Bar and Restaurant LED Lighting Page 2

Dimming Capability in Dining Spaces

Full-service dining rooms almost universally need dimming. The ability to pull light levels down between lunch, dinner, and private event scenarios is something ownership expects, and the electrical plan needs to account for it from the start. Most restaurant LED lighting fixtures support dimming, but driver protocol matters: 0-10V, TRIAC, and DALI all require compatible control systems, and not every dimmer works with every LED driver. Confirm the dimming protocol on the fixture spec sheet and match it to the control system before the order goes in.

NSF Listings in Commercial Kitchens

Any fixture installed above an open food preparation or storage area in a commercial kitchen is subject to NSF/ANSI Standard 2, which requires NSF listing to prevent contamination risk. This is a health code requirement that comes up during health department inspections. Our restaurant lighting collection includes a wide selection of NSF-listed fixtures, clearly identified in product specifications.

Color Temperature by Zone

Warm CCTs in the 2700K to 3000K range are the standard for dining rooms and bar areas, where the goal is an inviting, flattering atmosphere that makes food and guests look good. Commercial kitchen and prep areas typically call for 4000K to 5000K, where neutral-to-cool output makes it easier to evaluate food, read labels, and stay sharp through a service shift. Where the kitchen is partially visible from the dining room, a selectable CCT fixture at the transition manages the visual boundary without requiring a fixture swap down the road.

How many foot-candles does a restaurant typically need?

It varies considerably by zone. IES guidelines suggest 5 to 10 foot-candles for dining room ambient levels in a full-service restaurant, with higher targets at the host stand and service stations. Commercial kitchen work surfaces typically need 30 to 50 foot-candles, with inspection and plating areas running higher. Bar surfaces and POS stations generally need 30 to 50 foot-candles for functional task work. Warehouse Lighting's free lighting layout service can help you plot a strategy.

What type of fixtures work best for outdoor restaurant seating?

Outdoor dining areas exposed to rain or direct water contact require wet location-rated fixtures. Covered patios where fixtures are shielded from direct weather still need damp location ratings at a minimum. Gooseneck and barn lights are a common choice for covered patio perimeters and exterior facades. Wet-rated wall packs and area lights handle open patio and parking perimeter applications.

How does bar lighting differ from the dining room spec?

Bar areas layer multiple lighting strategies that dining rooms typically don't. Backlighting shelves and back-bar displays often call for RGB or tunable white linear fixtures to highlight products and create visual interest. Task lighting directly over the bar surface needs to be bright enough for accurate work with garnishes and pours, which is a meaningfully different target than dining room ambient levels. Accent fixtures on independent dimmers give the bar its own adjustable atmosphere separate from the dining room scheme. The restaurant lighting collection at Warehouse-Lighting includes RGB and tunable options suited to bar applications.

Are there energy rebates available for LED restaurant lighting upgrades?

Potentially. DLC and DLC Premium-listed fixtures are commonly required for utility rebate eligibility, and this collection includes DLC-listed and DLC Premium-listed products. The Energy Star-rated fixtures in the collection may also qualify depending on the utility program. We provide Energy Rebate Assistance guidance on qualifying programs, and it's worth checking before you finalize the spec.

Can restaurant kitchen fixtures handle regular washdowns?

For areas subject to high-pressure washdowns, IP66 or higher is the standard recommendation. IP65 is splash-resistant but not rated for sustained water jets, so it works for standard kitchen cleaning protocols but not direct hose contact. Where pressure washing is routine, IP66 or IP67 fixtures are the more appropriate choice.