Electrical Lighting Installation Supplies & Products

• For use with MAJOR APPLIANCES, MOTORS and POWER TOOLS, U-Ground NEMA 5-15
• APPLICATION: SJTW: Hard SERVICEB cord, THERMOPLASTIC/Vinyl constructed JACKET, 300 Volt, WEATHER RESISTANT for OUTDOOR USE
• IDEAL FOR appliances, motors and power tools
• APPLICATION: 9 Foot 14/3 cord with U Ground NEMA 5-15 plug and pigtail end
• APPLICATION: Rated For: 15 Amp, 125V, 1875 Watts max applications
• Standard carton of 25 (19 lbs)

Surface Mount Kit for Gen 2 and Gen 3 Condor Fixtures

• Linking Bracket for GC-ME-LED
• Allows fixtures to be mechanically linked together.

• Brand: Cable Masters
• 16 Gauge
• Wire colors: Black, White, Green
• Strain Relief on one end
• 6 foot long

• Brand: Cable Grippers
• 5 ft Long Aircraft Cable
• 2 Lp Grippers 

General Purpose Vinyl Electrical Tape features include:

• Color coded electrical tape is 3/4” X 60 Ft X 7 Mil
• Use for Protective Jacketing and Bundling
• High dielectric strength, high adhesion and shear
• Flame Retardant and Weather Resistant
• Resistant to acids, alkalis, chemicals, oils, moisture, sunlight and corrosion
• Rated 600V
• Lead Free
• UL 510 and CSA 22.2 Listed
• Order Qty of 1 = 1 Piece

Features include:

• Adhesive cloth construction offering good mechanical protection against abrasion and penetration of cable, splices and wire
• Used as temporary & binding friction tape
• Adhesive compound on both sides
• Overwrap electrical connections
• 1000V/mil minimum dielectric strength
• Cloth adhesive friction tape meets ASTM-D69, .014 in thickness
• Order Qty of 1 = 1 Piece

• Usually Ships Next Day
• Quick Connect Fixture End

• Rated for: 15 Amp, 125-Volt, 1,875-Watt max applications
• 3 ft. length
• U-ground NEMA 5-15 plug and pigtail end
• Black, SJTW PVC jacket
• ETL approved

Features include:

• Drill 1/4 in. Hole on Panel, Install Mount, then Insert Tie Into Mount for bundling cables
• Push Tie Mounts are made from UL approved Nylon 6/6, 94V-2
• Accepts up to 120lbs cable tie
• Dimension Measurements = Inches
• Order Qty of 100 = 1 Bag of 100

Features include:

• Manufactured from High Strength Brass
• Electro-Tin Plated for corrosion resistance
• Color Coded insulation for easy identification
• Easy Entry Expanded Nylon Insulation eliminates strand Hang Up in, increasing crimping rates and provides mechanical strain relief
• Maximum Electric Current: 22 AWG - 3 Amp, 20 AWG - 4 Amp, 18 AWG - 7 Amp, 16 AWG - 10 Amp, 14 AWG - 15 Amp, 12 AWG - 20 Amp, 10 AWG - 24 Amp
• 221;F(105C) 300 Volts Max
• cULus Listed
• Dimension Measurements = Inches
• Order Qty of 100 = 1 Bag of 100

Features include:

• Single-point wire holders are strong and compact
• Made with Porcelain and Galvanized Steel
• Solid Rivet Through Head
• Bolt and Nut type Wire Holder
• Order Qty of 1 = 1 Piece

Premium 5 Mil Wire Harness Tape Features include:

• Used for Protecting, Insulating and Bunlding Electrical Wire Harnesses
• Premium 5 Mil Wire Harness Tape comes in 3/4 in. Width
• Highly Elastic Polymeric Backing - Excellent Elongation and Conformability
• High dielectric strength, high adhesion and shear
• Resistant to acids, alkalis, chemicals, oils, moisture and corrosion
• Lead Free
• Order Qty of 1 = 1 Piece

Features include:

• Heavy duty porcelain head wire holder has reinforced saddle
• Made with Porcelain and Galvanized Steel
• Single point wire holders are strong and compact
• Solid Rivet through head
• Quick and easy installation for most projects
• For use with wooden constrcution
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

• Usually Ships 7-10 Business Days

• Brand: WareLight
• Surface Mount Kit for original generation Condor Fixtures measuring 45.9" x 12.6" ONLY

