Service Entrance Connectors

22 products
Type S with Screw & Bar Knockout Seals

Type S with Screw & Bar Knockout Seals

Features include:

  • Set screw/bar type knockout seals are inserted in open box knockouts to protect exposed wires
  • Used in standard, air tight or dust tight applications
  • Pre-assembled screw and backer bar slides on open knockout holes without removing box devices or covers
  • Steel Galvanized
  • Order Qty of 1 = 1 Piece

ITEM: 21790

Regular price $0.83 Sale price$0.69
Select Product
Malleable U-Bolt Pipe Clamps

Malleable U-Bolt Pipe Clamps

Features include:

  • Recommended for supporting or guiding heavy loads along runs of non-insulated pipe
  • 2 hex nuts
  • Malleable Iron - Galvanized
  • Order Qty of 1 = 1 Piece

ITEM: 21840

Regular price $1.16 Sale price$0.96
Select Product
Under-Ground Feed UF To Box Connector, Zinc Die Cast

Under-Ground Feed UF To Box Connector, Zinc Die Cast

Features include:

  • Used to Connect Underground Feeder Cables (UF) To Weatherproof Enclosures in Wet Locations.
  • Assembled with a Rubber Grommet and Steel Washer
  • Sealing Locknut System
  • Zinc Die Cast
  • Dimension Measurements = Inches
  • cULus Listed
  • Order Qty of 1 = 1 Piece
Product Badge Image 4

ITEM: 15386

Regular price $1.94 Sale price$1.62
Select Product
Service Entrance Insulator Wire Holder

Service Entrance Insulator Wire Holder

Features include:

  • Ceramic Service Entrance Wire Insulator with 2 in. Conduit/Pipe Hanger Clamp
  • Fits 2 in. Rigid or EMT Conduit
  • Order Qty of 1 = 1 Piece

ITEM: 21897

Regular price $10.54 Sale price$8.78
Select Product
Kenny Clamp

Kenny Clamp

Features include:

  • The Kenny Clamp bonds the enclosure of a service panelboard, load center, separately derived system or switchboard to the grounding electrode conductor per the requirements of NEC 250.8; 312.5(A); 250.53 D)(2); 250.52 (A)(1); 250.52(A)(3); 250.66; 250.104 (D)(1); 250.24; 450.10(A)
  • UL 467 listed connector for use with Equipment Ground Conductors, Ground Electrode Conductors and Bonding Jumpers
  • Assures good metallic connection and low impedance path for grounding and bonding of electrical equipment
  • 12000 amp listed and tested
  • Material: Brass
  • Dimension Measurements = Inches
  • UL Listed
  • Order Qty of 1 = 1 Piece

ITEM: 15390

Regular price $14.12 Sale price$11.76
Select Product
Steel Snap-In Blanks

Steel Snap-In Blanks

Features include:

  • For use in closing off unused openings in boxes or panel boards
  • All steel construction provides installation integrity
  • Snap-Fit Design
  • Order Qty of 1 = 1 Piece

ITEM: 21800

Regular price $0.16 Sale price$0.13
Select Product
Aluminum Service Entrance Head

Aluminum Service Entrance Head

Features include:

  • Conduit Mount Head used with Rigid or IMC for Pulling Service Entrance Conductors
  • Assembled with electrical grade phenolic insulator with multiple holes
  • Die Cast Aluminum
  • Suitable for Outdoor use - Weather resistant
  • cULus Listed
  • Order Qty of 1 = 1 Piece
Product Badge Image 4

ITEM: 15530

Regular price $4.28 Sale price$3.56
Select Product
Wedge Clamps

Wedge Clamps

Features include:

  • Designed to hold triplex overhead service entrance cable to a mounting structure
  • Aluminum wedge and shell with a stainless-steel ball
  • Can be used indoors or outdoors
  • Installs Quickly and Easily
  • Corrosion resistant
  • Order Qty of 1 = 1 Piece

ITEM: 28881

Regular price $3.17 Sale price$2.64
Select Product
Non-Metallic Service Entrance Cable Hood

Non-Metallic Service Entrance Cable Hood

Features include:

  • Provides Protection to Service Entrance Cables
  • Non-Metallic PVC construction
  • Suitable for Outdoor use
  • Order Qty of 1 = 1 Piece

ITEM: 15500

Regular price $11.76 Sale price$9.80
Select Product
Porcelain Wireholders Heavy Duty Adjustable 1-1/4 in. X 3 in.

Porcelain Wireholders Heavy Duty Adjustable 1-1/4 in. X 3 in.

Features include:

  • Ceramic wire holder has a steel reinforced saddle for use with pipe or pole attachment
  • Adjustable Steel Clamp
  • Fits 1-1/4 in. to 3 in. Conduit/Pipe
  • Order Qty of 1 = 1 Piece

ITEM: 21898

Regular price $12.02 Sale price$10.02
Select Product
Conduit Support

Conduit Support

Features include:

  • Used to secure Service Entrance Conduit to the Outside surface of a building
  • 1/2 in. x 10 in. Bolt
  • Machined Bolt and Nut
  • Zinc Plated Steel
  • Order Qty of 1 = 1 Piece

ITEM: 21833

Regular price $12.17 Sale price$10.15
Select Product
Porcelain Wireholders Heavy Duty Reinforced 3/8 in. x 2-1/4 in. Lag

Porcelain Wireholders Heavy Duty Reinforced 3/8 in. x 2-1/4 in. Lag

Features include:

