Filter

Rigid Fittings

23 products

1 in., 1/2 in., or 3/4 in. Long Conduit Speed Nipple

ITEM:14504

As low as$1.06
Product Badge Image 1

1 in. Long Conduit Speed Nipple 1/2 in. - Zinc Die Cast - 1 in. Long Conduit Speed Nipple Used with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box.>;

1 in. Long Conduit Speed Nipple 1/2 in. features include:

  • Use with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box
  • Use with a Locknut to provide a Short Raceway between Boxes and enclosures
  • Die Cast Zinc
  • cULus Listed
  • Order Qty of 1 = 1 Pieces

Below is more info on our 1 in. Long Conduit Speed Nipple 1/2 in.

Product Badge Image 1

ITEM: 14504

As low as $1.06
Select Product

90 Malleable Concrete Slab Inserts 1/2 in.

ITEM:14423

As low as$15.83
Product Badge Image 4

Features include:

  • Allows In-Slab Ceiling Drops & Floor Mounts in Poured Concrete
  • Provides Flush Threaded Conduit Hub for mounting, pulling, & future access to conduit systems
  • Design allows In-Slab Conduit System Prefabrication
  • Designed to Eliminate Bending of Conduit in Slabs over 4 in. Thick
  • Designed for 90; Bends Through Conduit Runs
  • cULus Listed
  • Concrete Tight
  • Order Qty of 1 = 1 Pieces
  • <\/ul>
Product Badge Image 4

ITEM: 14423

As low as $15.83
Select Product

Rigid Water Tight Hubs

ITEM:14800

As low as$3.42
Product Badge Image 4

Features include:

  • To secure threaded Rigid Service Entrance conduit & IMC to box or enclosure in a WaterTight Application
  • Assembled with 221;F (105C) rated flame retardant Lexan throat insulator and BUNA-N sealing ring that completely encircles knockout to prevent contaminants from entering enclosure
  • For use in Wet Locations
  • cULus Listed
  • Order Qty of 1 = 1 Piece
  • <\/ul>
Product Badge Image 4

ITEM: 14800

As low as $3.42
Select Product

Grounding Locknuts -Steel

ITEM:14744

As low as$0.79
Product Badge Image 4

Features include:

  • Used with bushings to bond threaded Rigid conduit and IMC to boxes, cabinets, or other enclosures where locknut is exposed
  • Grounding locknuts for securing threaded conduit or connectors with tapered or straight thread, to a knockout or unthreaded slip hole in a Box or Enclosure
  • Grounding Locknut has Integral Ground Screw to Facilitate Grounding to Enclosure
  • Galvanized Steel
  • cULus Listed
  • Order Qty of 1 = 1 Piece
  • <\/ul>
Product Badge Image 4

ITEM: 14744

As low as $0.79
Select Product

Sealing Locknuts, Steel

ITEM:14754

As low as$0.87

Features include:

  • Sealing locknuts provide a rain-tight seal when securing threaded conduit or connectors with tapered or straight thread, to a knockout or unthreaded slip hole of a box or enclosure
  • Sealing Locknut has a Integral Gasket
  • Galvanized Steel
  • Order Qty of 1 = 1 Piece
  • <\/ul>

ITEM: 14754

As low as $0.87
Select Product

Locknuts, Steel

ITEM:14730

As low as$0.13
Product Badge Image 4

Features include:

  • Conduit locknuts for securing threaded conduit or connectors with tapered or straight thread, to a knockout or unthreaded slip hole
  • Galvanized Steel
  • cULus Listed
  • Order Qty of 100 = 100 Pieces
  • <\/ul>
Product Badge Image 4

ITEM: 14730

As low as $0.13
Select Product

Locknuts, Zinc

ITEM:14720

As low as$0.09

Features include:

  • Conduit locknuts for securing threaded conduit or connectors with tapered or straight thread, to a knockout or unthreaded slip hole
  • Zinc Die Cast
  • UL/CSA Listed
  • Order Qty of 100 = 100 Pieces
  • <\/ul>

