features include:
- The Passive Infrared (PIR) Technology senses occupancy by detecting the difference between heat emitted from the human body in motion and the background space.
- PIR wall switch works best in offices, copy rooms, storage closets, small conference rooms, and other common areas where there are high levels of occupant motion.
- PIR Wall Mount Occupancy/Vacancy Sensors turns lights On/Off automatically when people enter or leave a room
- Will work with Electronic, Fluorescent, Compact Fluorescent, Magnetic Low Voltage, Electronic Low Voltage and LED lighting
- Auto ON/OFF & Manual ON/Auto OFF
- Vacancy Setting allows for Manual ON/Auto OFF Function
- 30Ft Range When Mounted 4Ft Height
- Coverage: 180;, 720 sq ft
- Adjustable Light Level Sensitivity Settings - Ambient light setting automatically adjusts itself and controls when lights turn On/Off, depending on sufficient natural light present
- LED Indicator for visibility in darkened rooms
- Time Delay Off setting is adjustable from 5 Seconds to 30 minutes
- Removable Cover with mode settings and dip switch adjustments
- Decorative Wall plate Included
- Material: Polycarbonate
- 60Hz
- Neutral Required
- Conforms to California Title 24 Energy Code
- cULus Listed
- Order Qty of 1 = 1 Piece
ITEM: 80520
Select Product
DW-100-24 Dual Tech, Wall Switch Occupancy Sensor, 24v
GENERAL INFO
- Typical Applications: Small/Executive Offices, Small/Medium Conference Rooms, Lunch/Break Rooms
- Special Features: Low Voltage Input
- IR Range On Axis: 525 SqFt
- LightOutput 1FCD: Automatic On/Off, Manual On/Off
- Response Time: 5 to 30 minutes
- Volts: 18-24VDC, 24VAC
ITEM: DW-100-24-W
Select Product
Photocontrol Swivel Bases (208-277V)
- Voltage 208-277
- Usually Ships Same Day
- Housing: UV stabilized impact resistant Polycarbonate
- Swivel Base
- Heavy-duty thermal bi-metal switch provides a 30+ second time delay
- Contact Position at Night is Normally Closed
- Sensor Type: CDS
- Single Pole, Single Throw Switch
- Power Consumption Below 1.5 Watts Average
ITEM: WS-115592
Select Product
Photocontrol Swivel Bases (120V)
- Voltage 120
- Usually Ships Same Day
- Housing: UV stabilized impact resistant Polycarbonate
- Swivel Base
- Heavy-duty thermal bi-metal switch provides a 30+ second time delay
- Contact Position at Night is Normally Closed
- Sensor Type: CDS
- Single Pole, Single Throw Switch
- Power Consumption Below 1.5 Watts Average
ITEM: WS-115591
Select Product
Fixed Base Photocontrols (208-277V)
- Voltage 208-277
- Housing: UV stabilized impact resistant Polycarbonate
- Heavy-duty thermal bi-metal switch provides a 30+ second time delay
- Contact Position at Night is Normally Closed
- Sensor Type: CDS
- Single Pole, Single Throw Switch
- Power Consumption Below 1.5 Watts Average
ITEM: WS-115587
Select Product
With so many options for sensors and lighting controls, we make sure that you can customize this important aspect to your space. Various mounting applications are available to accommodate your specific needs, including several options that don't require twist connectors for fast installation. We also offer various programmable sensors that can be preset with a time delay or other programmed lighting designs. This helps to keep only the lights that you want on at the times when you need them. Plus, our sensors and lighting controls are durable and resistant to tampering, making it easy for you to keep control over your light solutions.
If you're looking for ways to cut down on your energy costs and make your home or business safer, get these sensors and lighting controls from Warehouse-Lighting.com today. Our selection gives you plenty of options to find the best sensor for your space. Plus, you can purchase multiple lighting controls to take advantage of our discounts on bulk orders. Contact us with any questions you have, and we'll be happy to help you find the right lighting solutions for your needs
