High Bay LED Lighting
Industrial Low Bay Lighting
Industrial Strip Lights
Vapor Tight Lighting
LED Shop Lights
LED Ready Fixtures
Hazardous Area / Explosion Proof Lighting
Loading Dock Lights
Construction / Portable Lighting
High Temperature LED Lights
Industrial Ceiling Fans
LED Work Lights
Networked Controlled Lighting
American Made Industrial Lighting
Clearance
Troffer Lights
LED Flat Panel Lights
Drop Ceiling Lights
LED Ready Troffers
Suspended LED Lights
LED Cylinder Lights
Stairway & Corridor Lighting
Hospital Bed Lights
Wrap Lighting Fixtures
Gooseneck and Barn Lights
Commercial Sign Lights
LED Track Lighting Fixtures & Systems
Recessed Lighting
Wafer Lighting
RGB LED Lights
Exit / Emergency
Refrigeration Lighting
Grow Lights
UV Disinfecting Lights & Air Purifier Fixtures
American Made Commercial Lighting
LED Flood Lights
Outdoor Wall Lights
LED Area Lights
Parking Lot Lights & Poles
Outdoor Post Top Lights
LED Stadium Lighting
Canopy Lights
Security & Motion Sensor Lights
LED Bollard Lights
Outdoor Barn Lights
Solar Powered LED Lighting
Dusk to Dawn Lights
Landscape Lighting
Outdoor String Lights
Coastal Wildlife Lighting
Outdoor House Lights
American Made Outdoor Lighting
Architectural Linear Lights
Architectural Grid Mount Lights
Architectural Round Pendant Lights
Architectural Square Linear Lights
Architectural X-Shaped Linear Lights
Architectural LED Wall Packs
Ceiling Fans
Ceiling Lights
Chandelier Lights
Pendant Lighting
Island Lights
Under Cabinet Lighting
Vanity Lights
Wall Sconces
LED Tape Lights
LED Mirrors
LED Light Bulbs
LED Tube Lights
LED Corn Lights
Vintage LED Bulbs
Decorative LED Bulbs
Fluorescent Light Bulbs
Metal Halide Lamps
LED Magnetic Strip Retrofit Kits
LED Strip Light Retrofit Kits
High Bay LED Retrofit Kits
LED Troffer Retrofit Kits
LED Wall Pack Retrofit
LED Street Light Retrofit Kits
Recessed Lighting LED Retrofit Kits
WareSense Blue - Bluetooth Control System
Ballasts & Drivers
Emergency Ballast For LED & Fluorescent Lights
Electrical Supplies & Mounting Kits
Electrical Tools
Switches & Receptacles
Electrical Power Cords
Sensors and Timers
Smart Home Automation
High Bay Occupancy Sensors
Electric Vehicle Chargers
Hand Dryers
LED Shop Lights
Garage LED Lighting
Gym Lighting
Factory Lights
Restaurant Lights
Office Lights
Classroom Lights
Church Lights
Warehouse Lights
Hospital Lights
Walkway Lights
Parking Lot Lights
Exterior Building Lights
Sports Lighting
Airport Lights
NSF Rated Lights
TAA LED Lighting
Corridor Lights
Barn Lighting
Multi-Family Lighting Solutions
LED factory lighting illuminates manufacturing plants, assembly areas, and production floors with bright, even, energy-efficient light. Because factories combine high ceilings, task-intensive work, and demanding conditions — dust, moisture, temperature swings, and sometimes hazardous materials — they rely on a mix of high bay, low bay, strip, vapor-tight, and explosion-proof fixtures. Upgrading to LED cuts energy and maintenance costs, improves visibility and safety, and delivers instant-on light that holds up to round-the-clock operation. Explore factory fixtures by type below.
1 product
Sale
ITEM: MPC-50H
Regular price$71.00
$38.00
Light Built for the Factory Floor
Factories ask a lot of their lighting: high mounting heights, long run hours, and tough conditions from dust and moisture to extreme temperatures. The right mix of high bay, low bay, strip, and specialty fixtures keeps every zone bright, uniform, and code-compliant — while LED keeps energy and maintenance costs down.
Choosing the Right Factory Lighting
Most factories use several fixture types, matched to ceiling height and the conditions in each area:
- High ceilings (20 ft and up): UFO and linear high bay fixtures deliver high output across open production and warehouse space.
- Lower ceilings & mezzanines (under ~20 ft): Low bay fixtures spread light evenly without glare in lower areas.
- Aisles, racking & task areas: Industrial strip lights give linear, even coverage over lines and walkways.
- Wet, cold & washdown areas: Vapor-tight fixtures are sealed against moisture, dust, and contaminants.
- Hazardous & combustible environments: Explosion-proof fixtures are rated for areas with flammable gases, vapors, or dust.
- Egress & safety: Exit signs and emergency lights keep the facility code-compliant and safe during outages.
Key Considerations for Factory Lighting
- Mounting height & output: Higher ceilings and larger bays need higher lumen output. Size fixtures to the height and the task below them.
- Color temperature: 4000K–5000K is typical for factories, giving crisp, high-visibility light for detailed work.
- Controls: Occupancy sensors and daylight harvesting cut runtime in aisles and intermittently used zones for major energy savings.
- Durability & rating: Choose IP-rated, impact-resistant fixtures where dust, moisture, or wash-downs are a factor.
- New vs. retrofit: High bay retrofit kits convert existing HID fixtures to LED without replacing the whole housing.
- Uniformity & glare: A proper layout keeps light even across the floor and reduces glare and shadowing on the line.
Benefits of Upgrading Factory Lighting to LED
- Lower energy costs: LED draws far less power than HID or fluorescent, and many fixtures qualify for utility rebates.
- Instant-on: Full brightness immediately, even in cold areas, with no warm-up or restrike delay.
- Less maintenance: Long LED life means fewer relamps on hard-to-reach high mounts — less downtime and fewer lift rentals.
- Safer workplace: Bright, uniform light improves visibility and helps reduce accidents on the floor.
- Controls-ready: Easy to pair with sensors and dimming for automated, efficient operation.
Factory Lighting FAQs
What is the best lighting for a factory?
Most factories use high bay fixtures for high ceilings, low bay for lower areas, and strip lights for aisles and task areas, plus vapor-tight and explosion-proof fixtures where conditions demand. LED is the standard choice across all of these for its efficiency, light quality, and low maintenance.
How many lumens do I need for factory lighting?
It depends on ceiling height, the task, and the area. General manufacturing often targets around 30–50 footcandles, while detailed assembly or inspection work needs more. The best approach is a photometric layout based on your mounting height and floor plan — we offer free lighting layout help.
What is the difference between high bay and low bay lighting?
High bay fixtures are designed for ceilings roughly 20 feet and higher, while low bay fixtures are for ceilings under about 20 feet. Both light the floor below, but they use different optics and output to suit the mounting height.
What lighting do factories use in wet or hazardous areas?
Wet, dusty, or washdown areas call for sealed vapor-tight fixtures. Areas with flammable gases, vapors, or combustible dust require UL-listed explosion-proof fixtures rated for that specific hazardous location.
Why should I switch factory lighting to LED?
LED uses far less energy, turns on instantly even in cold conditions, lasts much longer with less maintenance on high mounts, and provides better, more uniform light. Many fixtures also qualify for energy rebates.
Can factory lighting be controlled with sensors?
Yes. Occupancy sensors and daylight harvesting let lights dim or switch off in aisles and intermittently used zones, cutting runtime and energy use while keeping active areas fully lit.