  • Heavy duty porcelain head wire holder has reinforced saddle
  • Made with Porcelain and Galvanized Steel
  • Single point wire holders are strong and compact
  • Solid Rivet through head
  • Quick and easy installation for most projects
  • For use with wooden constrcution
  • Dimension Measurements = Inches
  • Order Qty of 1 = 1 Piece

ITEM: 21896

Regular price $6.89 Sale price$5.75
Select Product
Aluminum Service Entrance Cap

Aluminum Service Entrance Cap

Features include:

  • Slip Fitter Mast Head used with Rigid or IMC Conduit for Pulling Service Drop conductors
  • Assembled with electrical grade phenolic insulator with multiple holes
  • Mast type Clamp
  • Screw Does Not Bear Directly on Conduit
  • Die Cast Aluminum
  • Suitable for Outdoor use - Weather resistant
  • UL/CSA Listed
  • Order Qty of 1 = 1 Piece

ITEM: 15540

Regular price $14.05 Sale price$11.71
Select Product
Aluminum Service Entrance Cap

Aluminum Service Entrance Cap

Features include:

  • Clamp-on type head used with Rigid conduit, IMC or E.M.T. for pulling service drop conductors
  • Assembled with electrical grade phenolic insulator with multiple holes
  • Cast Aluminum
  • Bar Type Clamp
  • Assembled with electrical grade phenolic insulator with multiple holes
  • Heavy Duty pressure clamp in body
  • Suitable for Outdoor use - Weather resistant
  • cULus Listed
  • Order Qty of 1 = 1 Piece
Product Badge Image 4

ITEM: 15520

Regular price $3.32 Sale price$2.76
Select Product
Aluminum Service Entrance Caps

Aluminum Service Entrance Caps

Features include:

  • Provides Protection to Service Entrance Cables
  • Used with Type U Service Entrance Cable
  • Removable Cap and 2 Piece Insulator Make Wire Pulling and Assembly Easy
  • Cable Clamp holds SEU Cable In Place
  • Suitable for Outdoor use
  • UL/CSA Listed
  • Order Qty of 1 = 1 Piece

ITEM: 15502

Regular price $6.44 Sale price$5.36
Select Product
Single-Point Entrance Service Wire Holder

Single-Point Entrance Service Wire Holder

Features include:

  • Single-point wire holders are strong and compact
  • Made with Porcelain and Galvanized Steel
  • Solid Rivet Through Head
  • Bolt and Nut type Wire Holder
  • Order Qty of 1 = 1 Piece

ITEM: 21899

Regular price $7.94 Sale price$6.62
Select Product
Lag Type Service Insulator Wire Holder 3/8 in. x 2-1/4 in. Screw

Lag Type Service Insulator Wire Holder 3/8 in. x 2-1/4 in. Screw

Features include:

  • Indoor or Outdoor use in Overhead Service Entrance
  • Service Insulator Wire Holder has Porcelain head on lag screw
  • These small ceramic insulators can also be used with all fence wire including high tensile, poly rope, and poly tape
  • 600Volts Max
  • Dimension Measurements = Inches
  • Order Qty of 1 = 1 Piece

ITEM: 21894

Regular price $5.96 Sale price$4.96
Select Product
Malleable Mast Support Clamp

Malleable Mast Support Clamp

Features include:

  • Used to secure Service Entrance Conduit to the Outside surface of a building
  • Hinged on one side and bolted on other side for easy installation
  • Machined Bolt and Nut
  • Malleable Iron
  • Order Qty of 1 = 1 Piece

ITEM: 21830

Regular price $11.56 Sale price$9.64
Select Product
Wire Rope Clips, Guy Wire 1/4 in.

Wire Rope Clips, Guy Wire 1/4 in.

Features include:

  • Galvanized Mallable Iron
  • Galvanized Iron Rope Clips For Guy Wire
  • Order Qty of 1 = 1 Piece

ITEM: 17302

Regular price $1.72 Sale price$1.44
Select Product
PVC Entrance Caps

PVC Entrance Caps

Features include:

  • Weather-resistant entrance caps accommodates a range of cable sizes
  • Rigid, weather-resistant material assembled with a galvanized back plate for easy installation
  • UL/CSA Listed
  • Order Qty of 1 = 1 Piece

ITEM: 21772

Regular price $6.59 Sale price$5.49
Select Product
Lag Type Service Insulator Wire Holder 1/4 in. x 1-11/16 in. Screw

Lag Type Service Insulator Wire Holder 1/4 in. x 1-11/16 in. Screw

Features include:

  • Indoor or Outdoor use in Overhead Service Entrance
  • Service Insulator Wire Holder has Porcelain head on lag screw
  • These small ceramic insulators can also be used with all fence wire including high tensile, poly rope, and poly tape
  • 600Volts Max
  • Dimension Measurements = Inches
  • Order Qty of 1 = 1 Piece

ITEM: 21892

Regular price $3.34 Sale price$2.78
Select Product
Water-Tight Service Entrance Connectors, Zinc Die Cast

Water-Tight Service Entrance Connectors, Zinc Die Cast

Features include:

  • Compression Type SEU Connector
  • Used to Connect Service Entrance Cable to a Service Enclosure in Wet Locations
  • Accepts 2 Insulated Conductors, 1 Bare
  • U/Flat Style Conductor Only
  • Assembled with Rubber Grommet and Steel Washer
  • Locknut Included
  • Zinc Die Cast
  • Dimension Measurements = Inches
  • cULus Listed
  • Order Qty of 1 = 1 Piece
Product Badge Image 4

ITEM: 15370

Regular price $4.71 Sale price$3.93
Select Product