Clearance Lighting, Accessories & Lighting Fixtures

Clearance Item - All Sales Final

• Matching Dimmer Remote for use with Decora Digital or Decora Smart Dimmers
• Dual voltage for 120VAC and 277VAC applications
• For use in 3-way or up to 4 additional locations
• LED Locator and Brightness Display tracks main dimmer
• Digital circuitry provides soft fade on/fade off
• Neutral wire required for installation
• White face assembled on device, Ivory and Light Almond faces included

Clearance Item - All Sales Final

• Works with Amazon Alexa for voice control (hub required, Alexa device and hub sold separately)
• 600W LED/CFL, 1800W Incandescent, Z-Wave Plus Certified
• 5 Year Limited Warranty
• White and Light Almond color faces included
• Color Change Kits (DDKIT) available in Black, Gray, Brown, Ivory
• Multi-Location achieved using DD0SR-1 (coordinating) or DD0SR-DL (matching with LED indicator)
• Hot, neutral, load and ground required for installation and traveler for muilti-switch applications optional.

• Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew
• Sensor uses microprocessor and digital sensing technology to continuously monitor and manage humidity levels in a room
• Built-in timer sets the minimum ON time for the ventilation fan. The sensor time settings can be custom set to 10, 20, 30 or 45 minute intervals. The sensor will continue to operate the fan for the minimum time set or until there is a reduction in room humidity level
• A sensitivity level adjustment allows users to adjust the sensor s sensitivity to ambient air to prevent false cycling
• Features an Air Cycle mode which automatically turns ON the ventilation fan for a set period of time and repeats the cycle hourly (eg. 20 minutes ON/40 minutes OFF each hour)
• Replaces a single pole switch for control of ventilation fan or a fan/light combination
• Fits in a standard wall box and requires a neutral for operation
• The device s built-in humidistat control meets CALGREEN requirements for Indoor Air Quality and Exhaust.
• Can be used to comply with the requirements of 2016 California Title 24, Part 6 Indoor Air Quality and Mechanical Ventilation
• Meets the requirements of ASHRAE 62.2
• Five-Year Limited warranty

Clearance Item - All Sales Final

• Brand: Leviton
• Voltage: 277
• Amperage: 15
• NEMA: L7-15R
• Pole: 2
• Wire: 3
• Lifetime warranty
• See spec sheet for more info

Clearance Item - All Sales Final

Features

• Button for manual control and dimming
• Transient surge protection to IEC Level 4
• ESD protection to IEC 1000 4-2 Level 4 to protect against damage
• Green LED locator
• Provides manual ON/OFF
• Provides ON/OFF scene and zone control compatibility
• 2-way status updates
• Protected memory maintains ON/OFF status of loads and during minor power fluctuations
• Control up to 20 residences, 99 devices, 50 rooms, 50 scenes, 50 activities, and 50 schedules per account.
• DW3HL-1RW is an identical product in larger retail packaging

Benefits

• Control your lights from anywhere using the free My Leviton app for iOS and Android, no hub required.
• Voice Control using Amazon Alexa and Google Assistant devices (sold separately).
• Works with Nest automate lighting based on cameras, thermostats, sensors, and alarms.
• Integrate with IFTTT, utilize auto-shutoff in closets, hallways and bathrooms; plus engage home vs. away to enact randomization of lighting control.
• Simplify control of your home - schedule lights and connected loads to turn on/off at specific times or based on sunrise/sunset, easily group your smart devices into rooms, and create scenes to activate multiple lights at once.
• Designed and engineered in USA; the complete solution (hardware, app and cloud) is manufactured by Leviton

Clearance Item - All Sales Final

• First true industry-exclusive fail safe design assures lights ON meeting life safety requirements of NFPA 101
• Robust power pack meets intense plug load control requirements of CA Title 24/ASHRAE 90.1
• Industry exclusive Switched Daylighting Power Pack models for use with Wall Switches, Occupancy Sensors and Photocells
• Robust and reliable mechanical latching relays specifically designed to operate LED s and high inrush electronic ballast loads
• Surpasses industry standards for short circuit protection (NEMA 410 16 Amp ballast overload testing)
• Tested to exceed 1.5 million switching cycles under standard load
• Built in manual ON switching control to meet CA Title 24 standards
• Models support a wide range of applications including switched daylighting, occupancy sensing control, bi-level switching, and metering/mechanical applications
• Overloaded at 16A

Clearance Item - All Sales Final

• The STKIT bundle includes the Samsung SmartThings Hub, Leviton DZ6HD Z-Wave Universal Dimmer, and Leviton DZ15S Z-Wave Switch
• Easy app-based setup simplifies installation and automation scheduling
• Z-Wave and ZigBee radios allow for attachment of many Leviton Vizia RF + and Lumina RF devices including heavy duty-load controls, fan controls, receptacles, thermostats, and more
• Leviton lighting can activate upon motion using wireless sensors
• Set rules and routines for what the home should do while asleep, awake, away, or home
• Control and automate multiple lights with one button from the iOS, Android, or Windows app
• The included Leviton DZ6HD is a universal dimmer for dimmable LED, incandescent, halogen, and magnetic low voltage. It is rated for 1000W incandescent, 450W LED/CFL and Mark 10, and 1000VA for magnetic low voltage
• The included Leviton DZ15S is a 15A switch for single pole, 3-way or more applications and is rated for 1800W incandescent, 1800VA magnetic low voltage, 1800W electronic low voltage, 1800VA fluorescent, and 1/2 H/P supplemental
• Create a complete home automation eco-system with a wide variety of Works with SmartThings devices including door locks, cameras, thermostats, and more
• Integrate Amazon Alexa voice control of the home with Alexa, turn on the kitchen lights

