Drill Bits and Saw Blades

The right drill bits can help you make holes for rigging chains and fixtures, as well as a host of other tasks to get various lighting jobs done. We also offer blades which have a range of uses in terms of rigging electrical systems, light fixtures, and more.

94 products
1/4 in. Magnetic Bit Holder/Extension Screwdriver Guide

1/4 in. Magnetic Bit Holder/Extension Screwdriver Guide

Features include:

  • Magnetic Bit Holder is 2-3/8 in long (extends to 4-3/4 in)
  • Holds 1/4 in hex insert bits & accepts #10 & smaller screws
  • Heat treated hardened steel bit
  • Oversized magnet holds screw in correct starting position
  • Outer sleeve slides over screwhead & helps to keep bit in the screwhead recess
  • Magnetic Bit Holder Extends power tool reach by reaching limited access areas
  • Order Qty of 1 = 1 Piece

ITEM: 13900

As low as $3.36
Select Product
100 Piece Security Bit Set

100 Piece Security Bit Set

Features include:

  • One of the most complete Tamperproof Screwdriver Security Bit Sets available anywhere with all of the most common & many of the rarest bits
  • Includes magnetic holder & adaptors for power driving
  • Includes the following bits
    • PH0, PH1, PH2 x 5pcs, PH3
    • SL 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mm
    • PZ0, PZ1, PZ2 x 5pcs, PZ3
    • Spanner 4, 6, 8, 10
    • Tri-wing 1, 2, 3, 4
    • 4 Square 0, S1, S2, S3
    • M 5, 6, 8
    • Torq-set 6, 8, 10
    • Clutch 1, 2, 3
    • 2.4 in.(60mm) L magnetic bit holder
    • 1 in.(25mm) L Adaptor
    • 2 in.(50mm) L Adaptor
    • 1 in.(25mm) L Y-Bit
    • 1 in.(25mm) L Bit Holding Socket
    • T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-35 T-40 (Tamper Proof)
    • T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45
    • Hex. 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8mm
    • Hex. 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32",3/16",7/32 in 1/4"
    • Hex. 2, 2.5, 3, 4, 5, 6mm (Tamper Proof)
    • Hex. 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (Tamper Proof)

ITEM: 13950

As low as $64.05
Select Product
12 Piece Hole Saw Set

12 Piece Hole Saw Set

12 Piece Hole Saw Set - 3/4 in. - 2-1/2 in. Hole Size Our Bi-Metal Hole Saw Sets give you great variety for less.>;

Features include:

  • A 12 Piece Set M42 Bi-Metal For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Set Contains Nine High Speed Hole Saws - 3/4 in. - 2-1/2 in., Two Arbors (13456 & 13466), & a 1/4 in Arbor Adapter (13434)
  • Saw Diameters are: 3/4 in, 7/8 in, 1-1/8 in,1-3/8 in,1-1/2, 1-3/4 in, 2 in, 2-1/4 in and 2-1/2 in
  • Bi-Metal Hole Saw Sets - All Components are Packed In a Sturdy Plastic Molded Carrying Case
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Order Qty of 1 = 1 Set

ITEM: 13422

As low as $98.64
Select Product
20 Piece Titanium Coated Drill Bits Set

20 Piece Titanium Coated Drill Bits Set

20 Piece Titanium Coated Drill Bits Set - These High Speed Steel Drill Bits can cover any situation.

Features include:

  • (2)1/16 in, 5/64 in, (2)3/32 in, (2)7/64 in, (2)1/8 in, 9/64 in, 5/32 in, 11/64 in, (2)3/16 in, 13/64 in, 7/32 in, 15/64 in, (2)1/4 in, 3/8 in
  • Titanium Coated allows for Higher Drilling Temperatures & Increases Life of the Bit 500% Over Uncoated Drill Bits
  • M2 Steel for Superior Metal, Wood & PVC Drilling
  • 135 Degree Split Point for No Slip Starting
  • Self Centering, Reduced Thrust & Easier Penetration
  • Bits with Precision Ground Flutes
  • Order Qty of 1 = 1 Set

ITEM: 13592

As low as $28.53
Select Product
Auger Bit Extension 7/16 in. x 12 in.

Auger Bit Extension 7/16 in. x 12 in.

