Airfield & Airport LED Lighting Page 5

Understanding Scope: Facility Lighting vs. Airfield Guidance Systems

This collection covers general-purpose commercial LED products for airport buildings, support structures, and outdoor areas. Contractors searching for airport runway lights for sale should note that FAA-regulated airfield guidance equipment, including embedded runway edge lighting and approach path systems, falls outside this scope. What's covered here is the surrounding facility: hangars, terminals, FBO lobbies, ramps, parking areas, and service buildings.

Foot-Candle Targets by Space

IES illuminance recommendations for airport environments vary by zone. Terminal check-in and gate areas typically target 30 to 50 maintained foot-candles. Hangar work floors call for 50 foot-candles at the task plane, with higher levels designated for inspection stations. Surface parking lots and perimeter roadways fall in the 1 to 3 foot-candle range. Photometric planning that maps actual targets to each zone prevents both over-spec in low-activity areas and under-spec where precision work happens.

Fixture Ratings for Hangars and Cargo Buildings

Hangars and cargo facilities introduce conditions that standard warehouse fixtures aren't built for. Where pressure washing, humidity variation, or chemical exposure are part of normal operations, IP65-rated vapor tight fixtures or wet-location-rated high bays are the correct choice. Confirming the actual ambient conditions in each space before selecting a fixture type is a straightforward step that prevents callbacks.

DLC Listings and Rebate Eligibility

Large-scale LED upgrades at airport facilities frequently qualify for utility rebate programs, particularly hangar and terminal retrofits that replace high-wattage legacy systems. DLC-listed fixtures are the standard threshold for most utility programs. Warehouse Lighting offers rebate assistance to help contractors identify applicable programs and compile the documentation required to submit claims.

Does this collection include runway lights, taxiway lights, or approach lights?

No. Runway lights, airport taxiway lights, approach lights, and solar runway lights are FAA-regulated airfield guidance systems that fall outside the scope of this collection. The products here cover commercial LED applications for the surrounding facility: hangars, terminals, ramp areas, parking, and support structures. If you're sourcing lighting for airport buildings or outdoor support zones rather than certified airfield systems, this is the right starting point.

What LED high bay wattage is appropriate for an aircraft hangar?

It depends on ceiling height and target foot-candle level. For a 25- to 30-foot ceiling targeting 50 foot-candles at the floor, a 150W to 200W UFO high bay is typically the right range. Taller ceilings (35 feet and above) or inspection areas with higher illuminance requirements may call for 240W to 320W fixtures. A photometric layout will give you the most accurate answer for a specific space, and Warehouse Lighting offers free layout assistance if you want the spec confirmed before ordering.

Are the LED canopy and flood lights in this collection rated for outdoor airport applications?

Yes. The LED canopy lights and flood lights in this collection are wet-location rated and suitable for covered passenger drop-off areas, open-air ramps, fuel station canopies, and surface parking. Look for fixtures with an IP65 rating or higher for any application that involves direct weather exposure or periodic washdown. Vapor tight options in the high bay category also carry IP65 or IP66 ratings for enclosed outdoor or semi-outdoor structures, such as cargo bays.

What kind of energy savings can airports expect by switching from metal halide to LED?

A typical metal halide high bay in the 400W to 1000W range can be replaced with an LED fixture drawing 100W to 200W, producing equivalent or better lumen output. Across a large hangar or terminal, that reduction compounds quickly. Combined with LED's longer rated lifespan (50,000+ hours vs. 15,000 to 20,000 hours for metal halide) and reduced re-lamping labor, the total cost of ownership shift is significant. DLC-listed fixtures in this collection are eligible for utility rebates that can offset a meaningful portion of upfront project costs.

What color temperature works best for hangar maintenance and inspection work?

4000K or 5000K is standard for maintenance environments. At 5000K, the daylight-range output improves contrast and color differentiation, which matters for detailed inspection work on aircraft surfaces, fasteners, and components. Terminal and office spaces are generally more comfortable in the 3500K to 4000K range.