Great brighter alternative replacement to fluorescent fixtures. These linear LED high bay fixtures use 80 percent less energy and lasting over 100,000 hours and are maintenance free. Select from multiple vendors and types.
Incredible versatility and reliability, the round UFO LED high bay light offers a wonderful alternative to traditional metal halides. Hook type mounting for easy fixture upgrade. UFO fixtures can be wired with energy saving sensors and plug and cord options as well.
Make the most of your high ceiling space with our LED high bay shop lights in several options and wattages. These are a great solution to help save on lighting costs over time. Wide selection of quality long lasting Linear, UFO and Traditional Round at a cost effective price in stock.
Hi, this is James Abraham with Warehouse-Lighting.com. I’m going to show you one of our newest products. This is our new four lamp T5 high bay. As you can see, I have plugged in for you right now. There’s several good features about this. It’s the sturdiest fixture we sell. It also has an access door in the back of the fixture. This happens to be the four lamp T5. A couple different things you can get chord with it if you’d like, you can do a 120 through 277, you can do twist locks. We will supply you with the light and the cords, but we won’t attach them to the fixtures. It also comes with hangers and also comes with two feet of chain for each one of these spots so if you’re buying it that way, you can get it supplied that way. One of the greatest features about this fixture is it only comes with a Miro-4 reflector. As you can see with those lit up. I’ll turn this off so we can get a better picture of this fixture. Unplug it here. A couple different things; access door so you can wire up your cord, pretty easy to access, it’s got the three leads coming out of it, also it has a quick disconnect in there so you don’t have to worry about your quick disconnects. Like I said before, it comes with the hangers already attached all you got to do is this is pretty much a slam and go fixture, or a put up and go fixture. It’s also got an access panel for the ballast which really takes you, if you ever have problems with the fixture, it really takes you about two seconds to unscrew, and bam, the ballast is right there. You can clip the fixture, put in the new ballast, close the door, which is hinged, put the screws back into the fixture, and you’re good to go. Like I said, this is a four lamp T5, also comes in a four lamp T8, six lamp T5, six lamp T8, all of which are really good options for this fixture. I’m telling you this is the sturdiest fixture that I built today. So, it is actually a foreign fixture so it is made in China and then brought over here. This wouldn’t be under our US made section, but let me show you the front side of this fixture. As you can see, it also does come with an option for a lens and a wire guard. Both are relatively inexpensive. Great thing about it, Miro-4 reflectors. It does have four pins in each reflector it looks like to me so it gives a little more light distribution on your floor. Let me show you a 6 lamp fixture. This is actually the 6 lamp fixture. Again, the same reflector being utilized in both of these. This happens to be a T8. We have plenty of stock on these in the United States. So, you can drop the door, I think this fixture has a GE ballast in it. This is the way it comes packaged and then basically the same thing with this one. You have more access for the quick disconnect to the side. So, with that being said, I’ll leave that off for now, you know like I said, one of the greatest things is this fixture is if you ever have to repair this fixture you don’t have to pull it down. You basically just have someone climb up for the fixture for these ballasts, this happens to be a GE Ultramax three lamper inside, have them pull the ballast, clip the leads, put it back in, and you’re good to go. It’s the most easy maintenance-able fixture we have. There’s no removable reflectors, no removable lamps so you can get away from breaking anything. You’re more than welcome to call us, ask us questions about this. I think pretty much the video really kind of shows you the positives of this, and I’m telling you this is a very rigid fixture, and here I’m trying to torque it and usually fixtures are torq-able and this one doesn’t seem to be unless I give it a lot of pressure I’m sure, but I think other than that, I think this is probably one of the best buys I have on the website today. Like I said, we have plenty of stock here in the US. You can tell, like I said, we can supply it with the cord, we can also do a motion sensor on these which is relatively cheap, I think it's fifty dollars to add a motion sensor, fifty, sixty bucks. If you have questions, please feel free to call us at 888-454-4480. Again, that’s 888-454-4480. We’re with warehouse-lighting.com. This is a Warelight fixture. It is imported. We appreciate you watching the video and have a great day.