When it comes to getting the right lighting for your location, there are certain tools and equipment that Electricians, Electrical Contractors, Maintenance and Telecom Professionals need within their toolbox. For your convenience you can select from our electrical Hand Tools, Testers, Meters, Wire Pulling and other Electrical Installation Tools.
- Neon lamps indicate 7 common wiring conditions
- Wiring condition legend is listed on top and bottom of tester
- GFCI function tests GFCI and standard outlets wired in series with GFCI outlets (eg. multiple outlets in kitchen or bath)
- Compact ergonomic design with over-molded rubber grips for comfort
- Lifetime warranty
- Tests standard 3-wire and GFCI protected 120V outlets
- Patented, snap-in leads are spaced to fit a standard outlet for easy, "hands-free" testing
- No battery needed
- 10 foot drop and 250 pound crush rated
- Hi-Vis voltage indication
- Tests 80-250 Vac/Dc Voltage
- Indicator, Contoured Design, Hi Impact Abs Housing, Pocket Clip
- Enhanced True RMS circuitry
- 2000 Amp AC/DC
- Low pass AC filtering
- Includes convenient wrist strap
- Data hold capability to maintain reading on display
- Peak hold function to display in-rush current
- Operates from one 9 volt battery
- Detects unenergized, unshielded wires and cables install in the wall
- Distinguishes multiple wire combinations
- Operates from one AA battery
- Operates from one AA battery
- Heat-treated steel frame for tool durability with RJ-45 and RJ-11 crimp stations
- Cuts and strips LAN twisted pair cables CAT 3 through CAT 6 Ethernet
- Verifies that crimps are correct or indicates faults
- Extremely durable impact resistant handles provide protection against accidental drops
- Measures AC/DC Voltage, AC/DC Amperage, Resistance, Diode Test, Continuity, Capacitance, Frequency, Duty Cylce
- Operates from one 9 volt battery
- Relative Delta displays change in readings
- Data hold feature captures reading on the display
- Thin design - less than 1" thick
- Features backlit display, data hold function, min/max function, and auto off function
- CAT III 600V rating
- Measure AC/DC voltage, AC current, resistance, continuity
- Measure capacitance, duty cycle, temperature, diode, and non-contact voltage
- Enhanced bluetooth functionality - removable clips, datalogging, GPS integration
- Non-contact voltage tester features a built-in flashlight
- Audible and 360 visual indications
- GFCI outlet tester features advanced ground testing circuitry that precisely detects required low resistance values
- Provides immediate indication of the wiring error, no need for a chart to carry, memorize or interpret
- Single LED provides immediate indication of the wiring error, no need for a chart to carry, memorize or interpret!
- Advanced ground testing circuitry precisely detects the required low resistance values
- Hi-impact ABS housing withstands a 10ft drop and offers a 250 pound crush rating
- Bright 360 LED indicator light
- Test lead input icons for correct lead placement
- Industry leading LCD display size
- Large digits for easy viewing
- AC/DC voltage and current capable
- Data hold feature captures reading on the display
- Impact resistant housing
- Operates from (2) AAA batteries, included
- Measures AC Current, AC/DC Voltage, Resistance, Continuity, Diode Test
- Min/Max function to hold either minimum reading or maximum reading on the display
- Operates from one (2) AAA battery
- Auto power off functionality to save battery life
- Includes convenient carrying case
- Auto ranging capability allows the meter to automatically determine the resolution based on the application
- Compact, lightweight design
- AC/DC voltage capable with temperature measurement functionality
- Impact resistant housing
- Operates from (2) AAA batteries, included
- Built-in flashlight
- Non-Contact sensing circuit detects 50-1000V AC
- Audible and 360 visual indication
- Operates from single AAA battery
- Patented battery self-test feature
- Data hold and relative measurement capability to maintain reading on display
- Auto power off functionality to save battery life
- Compact lightweight design to fit into any tool belt or small area
- Includes convenient carrying case to protect the meter and keep it clean
- Audible alert and bright LED visual indication for easy identification
- Combined multi-scanner and electrical tester simplifies installation of electrical boxes, switches and outlets.