Features include:

• Snap bushings eliminate sharp edges and insulate your raw-edged holes in metal chassis
• Easily locks into hole firmly with fingertip pressure
• Snap bushings protect electrical cables, ropes, utility lines passing through metal chassis
• 1/8 in maximum steel thickness
• Made from UL approved Nylon 6/6, 94V-2
• UL Recognized
• Dimension Measurements = Inches
• Order Qty of 10 = 1 Bag of 10

Copper C-Taps Heavy Wall 4/0 - 2/0 features include:

• Copper C Taps are UL 467 Listed for Direct Burial & Grounding/Bonding Applications
• Applications include Copper To Copper Splice/Tap or Stub/Pigtail Connections and Grounding
• Allows for 2 Continuous Parallel Conductors
• Heavy Wall High Strength Electrolytic Copper
• Compact Size
• Range Taking
• 600 volt
• UL/CSA Listed
• C Tap dimension measurements = Inches
• Order Qty of 1 = 1 Piece

Below is more info on our Copper C Taps Heavy Wall 4/0 - 2/0

Features include:

• Multi-Stud Ring terminals are Vinyl Insulated & accommodate multiple stud sizes
• Color Coded insulation for easy identification
• Manufactured from High Strength Copper Alloy
• Electro-Tin Plated for corrosion resistance
• Easy Entry Expanded Insulation eliminates strand Hang Up in, increasing crimping rates and provides mechanical strain relief
• Wire range stamped on the surface for easy interpretation
• Terminal Barrel has Butted Seam
• Serrated Barrel provides excellent electrical contact & resistance to pull-out forces
• 167;F (75C) 600 Volts Max
• Maximum Electric Current: 22 AWG - 9 Amp, 20 AWG - 12 Amp, 18 AWG - 17 Amp, 16 AWG - 18 Amp, 14 AWG - 30 Amp, 12 AWG - 35 Amp, 10 AWG - 50 Amp
• cULus Listed
• Order Qty of 100 = 1 Bag of 100

Features include:

• Male Disconnects are Vinyl Insulated
• Color Coded insulation for easy identification
• Manufactured from High Strength Brass
• Electro-Tin Plated for corrosion resistance
• Easy Entry Expanded Insulation Eliminates strand Hang Up in, increasing crimping rates and provides mechanical strain relief
• Wire range stamped on the surface for easy interpretation
• Terminal Barrel has Butted Seam
• Serrated Barrel provides excellent electrical contact & resistance to pull-out forces
• 167;F (75C) 300 Volts Max
• Maximum Electric Current: 22 AWG - 3 Amp, 20 AWG - 4 Amp, 18 AWG - 7 Amp, 16 AWG - 10 Amp, 14 AWG - 15 Amp, 12 AWG - 20 Amp, 10 AWG - 24 Amp
• cULus Listed
• Dimension Measurements = Inches
• Order Qty of 100 = 1 Bag of 100

• For use with MAJOR APPLIANCES, MOTORS and POWER TOOLS, U-Ground NEMA 5-15
• APPLICATION: SJTW: Hard SERVICE cord, THERMOPLASTIC/Vinyl constructed JACKET, 300 Volt, WEATHER RESISTANT for OUTDOOR USE
• IDEAL FOR appliances, motors and power tools
• APPLICATION: 6 Foot 16/3 cord with U Ground NEMA 5-15 plug and pigtail end
• APPLICATION: Rated For: 13 Amp, 125V, 1625 Watts max applications
• Standard carton of 25 (13 lbs)

Aluminum H Tap Line Tap - Our Aluminum H Tap Compression Line Tap Splice Connector is used in >;

Aluminum H Tap Line Tap features include:

• Wide range, universal and reversible figure H-shaped line tap 6061-T6 Aluminum connector
• Conductors are separated by the A & B grooves
• Bendable taps secure both run and tap conductors freeing the lineman’s hands to work with the installation tool
• Massive Aluminum design minimizes corrosion due to galvanic erosion
• Prefilled with Anti-Oxidant joint compound
• Formable Ribs Provide Broad Contact Area
• H Tap Line tap for Copper, Aluminum, ACSR and Compact Conductors
• Order Qty of 1 = 1 Piece

Below is more info on our Aluminum H Tap Line Tap Compression Connector Tap

Features include:

• Chair Adapter (2 Male Tabs) Material: Brass
• 24 Amp 600V
• cULus Listed
• Order Qty of 100 = 1 Bag of 100

Copper C Taps Medium Wall 500 - #2- Copper C-Taps are used for Splice/Tap & Grounding Applications.

