LED Track Lighting Fixtures & Systems

Point Light Exactly Where It Belongs

Track lighting earns its keep in rooms that get rearranged. Every head adjusts, and beam spreads run from a tight 15-degree spot up to a wide flood, so you can drop a contained pool of light on a single product or graze an entire wall evenly. When the display moves, you slide the head to a new spot on the track instead of opening up the ceiling.

Selectable Output and Color in One Head

Many heads are wattage- and CCT-selectable, spanning 2700K warm white up to 5000K daylight on the same fixture. A store can run a warmer tone over a merchandise display and a cooler one near checkout without stocking separate parts. Going with LED track lighting also drops the energy load to a fraction of the halogen heads they replace, and most carry a high 90-plus CRI, so colors and finishes read true.

Finishes and Hardware That Suit the Room

Heads come in black or white, so they can vanish into the ceiling or lean into the exposed-structure look common in modern retail and dining rooms. That's where industrial track lighting and polished showroom lighting end up using the same hardware. These are 120V line-voltage heads built for standard single-circuit track, and the collection includes the connectors and rails you need to build straight runs or turns. Just match the head to your track type, since H-type and Juno-style systems are not interchangeable.

Dimming and Smart Control

Most heads dim on a standard Triac or ELV dimmer, some all the way down to 10 percent, which is how you set the mood in a restaurant or gallery after hours. A few can also connect to a phone app or a smart-home system, so you can turn them on and off, dim them, or have them adjust on a set schedule without using the wall switch.

Will these heads fit the track I already have?

Not always, so check the track type before you order. Many heads in this collection use H-type track, one of the common single-circuit standards. Others, like the Juno-style (J-type) heads, use a different contact layout and will not seat in an H-type rail. If you are adding to an existing run, match the head to the track you have or plan on swapping the rail. Send us a photo of the track if you're not sure, and we can tell you what fits.

How many track heads can I run on one circuit?

More than you might expect, because these heads pull so little power. A single head here draws roughly 10 to 40 watts, so a standard 120V, 20-amp circuit has room for a long run before you get near its safe load. Add up the wattage of every head you plan to hang and keep the total under 80 percent of the circuit rating, which is the usual code allowance. Confirm that number with your electrician against local code.

What beam angle should I pick?

It comes down to how tight you want the light. A narrow 15 to 20 degree spot puts a bright, contained pool on one object, such as a product or a piece of art. Wider angles up toward 55 degrees spread the light for general coverage or an even wall wash. Several heads here have an adjustable beam, so you can fine-tune the spread after the fixture is mounted instead of guessing at spec time.

Can track lighting be a room's main light, or only accent?

Both, depending on the space. On a smaller retail floor or in a gallery, enough heads on a run can handle the general lighting and the accent work at the same time. In a larger or taller room, track is better used to layer highlights on top of a primary ceiling system, since each head throws a focused, moderate amount of light rather than broad flood coverage. Match it to the ceiling height and how bright the space needs to be.