Features include:

  • 12 in Extension Fits 7/16 in Hex Shank
  • Auger Bit Extension Adds 12 in to your bit
  • Heavy-duty set screw type
  • Auger Bit Extension Has 2 Set Screws
  • Hex Wrench included
  • Order Qty of 1 = 1 Piece

ITEM: 13798

As low as $19.48
Select Product
Bi-Metal Hole Saws

Bi-Metal Hole Saws

Features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

ITEM: 13312

As low as $7.33
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1 in.

Bi-Metal Hole Saws - 4/6 Pitch 1 in.

Bi-Metal Hole Saws 1 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1 in.

ITEM: 13326

As low as $7.29
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-1/16 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-1/16 in.

Bi-Metal Hole Saws 1-1/16 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-1/16 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-1/16 in.

ITEM: 13328

As low as $7.29
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-1/2 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-1/2 in.

Bi-Metal Hole Saws 1-1/2 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-1/2 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-1/2 in.

ITEM: 13342

As low as $7.84
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-1/4 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-1/4 in.

Bi-Metal Hole Saws 1-1/4 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-1/4 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-1/4 in.

ITEM: 13334

As low as $7.29
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-1/8 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-1/8 in.

Bi-Metal Hole Saws 1-1/8 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-1/8 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-1/8 in.

ITEM: 13330

As low as $7.29
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-11/16 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-11/16 in.

Bi-Metal Hole Saws 1-11/16 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-11/16 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-11/16 in.

ITEM: 13348

As low as $7.84
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-13/16 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-13/16 in.

Bi-Metal Hole Saws 1-13/16 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-13/16 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-13/16 in.

ITEM: 13352

As low as $11.25
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-3/16 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-3/16 in.

Bi-Metal Hole Saws 1-3/16 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-3/16 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-3/16 in.

ITEM: 13332

As low as $7.29
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-3/4 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-3/4 in.

Bi-Metal Hole Saws 1-3/4 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-3/4 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-3/4 in.

ITEM: 13350

As low as $9.98
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-3/8 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-3/8 in.

Bi-Metal Hole Saws 1-3/8 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-3/8 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-3/8 in.

ITEM: 13338

As low as $7.84
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-5/16 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-5/16 in.

Bi-Metal Hole Saws 1-5/16 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-5/16 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-5/16 in.

ITEM: 13336

As low as $7.29
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-5/8 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-5/8 in.

Bi-Metal Hole Saws 1-5/8 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-5/8 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-5/8 in.

ITEM: 13346

As low as $6.79
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-7/16 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-7/16 in.

Bi-Metal Hole Saws 1-7/16 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-7/16 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-7/16 in.

ITEM: 13340

As low as $8.84
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-7/8 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-7/8 in.

Bi-Metal Hole Saws 1-7/8 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-7/8 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-7/8 in.

ITEM: 13354

As low as $9.98
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 1-9/16 in.

Bi-Metal Hole Saws - 4/6 Pitch 1-9/16 in.

Bi-Metal Hole Saws 1-9/16 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 1-9/16 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 1-9/16 in.

ITEM: 13344

As low as $7.84
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 11/16 in.

Bi-Metal Hole Saws - 4/6 Pitch 11/16 in.

Bi-Metal Hole Saws 11/16 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 11/16 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 11/16 in.

ITEM: 13316

As low as $6.49
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 15/16 in.

Bi-Metal Hole Saws - 4/6 Pitch 15/16 in.

Bi-Metal Hole Saws 15/16 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 15/16 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 15/16 in.

ITEM: 13324

As low as $7.33
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 2 7/8 in.

Bi-Metal Hole Saws - 4/6 Pitch 2 7/8 in.

Bi-Metal Hole Saws 2 7/8 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 2 7/8 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 2 7/8 in.

ITEM: 13376

As low as $16.85
Select Product
Bi-Metal Hole Saws - 4/6 Pitch 2 in.

Bi-Metal Hole Saws - 4/6 Pitch 2 in.

Bi-Metal Hole Saws 2 in. - A great Bi-Metal Hole Saw for any situation.>;

Bi-Metal Hole Saws - 4/6 Pitch 2 in. features include:

  • M42 Bi-Metal Hole Saw For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel
  • Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws
  • Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts
  • Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel
  • 1-3/4 in Cutting Depth
  • 3/16 in Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating
  • Packed in Individual Color Boxes
  • Dimension Measurements = Inches & (millimeters)
  • Order Qty of 1 = 1 Piece

Below is more info on our Bi-Metal Hole Saws - 4/6 Pitch 2 in.

ITEM: 13356

As low as $11.15
Select Product