Copper C-Taps Medium Wall 500 - #2 features include:

• Medium Wall Design with Raised Seperating Barrier for Larger Gauge Wire Applications
• Copper C Taps are UL 467 Listed for Direct Burial & Grounding/Bonding Applications
• Applications include Copper To Copper Splice/Tap or Stub/Pigtail Connections and Grounding
• Allows for 2 Continuous Parallel Conductors
• High Strength Electrolytic Copper
• Compact Size
• Range Taking
• 600 volt
• UL/CSA Listed
• C Tap dimension measurements = Inches
• Order Qty of 1 = 1 Piece

Below is more info on our Copper C Taps Medium Wall 500 - #2

Terminal Blocks 30 Amp Header Card 2 Pack features include:

• Touchproof recessed screws and tubular contacts on these electrical terminal blocks provide added safety and helps prevent short circuits
• Tubular contacts connect stripped, un-terminated solid or stranded wire directly to each contact
• Integrated Stainless Steel spring wire protectors prevent twisting and breakage of stranded wire during termination
• Modular 12-circuit design can be cut into smaller sections or stacked end-to-end
• Dead front design to prevent shorts
• Rugged Nylon 66 housing, UL 94V2
• Operating temperature rated at 230;F(110C)
• Brass Metal Alloy, Nickel Plated Terminal Insert
• Zinc Plated, yellow Chromated screws
• Can be used for AC & DC applications
• cURus/CSA Listed
• Dimension Measurements = Inches
• (Header Card Pack) Order Qty of 1 = 1 Header Card Pack of 2

Below is more info on our Terminal Blocks 30 Amp Header Card 2 Pack

Features include:

• Ground Connectors are Color Coded Green for quick identification as Grounding Connector
• Specifically designed for Making Positive Ground Connections and Bonding Non-Metallic Sheathed Cable
• Live Action Square Spring Design draws wires deep into spring for safe, tight grip and making a strong connection
• Built-in Swept-Back Wing Design enables users to tighten connectors easily without tools
• cULus Listed
• (Bulk Bag 500 pack) Order Qty of 500 = 1 Bulk Bag of 500

Terminal Blocks 35 Amp Header Card 2 Pack features include:

• Touchproof recessed screws and tubular contacts on these electrical terminal blocks provide added safety and helps prevent short circuits
• Tubular contacts connect stripped, un-terminated solid or stranded wire directly to each contact
• Integrated Stainless Steel spring wire protectors prevent twisting and breakage of stranded wire during termination
• Modular 12-circuit design can be cut into smaller sections or stacked end-to-end
• Dead front design to prevent shorts
• Rugged Nylon 66 housing, UL 94V2
• Operating temperature rated at 230;F(110C)
• Brass Metal Alloy, Nickel Plated Terminal Insert
• Zinc Plated, yellow Chromated screws
• Can be used for AC & DC applications
• cURus/CSA Listed
• Dimension Measurements = Inches
• (Header Card Pack) Order Qty of 1 = 1 Header Card Pack of 2

Below is more info on our Terminal Blocks 35 Amp Header Card 2 Pack

Features include:

• Flanged Fork/Spade Terminals are Nylon Insulated
• Color Coded insulation for easy identification
• Manufactured from High Strength Electrolytic Copper Alloy
• Electro-Tin Plated for corrosion resistance
• Easy Entry Expanded Insulation eliminates strand Hang Up in, increasing crimping rates and provides mechanical strain relief
• Wire range stamped on the surface for easy interpretation
• Terminal Barrel has Brazed Seam
• Serrated Barrel provides excellent electrical contact & resistance to pull-out forces
• Flanged Configuration of Tang ensures a Positive Lock to terminal base increasing pull-out force resistance
• 221;F (105C) 600 Volts Max
• Maximum Electric Current: 22 AWG - 9 Amp, 20 AWG - 12 Amp, 18 AWG - 17 Amp, 16 AWG - 18 Amp, 14 AWG - 30 Amp, 12 AWG - 35 Amp, 10 AWG - 50 Amp
• cULus Listed
• Order Qty of 100 = 1 Bag of 100