Clearance Item - All Sales Final

• Sensors combine both PIR and U/S technology for unrivaled performance and reliability. Sensors use PIR technology to initially turn lights ON, and use U/S technology to keep the lights ON. Exclusive false-detection software assures lights are ON only when needed.
• Auto-Adapting: Time delay and sensitivity are continually adjusted to occupancy pattern of use
• Configurable for Manual ON/Auto OFF or Auto ON/Auto OFF
• Delayed OFF Timer: The sensor will turn lights OFF if no motion is detected after a specified time
• Exclusive Walk-through Feature: Provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
• False Detection Timer: (M/T) The PIR scans for movement and shuts lights off after 31 minutes preventing false triggers from HVAC systems
• Time delay and saved settings are protected during power outages and will return to the last known state
• Output short circuit protection
• Industry-exclusive self-configuring local manual switch input: Momentary or maintained switches are supported
• Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied
• Adjustable Time Delay: 30s, 5min, 10min, 20min, 30min
• Test Mode for simplified commissioning
• Manual Switch and Emergency Override are Class 1 and Class 2 circuits. Class 2 circuits provided for flexibility
• Industry-exclusive "fail-safe" circuitry: In the event of product failure, Return-to-Closed feature causes the relay to default ON which eliminates life safety concerns
• Industry-exclusive H.I.S. (High Inrush Stability) technology designed to handle today s high inrush electronic ballast loads and offer unmatched durability and service
• Robust and reliable mechanically held 10A latching relay provides dependability and robust performance for all load types and provides energy savings over electronically held relays
• Lenses are easily replaceable and color-coded red (mid-range) and black (extended range) for contractors and end-users to easily identify lenses from the ground
• Red Visual LED indicator - Blinks when infrared is detecting motion and during photocell manual calibration; solid during device malfunction
• Green Visual LED indicator - Blinks when U/S is detected; solid during auto calibration
• Yellow Visual LED indicator - Blinks during test mode; solid with emergency/BMS input

Clearance Item - All Sales Final

• Sensors combine both PIR and U/S technology for unrivaled performance and reliability. Sensors use PIR technology to initially turn lights ON, and use U/S technology to keep the lights ON. Exclusive false-detection software assures lights are ON only when needed.
• Auto-Adapting: Time delay and sensitivity are continually adjusted to occupancy pattern of use
• Configurable for Manual ON/Auto OFF or Auto ON/Auto OFF
• Delayed OFF Timer: The sensor will turn lights OFF if no motion is detected after a specified time
• Exclusive Walk-through Feature: Provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
• False Detection Timer: (M/T) The PIR scans for movement and shuts lights off after 31 minutes preventing false triggers from HVAC systems
• Time delay and saved settings are protected during power outages and will return to the last known state
• Output short circuit protection
• Industry-exclusive self-configuring local manual switch input: Momentary or maintained switches are supported
• Presentation Mode feature for slide or film presentations allows push buttons to turn lights OFF and keep them OFF while the room is occupied
• Adjustable Time Delay: 30s, 5min, 10min, 20min, 30min
• Test Mode for simplified commissioning
• Manual Switch and Emergency Override are Class 1 and Class 2 circuits. Class 2 circuits provided for flexibility
• Industry-exclusive "fail-safe" circuitry: In the event of product failure, Return-to-Closed feature causes the relay to default ON which eliminates life safety concerns
• Industry-exclusive H.I.S. (High Inrush Stability) technology designed to handle today s high inrush electronic ballast loads and offer unmatched durability and service
• Robust and reliable mechanically held 10A latching relay provides dependability and robust performance for all load types and provides energy savings over electronically held relays
• Lenses are easily replaceable and color-coded red (mid-range) and black (extended range) for contractors and end-users to easily identify lenses from the ground
• Red Visual LED indicator - Blinks when infrared is detecting motion and during photocell manual calibration; solid during device malfunction
• Green Visual LED indicator - Blinks when U/S is detected; solid during auto calibration
• Yellow Visual LED indicator - Blinks during test mode; solid with emergency/BMS input

Clearance Item - All Sales Final

• Black Locking Receptacle
• Mfr. Model #: 4560
• UNSPSC #: 39121406
• Shrouded / Non-Shrouded: Non-Shrouded
• Wiring Style: Standard
• Mounting Type: Flush Mount
• Grade: Industrial
• Material: Nylon
• Amps: 15
• Voltage: 250VAC
• Number of Poles: 2
• Number of Wires: 3
• Color: Black
• NEMA Configuration: L615R
• NEMA Rating: 6
• IP Rating: 67
• Phase: 1
• HP: 1.5
• Standards: UL/CSA/NOM/NEMA WD-6/ANSI C-73