LED Church Lighting Page 36

Light That Flatters the Room and the People in It

Older HID lamps tend to wash a sanctuary in a flat, greenish light. LEDs with a high color rendering index bring back the warmth of wood pews, stone, and stained glass, and they keep skin tones looking natural during a sermon. The fixtures here run from a warm 2700K up through 5000K, so you can match the mood of the space.

Enough Output for Tall Ceilings

A vaulted nave or a gym needs real lumens to light the floor from that height. Plenty of fixtures in this collection push past 20,000 lumens, with some high-output models well above 40,000, so you can hit usable light levels without crowding the ceiling with fixtures.

Long Life Where Access Is Limited

The lights over a sanctuary or gym are the ones you least want to climb up to. Our LED fixtures carry long-rated lifespans and multi-year warranties, which means fewer trips up the lift and fewer Sunday mornings spent working around a dead lamp.

Lower Operating Cost and Rebate Eligibility

An LED swap cuts the wattage of the fixture it replaces, and a large share of this collection carries a DLC or DLC Premium listing. That listing is usually what qualifies the fixture for a utility rebate, and our rebates and incentives page shows how to find your local program.

Should every fixture in the church be the same color temperature?

For the house and ambient areas, yes, keep them consistent. Mixing a 3000K fixture next to a 4000K one reads as a mistake, even to people who do not know why. Most sanctuaries land around 3000K to 3500K for a warm, reverent feel. The stage is where you can break that rule, since color-changing and adjustable fixtures let you shift the look for different services.

How many lumens does it take to light a sanctuary with a high ceiling?

It depends on the ceiling height and the floor area, so there is no single number. As a rough starting point, the taller the ceiling, the higher the lumen output you need per fixture to get usable light down at seat level. Rather than guess, send us your room dimensions and ceiling height and we can run a photometric layout so you order the right output the first time.

What should I look for so the lighting does not ruin our livestream?

Cameras are pickier than eyes. Look for a CRI of 90 or higher so faces record accurately, and confirm the fixture is flicker-free, since older ballasted lighting shows up as banding or pulsing on video. Dimmable fixtures also help, so you can balance the stage against the camera without blowing out the shot.

Can I use the same fixtures inside and outside the building?

Only the ones rated for it. A good portion of this collection carries damp or wet location ratings, and many exterior-suitable models are IP65 or higher for rain and washdown. Check the rating on the product page before you put an indoor fixture under a soffit or over an entrance.

How much can a church save by switching to LED?

Savings depend on the fixtures replaced and hours of use, but LEDs typically cut lighting energy substantially compared with incandescent, fluorescent, or HID, and may qualify for utility rebates.

Can someone help plan our church's lighting?

Yes. Our account managers can help you spec fixtures and lay out a plan for your sanctuary and the rest of your facility. Contact us and we'll be glad to help.