ITEM: 14720

As low as $0.09
Select Product

Reducing Washers

ITEM:14620

As low as$0.07

Features include:

  • Use to reduce the size of the knockout in a steel outlet box or other metal enclosure or cabinet
  • Must use one inside the enclosure opening and one on the outside
  • Galvanized Steel
  • Order Qty of 100 = 100 Pieces
  • <\/ul>

ITEM: 14620

As low as $0.07
Select Product

Steel Reducing Bushings

ITEM:14660

As low as$0.70

Features include:

  • Reduce the Trade Size of a Tapered Entry on a Conduit Fitting
  • Threaded for Rigid and IMC condulets, Hex Shoulder
  • Rolled edge protects wire insulation
  • Order Qty of 1 = 1 Piece
  • <\/ul>

ITEM: 14660

As low as $0.70
Select Product

Malleable Reducing Bushing

ITEM:14700

As low as$16.27

Features include:

  • Reduce the Trade Size of a Tapered Entry on a Conduit Fitting
  • Threaded for Rigid and IMC condulets, Hex Shoulder
  • Rolled edge protects wire insulation
  • Malleable Iron
  • Order Qty of 1 = 1 Piece
  • <\/ul>

ITEM: 14700

As low as $16.27
Select Product

Grounding Bushing with Insulated Throat with Aluminum Ground Lug

ITEM:14570

As low as$2.90

Features include:

  • Used with a locknut to terminate threaded Rigid and IMC conduit to a box or enclosure
  • Lug provides for bonding jumper to a neutral bus bar
  • Thermoplastic liner prevents damage to wire insulation
  • Set-screw provided with each fitting locks bushing in any desired position
  • Resists corrosion, chemicals, and temperature extremes
  • Die Cast Zinc
  • UL/CSA Listed
  • Order Qty of 1 = 1 Piece
  • <\/ul>

ITEM: 14570

As low as $2.90
Select Product

Conduit Bushings

ITEM:14530

As low as$0.32
Product Badge Image 4

Features include:

  • Used with a locknut to terminate threaded Rigid and IMC conduit to a box or enclosure
  • Bushings rounded surface prevents damage to wire insulation during pulling
  • Zinc Die Cast
  • cULus Listed
  • Order Qty of 1 = 1 Piece
  • <\/ul>
Product Badge Image 4

ITEM: 14530

As low as $0.32
Select Product

Thermoplastic Conduit Bushings

ITEM:21732

As low as$0.13

Features include:

  • Threaded plastic inserts for RIGID or IMC conduit
  • Use to Protect Conductors in Rigid or IMC Conduit from Abrasion/Damage during Pull
  • Thermoplastic material—heat, impact and torque resistance
  • Strong reinforcing ribs & rim around bottom
  • Flame retardant Polypropylene (Rated to 221;F, 105C)
  • 1/2 in wide
  • Threaded plastic inserts are UL/CSA Listed
  • Dimension Measurements = Inches
  • UL/CSA Listed
  • Order Qty of 100 = 1 Bag of 100
  • <\/ul>

ITEM: 21732

As low as $0.13
Select Product

Rigid Nipples

ITEM:14480

As low as$0.35
Product Badge Image 4

Features include:

  • Use with Rigid Coupling to Terminate Threaded Conduit to a Knockout, Box or Enclosure, where space is limited within the box
  • Use with a Locknut to provide a Short Raceway between Boxes and enclosures
  • Die Cast Zinc
  • UL/CSA or cULus Listed
  • Order Qty of 1 = 1 Pieces
  • <\/ul>
Product Badge Image 4

ITEM: 14480

As low as $0.35
Select Product

Rigid Offset Nipples

ITEM:14460

As low as$1.08

Features include:

  • Use as an Offset Connector between Two Enclosures
  • Use To Offset the Axis of Raceways 3/4 in.
  • Die Cast Zinc
  • UL/CSA Listed
  • Order Qty of 1 = 1 Pieces
  • <\/ul>

ITEM: 14460

As low as $1.08
Select Product

Malleable Rigid Split Couplings

ITEM:14452

As low as$21.43
Product Badge Image 4

Features include:

