Drill Bits

Features include:

• Magnetic Bit Holder is 2-3/8 in long (extends to 4-3/4 in)
• Holds 1/4 in hex insert bits & accepts #10 & smaller screws
• Heat treated hardened steel bit
• Oversized magnet holds screw in correct starting position
• Outer sleeve slides over screwhead & helps to keep bit in the screwhead recess
• Magnetic Bit Holder Extends power tool reach by reaching limited access areas
• Order Qty of 1 = 1 Piece

20 Piece Titanium Coated Drill Bits Set - These High Speed Steel Drill Bits can cover any situation.

Features include:

• (2)1/16 in, 5/64 in, (2)3/32 in, (2)7/64 in, (2)1/8 in, 9/64 in, 5/32 in, 11/64 in, (2)3/16 in, 13/64 in, 7/32 in, 15/64 in, (2)1/4 in, 3/8 in
• Titanium Coated allows for Higher Drilling Temperatures & Increases Life of the Bit 500% Over Uncoated Drill Bits
• M2 Steel for Superior Metal, Wood & PVC Drilling
• 135 Degree Split Point for No Slip Starting
• Self Centering, Reduced Thrust & Easier Penetration
• Bits with Precision Ground Flutes
• Order Qty of 1 = 1 Set

Features include:

• Slow spiral
• High Grade Alloy Steel Shank for Strength and Durability
• Shallow Precision Machined Wide Oval Flutes Lift & Prevents Dust Packing
• Carbide Tip Resists Dulling
• Drills Masonry, Brick, Stone, Plaster, Slate, etc.
• Produces Clean, Accurately Sized Holes Fast
• Packed in Hanging Hard Plastic Tube
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Features include:

• Slow spiral
• High Grade Alloy Steel Shank for Strength and Durability
• Shallow Precision Machined Wide Oval Flutes Lift & Prevents Dust Packing
• Carbide Tip Resists Dulling
• Drills Masonry, Brick, Stone, Plaster, Slate, etc.
• Produces Clean, Accurately Sized Holes Fast
• Packed in Hanging Hard Plastic Tube
• Dimension Measurements = Inches
• Order Qty of 1 = 1 Piece

Features include:

• One of the most complete Tamperproof Screwdriver Security Bit Sets available anywhere with all of the most common & many of the rarest bits
• Includes magnetic holder & adaptors for power driving
• Includes the following bits
  • PH0, PH1, PH2 x 5pcs, PH3
  • SL 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mm
  • PZ0, PZ1, PZ2 x 5pcs, PZ3
  • Spanner 4, 6, 8, 10
  • Tri-wing 1, 2, 3, 4
  • 4 Square 0, S1, S2, S3
  • M 5, 6, 8
  • Torq-set 6, 8, 10
  • Clutch 1, 2, 3
  • 2.4 in.(60mm) L magnetic bit holder
  • 1 in.(25mm) L Adaptor
  • 2 in.(50mm) L Adaptor
  • 1 in.(25mm) L Y-Bit
  • 1 in.(25mm) L Bit Holding Socket
  • T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-35 T-40 (Tamper Proof)
  • T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45
  • Hex. 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8mm
  • Hex. 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32",3/16",7/32 in 1/4"
  • Hex. 2, 2.5, 3, 4, 5, 6mm (Tamper Proof)
  • Hex. 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (Tamper Proof)