LED Canopy Light, 7700 Lumens, CCT and Wattage Selectable, 120-277V

Who This Fixture Is For

This LED Canopy Light is a good fit for property managers, facility teams, and electrical contractors handling covered exterior lighting on commercial and institutional properties. The square surface-mount profile installs directly to the ceiling and at 3.22 inches deep works well in installations where headroom is limited or where a flush-to-ceiling appearance is a priority. Selectable wattage and CCT keep procurement simple, letting one SKU serve multiple locations across a site with different output or color temperature requirements. It's particularly suited for:

• Gas station and fueling station canopies
• Covered walkways and building entry points at schools, hospitals, and office buildings
• Parking structure ceilings and lower deck bays
• Building soffits and outdoor aisle lighting under overhead cover
• Retrofit projects replacing aging HID canopy fixtures
  

Major Benefits

The WL-SMSC-55 delivers up to 7,700 lumens at 135-140 lm/W in a compact square housing with a built-in mounting plate that keeps installation straightforward. cULus listing, DLC Premium v5.1 certification, three selectable wattage levels, and 0-10V dimming make it a practical choice on projects where rebate eligibility and energy code flexibility both factor into fixture selection.

DLC Premium v5.1 Certification Supports Utility Rebates

DLC Premium represents the higher-efficiency tier within the DesignLights Consortium qualification program, and most utility rebate programs in the U.S. and Canada reserve their largest incentives for Premium-listed products. For projects running multiple canopy fixtures in a parking structure, gas station, or multi-building campus, this certification can reduce net installed cost compared to standard DLC-listed alternatives that may not qualify for the same rebate amounts.

Three Selectable Wattage Settings

At 36W, 45W, or 55W, this fixture covers a lumen output range from 5,040 to 7,700, allowing the installer to match brightness to the ceiling height and footprint of each location without sourcing a separate product. This is particularly useful on projects with mixed covered areas where a loading dock soffit and a parking deck bay may need different output levels but benefit from using the same fixture.

CCT Flexibility in 3500K, 4000K, and 5000K

Three color temperature settings give the installer the ability to match the visual tone of adjacent interior spaces or meet a site-specific preference. Cooler temperatures in the 4000K to 5000K range tend to read naturally in open parking and exterior environments, while 3500K suits covered entry points and transitional zones where a slightly warmer tone is preferred.

Low-Profile Stamped Steel Housing

At 3.22 inches deep, the fixture keeps a low ceiling profile in installations where protruding fixtures create clearance concerns, such as parking garage entries or covered aisles where vehicle traffic passes close to the ceiling plane. The stamped steel housing and weather-proof electronics compartment hold up in the temperature variation and moisture exposure common to covered exterior environments, and the included mounting plate simplifies ceiling installation.