- 3-selectable modes: stud scan, metal scan or AC Voltage
- Detects metal pipes or objects to a maximum depth of 2.5 inch through drywall
- Scans and locates wood or metal studs at a depth up to 0.75 inch
- Non-contact AC voltage detection (50-600V AC) to a maximum depth of 3.5 inch through drywall
- Integrated 3-wire wall outlet with GFCI test functionality
- Built-in metal tip for marking stud edge, pipe location or desired mounting point
- Over-molded rubber grips
- Audible and visual indication
- Operates from one 9 volt battery
- Auto ranging
- Manual range mode
- Polarity indication
- Low battery indicator
- Overload protection
- Over-range indication
- Auto shut off
- Built-in lead storage
- Includes convenient carrying case, heavy duty leads and batteries
- 27 ranges, 9 functions
- 200A AC, 600V AC/DC
- 3999 count backlit screen
- 13MM open jaw design for ease of measurement
- CAT III 600V and cETLus listed
- Compact lightweight designs to fit into any tool belt or small area
- Includes convenient carrying case to protect the meter and keep it clean
- Audible alert and bright LED visual indication for easy identification
- Auto power off functionality to save battery life
- 1x and 10x measuring capability
- Separates hot and neutral conductors of power cords when testing AC amp draw of light duty machinery, power tools, appliances and lamps
- Probe slots for voltage measurement with a voltage tester
- Dual Check features bright 360 degree viewable LED indicator lights and beeping audible indicator
- Dual Check is also impact resistant up to 10 ft. and offers a 250-pound crush rating
- Multimeter features 3999 count LCD Display for easy reading and diagnosis
- Multimeter measures AC/DC Voltage, Resistance, Frequency, Continuity, Duty Cycle, and Diode Test along with overload protection on all ranges
- Verify the presence of AC voltage prior to working on eletrical installation or troubleshooting
- Standard 3-wire and GFCI protected 120V outlets - the tester is protected
- Detects the presence of AC Voltage and tests for wiring errors in wall outlets as well as GFCI operation
- Non-contact sensing circuit senses voltage from 80-1000 volts AC
- Built-in flashlight
- The adjustable Volt Sensor allows for sensitivity adjustments in multiple-wire applications when precision and safety are crucial.
- Adjustable non-contact sensitivity detects voltage from 12-1000V AC
- Audible and 360 visual indication
- Operates from single AAA battery
- Patented battery self-test feature
- Pocket Clip
- Measures AC/DC Voltage, Resistance, Frequency, Continuity, Duty Cycle, and Diode Test
- Auto ranging
- Overload protection on all ranges
- Data hold feature captures the reading on the display
- Auto power off and low battery indicator
- 3999 Count LCD Display
- Relative delta displays changes in reading
- Pocket-sized design for easy use, storage and transportation
- Designed to CAT II 600V
- Save time and money with 2 popular testers in 1 unit - featuring a Non-Contact Voltage Detector on one end and GFCI Outlet Tester on the other
- Bright 360 deg viewable LED indicator lights
- Single LED provides immediate indication of the wiring error, no need for a chart to carry, memorize or interpret!
- Beeping audible indicator confirms presence of voltage
- Hi-impact ABS housing withstands a 10 ft drop and offers a 250 pound crush rating
- Measures AC/DC Current, AC/DC Voltage, Resistance, Continuity, Capacitance, Temperature, Diode Test, and includes integrated Non-Contact Voltage Detection
- Precise True RMS circuitry
- Auto-power off functionality saves battery life
- Includes convenient carrying case
- Peak hold function to display in-rush current
- Capacitance and temperature measurement functionality
- Operates from (2) AAA batteries
- Patented, snap-in leads are spaced to fit a standard outlet for easy inchone-hand inch testing
- Hi-Visibility voltage indication
- Test for voltages from 80-250V AC/DC
- Compact ergonomic design with soft grips for comfort
- 10 foot drop and 250 pound crush rated
Frequently Asked Questions
What are Electrical Tools?
Electrical tools are the tools that are used to work on electrical systems. These can include a wide range of tools such as wire and cable cutters, wire strippers, coaxial compression tools, telephony tools, wire cutter/strippers, cable tie tools, accessories and even more. Here are some example electrical hand tools:
What are the Various Types of Electrical Tools?
Electrical work requires tools. For most electrical projects, basic hand tools such as a hammer, tape measure, level, and screwdrivers are all that are necessary. Other electrical hand tools include:
- Pliers
- Screwdrivers and nut drivers
- Wire strippers Fishing tools
- Measuring devices
- Labeling machines
- Power drills and drivers, hammer/drills
- Power saws
- Meters
- Testers