  • Used as A Speed Union for Economically Joining 2 Threaded Rigid Metal Conduits
  • Use where Conduit Runs are Closely Spaced; or Conduit is tight against Wall, Ceiling or other Obstruction
  • Use where Conduits cannot be Turned
  • A Neoprene Gasket provides a Concrete Tight Seal at the Joint
  • Order Qty of 1 = 1 Pieces
  • <\/ul>
Product Badge Image 4

ITEM: 14452

As low as $21.43
Select Product

Malleable Rigid 3 Piece Couplings

ITEM:14440

As low as$2.85
Product Badge Image 4

Features include:

  • Used to Join 2 lengths of Threaded Conduit when Neither Can Be Rotated
  • Threaded (NPT) for Rigid Conduit and IMC
  • Concrete Tight
  • cULus Listed
  • Order Qty of 1 = 1 Pieces
  • <\/ul>
Product Badge Image 4

ITEM: 14440

As low as $2.85
Select Product

Straight Malleable Concrete Slab Inserts

ITEM:14420

As low as$8.45

Features include:

  • Allows In-Slab Ceiling Drops & Floor Mounts in Poured Concrete
  • Provides Flush Threaded Conduit Hub for mounting, pulling, & future access to conduit systems
  • Design allows In-Slab Conduit System Prefabrication
  • Designed for Straight Through Conduit Runs and Mounting of Floor boxes in slabs over 6 in. thick
  • Concrete Tight
  • Order Qty of 1 = 1 Pieces
  • <\/ul>

ITEM: 14420

As low as $8.45
Select Product

Rigid to Box Pulling Elbows

ITEM:14404

As low as$3.63

Features include:

  • For Connecting Threaded Rigid or IMC Conduit to Box or Enclosures to Form 90" bend
  • Removable Cover allows easy access to facilitate wire pulling
  • Furnished with Neoprene Gasket and Cover
  • Rain Tight
  • UL/CSA Listed
  • Order Qty of 1 = 1 Pieces
  • <\/ul>

ITEM: 14404

As low as $3.63
Select Product

Rigid to Rigid Pulling Elbows

ITEM:14400

As low as$3.54

Features include:

  • For use as a Wire Pulling Elbow to Facilitate Wire Pulling on a Sharp Bend in run of Threaded Rigid or IMC Conduit
  • Removable Cover allows easy access to facilitate wire pulling
  • Furnished with Neoprene Gasket and Cover
  • Rain Tight
  • UL/CSA Listed
  • Order Qty of 1 = 1 Pieces
  • <\/ul>

ITEM: 14400

As low as $3.54
Select Product

Rigid Short Radius Elbows

ITEM:14408

As low as$3.36
Product Badge Image 4

Features include:

  • For Connecting Rigid Conduit or IMC to an Outlet Box in Tight Radius Applications where a Full Size Elbow Will Not Fit
  • Zinc Die Cast
  • NPT Thread
  • cULus Listed
  • Order Qty of 1 = 1 Pieces
  • <\/ul>
Product Badge Image 4

ITEM: 14408

As low as $3.36
Select Product

Malleable Rigid Set Screw Couplings

ITEM:14350

As low as$3.40
Product Badge Image 4

Features include:

  • Connect 2 Sections of Thread-less Rigid Conduit
  • Malleable Iron
  • Concrete Tight
  • Zinc Finish
  • cULus Listed
  • Order Qty of 1 = 1 Pieces
  • <\/ul>
Product Badge Image 4

ITEM: 14350

As low as $3.40
Select Product

Malleable Rigid Set Screw Box Connector

ITEM:14340

As low as$2.96
Product Badge Image 4

Features include:

  • Connect Thread-less Rigid Conduit to boxes and enclosures
  • Malleable Iron
  • Concrete Tight
  • Male Hub Thread (NPT)
  • Zinc Finish
  • cULus Listed
  • Order Qty of 1 = 1 Pieces
  • <\/ul>
Product Badge Image 4

ITEM: 14340

As low as $2.96
Select Product