LED Explosion Proof Hazardous Location Light, Class 1 Division 1, 11200 Lumens, 80W, 5000K, 100-277V, D Series

Product Description

The D-Series 80-watt, 11,200-lumen explosion proof fixture is the lower-wattage configuration in the Class 1, Division 1 certified lineup, designed for classified zones where the ceiling height, room footprint, or required illuminance level can be met within the output capacity of this model without requiring the additional wattage and associated heat load of the 100-watt version. Division 1 classification means this fixture is built and certified for locations where flammable gases or vapors are present under normal operating conditions, not just abnormal ones, placing it in the most demanding tier of hazardous area lighting and requiring stricter construction standards than Division 2 certified alternatives.

At 80 watts and 11,200 lumens, this fixture is the correct specification when photometric calculations confirm that the required foot-candle levels at the working plane can be achieved at the installed mounting height using this output tier, avoiding the cost and electrical demand of over-specifying the installation with a higher-wattage unit. For facilities where multiple fixtures are deployed throughout a classified area, right-sizing each fixture to its specific zone reduces energy consumption, simplifies circuit loading, and extends the operational lifespan of each unit by avoiding continuous operation at output levels beyond what the application requires.

The D-Series housing and mounting geometry distinguish this product from the B-Series within the broader explosion proof lineup, offering installation flexibility for ceiling heights, structural configurations, and fixture placement scenarios that the B-Series geometry does not accommodate. At 5000K and with a 100-277V input voltage range, this fixture delivers the same daylight-quality output and broad electrical compatibility as the 100-watt D-Series, with the key distinction being total luminous output and wattage draw. When photometric modeling indicates the 80-watt model falls short of required illuminance targets at the design mounting height, the 100-watt D-Series is the direct upgrade within the same certified series.

FEATURES:

• Wattage: 80W
• Lumens: 11200 LM
• CCT: 5000K
• CRI: 80
• Voltage: 100-277V
• Warranty: 5 Year Limited Warranty
• Ratings: UL Listed, IP66