Adjustable Recessed Lighting

What We Stock

• Apertures from 2" to 8" — 2" and 3" for accent and tight cavities, 4" for general and task lighting, 6" and 8" for wider coverage and higher ceilings.
• CCT-selectable models — most fixtures let you set color temperature at install, so one SKU covers multiple rooms or a mixed-spec job.
• Canless and J-box options — SnapTrim floating and external J-box models wire directly in with no separate housing, which clears shallow cavities and cuts install time.
• Retrofit models — 5"/6" adjustable retrofits drop into existing can housings, so you can add aiming to an installed layout without opening the ceiling.
• Wet-location and fire-rated options — available on select models where the application requires them.

Choosing an Adjustable Recessed Light

Start with aperture and output for the mounting height, then confirm three things against your spec: the listing you need for the location (dry, damp, or wet), whether the ceiling assembly requires a fire-rated fixture, and dimming compatibility with the control you're using. If the fixture is going into an existing can, check the housing diameter and depth before ordering a retrofit.

Need help laying out fixture count and spacing? Request a free lighting design and layout and our team will size the job for your space.

Frequently Asked Questions

What is an adjustable recessed light?

An adjustable recessed light uses a gimbal or eyeball trim that pivots inside the fixture, so the beam can be aimed after installation rather than pointing straight down. Fixed downlights cannot be redirected once they are mounted.

Can I add adjustable recessed lights to existing can housings?

Yes. Adjustable downlight retrofit models install directly into an existing can housing with no additional cutting or wiring. Confirm the housing diameter and cavity depth before ordering, since retrofits are sized to fit specific can dimensions.

Do adjustable recessed lights need a separate housing?

Not always. Canless and J-box models integrate the LED, driver, and trim into one unit that wires directly into the electrical box, which works well in shallow ceiling cavities. Housing-based models are the better choice when you want to change the trim or lamp later.

Are adjustable recessed lights available for damp or wet locations?

Select models carry a damp or wet location listing. Check the listing on the individual fixture and match it to the installation environment, since standard dry-location fixtures should not be used where they may be exposed to moisture.

Can adjustable recessed lights be dimmed?

Many models are dimmable, but compatibility depends on the driver and the dimmer you are pairing it with. Confirm the dimming protocol on the fixture specification sheet against your control before ordering, and contact us if you need help verifying a combination.

What size adjustable recessed light do I need?

Aperture depends on mounting height and whether the fixture is providing accent or general light. Smaller 2" and 3" apertures suit accent and detail lighting, 4" handles most general and task applications, and 6" and 8" cover wider areas and higher ceilings.