Waterproof wire connectors are typically filled with moisture resistant materials such as silicone, grease or petroleum to prevent corrosion of the exposed wire ends. These wire connectors protect your work that is exposed to the moisture or the elements. The waterproof electrical connectors are a must for landscape lighting and some irrigation equipment. You will have peace of mind knowing that these products are made with the best grade of protective waterproof materials. Check the voltage rating of these waterproof wire connectors before you buy, and also, be sure to get the right quantity to cover your needs.

King Innovation 10975 Dryconn Direct Burry Wire Connector, Dark Blue; 75/Box
- For use in pole lighting, high corrosion areas, traffic control loops, underpass lighting, outdoor facility lighting
- UL 486D listed, 600V rated
- Waterproof and corrosion proof
- 1 -step installation with no twisting required
ITEM: 10975
Select Product
King Innovation 10990 Dryconn Direct Bury Waterproof Wire Connector, Dark Blue; 2/Card
- For use in pole lighting, high corrosion areas, traffic control loops, underpass lighting, outdoor facility lighting
- UL 486D listed, 600V rated
- Waterproof and corrosion proof
- 1 -step installation with no twisting required
ITEM: 10990
Select Product
ITEM: 20122
Select Product
King Innovation 20220 Dryconn Direct Bury Silicone Based Sealant with Tan Wing Wire Connector; 2/Bag
- For use in above ground or direct bury applications, low voltage lighting or two-wire decoder systems
- Patent pending snap fit lid provides strain relief
- Pre-filled with silicone that never hardens
- Waterproof and corrosion proof
- UV and impact resistant
- UL 486G listed, 600V rated
ITEM: 20220
Select Product
King Innovation 20225 Dryconn Direct Bury Wire Connector with Tan Wing Connector; 100/Box
- UL Listed and 600V Rated
- Waterproof and corrosion proof
- Patented snap fit lid provides strain relief
- UV and impact resistant
- Max. Voltage: 600V max. building wire (1000V max. signs or luminaries)
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #8
- Temperature Rating: -105 deg C (221 deg F)
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- UL Designation: GT1
ITEM: 20225
Select Product
King Innovation 20235 Dryconn Direct Bury Silicone Based Sealand with Red/Yellow Gorilla Nut; 100/Box
- UL Listed and 600V Rated
- Waterproof and corrosion proof
- Patented snap fit lid provides strain relief
- UV and impact resistant
- Max. Voltage: 600V max. building wire (1000V max. signs or luminaries)
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #8
- Temperature Rating: -105 deg C (221 deg F)
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- UL Designation: GT2
ITEM: 20235
Select Product
ITEM: 20255
Select Product
ITEM: 20250
Select Product
King Innovation 20525 Dryconn Direct Bury with Nut, Yellow; 100/Box
- UL 486D listed for waterproof and direct bury
- Maximum 600-Volt
- UV resistant for above ground applications
- Pre-filled with a dielectric silicone sealant that never hardens
ITEM: 20525
Select Product
King Innovation 20635 Dryconn Direct Bury with Orange/Blue Gorilla Nut; 100/Box
- UL 486D Listed for waterproof and direct bury
- Maximum 600 Volt
- UV resistant for above ground applications
- Pre-filled with a dielectric silicone sealant that never hardens
ITEM: 20635
Select Product
ITEM: 61145
Select Product
King Innovation 10670 Dryconn Direct Bury Waterproof Wire Connectors, Blue; 100/Box
- For use in pole lighting, high corrosion areas, traffic control loops, underpass lighting, outdoor facility lighting, manufacturing hose down areas
- UL 486D listed, 600V rated
- Waterproof and corrosion proof
- One-step installation with no twisting required
ITEM: 10670
Select Product
King Innovation 61148 Dryconn Waterproof Wire Connectors, Black/White; 500/Canister
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
ITEM: 61148
Select Product
King Innovation 61245 Dryconn Waterproof Wire Connector, Black/Gray; 100/Bag
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
ITEM: 61245
Select Product
King Innovation 61350 Dryconn Waterproof Wire Connector, Black/Blue; 50/Canister
- For use in irrigation, landscape lighting and direct bury applications
- Waterproof and corrosion proof
- UL 486D listed, 600V rated
- 1 step installation with no pre- twisting of wires necessary
ITEM: 61350
Select Product
King Innovation 63315 Dryconn Direct Bury Silicone Based Sealant, Yellow; 10/Bag
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
ITEM: 63315
Select Product
King Innovation 63350 Dryconn Waterproof Wire Connector, Yellow; 100/Box
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
ITEM: 63350
Select Product
King Innovation 63415 Dryconn Waterproof Wire Connectors, Black; 15/Canister
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
ITEM: 63415
Select Product
King Innovation 63475 Dryconn Waterprrof Wire Connector, Black; 100/Box
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
ITEM: 63475
Select Product
King Innovation 63650 Dryconn Direct Bury Waterproof Wire Connector, Aqua; 100/Box
- UL Listed 600V for dry, wet or above/below grade applications when used in an enclosure
- For use in Direct Bury applications when operating at 30V or less
- Pre-filled with dielectric silicone sealant that never hardens
- Waterproof and corrosion proof
- Easy latch lid provides strain relief
- One piece for easy installation
- Silicone Sealant Temperature: -45 deg F to 400 deg F
- Designed for tracer splices and cathodic applications
- Max. Voltage: 600V
- Wire Type: Copper/Copper
- Wire Range: Min #22/Max #6
- Silicone Sealant: -45 deg F to 400 deg F
- UL Designation: MSR
ITEM: 63650
Select Product
King Innovation 98010 Dryconn Visilock Waterproof Wire Connector; 1/Box
- Making tap or branch splices on insulated cables rated up to 100 Volt
- Waterproof and corrosion proof
- SmartGel is a non-toxic formula which eliminates haz-mat requirements
- Locking mechanism centers splice in box
ITEM: 98010
Select Product